Bladders and Bladder Repair

NEW LOWER PRICETuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under any load then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.

NEW LOWER PRICE!
Tuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available.

PKS One-Pump Hose is a heavy-duty flexible hose with higher density than standard factory one-pump hose. This means it will not just be the only replacement hose you will ever want to use, it will also last years and years. In 2 sizes: Inner Diameter (ID) 1/4" or 3/8" (6.35 or 9.5mm).

OEM Silicone One-Pump Hose is a heavy-duty flexible hose with a 1/4" inner diameter, standard factory one-pump hose. This means it will not just be the only replacement hose you will ever want to use, it will last!

Hose is sold by the foot so you can cut it to your specific needs. For more than one foot, just up the quantity when ordering. hose will be sent in 1 continous length of hose.This hose is the standard size for most valves on the market including Advance, Best, BWS, Cabrinha, Core, Crazyfly, EH, F-One, Flexifoil, Flysurfer, Liquid Force, Nobile, North, Ozone, Ocean Rodeo, RRD, Slingshot, Spleene, Star, Switch, Takoon, Vari, Wainman, and  possibly Zian

The PKS Kiteboarding One Pump Hose Kit has all you need to replace the hoses and clips for an external one pump system. Works on most kites. Easy to use and fits like the original factory set. Choice of 3 or 5-strut kit.

PKS High Flow One Pump Hose Kit - 3/8"(10mm) Inner Diameter

The PKS Kiteboarding High Flow One Pump Hose Kit has all you need to replace the hoses and clips for an external one pump system. Works on kites with the larger high flow one pump system. Easy to use and installs fast. Choice of 3 or 5-strut kit. Tubing is 3/8"(10mm) inner Diameter.

The Bladder-Patch Install Kit which includes a bladder protection sheet and a 6x6-Inch (15.24 x 15.24cm) Patch. If your screw valve has to be cut out of the old bladder, then you need the Patch Install Kit.

Fixmykite.com again brings you the latest and great kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.

Fixmykite.com again brings you the latest and great kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.

Tear Aid Bladder patches seal leaks and small cuts in bladders, the perfect repair material for bladder blowouts. These patches are self stick (peel & stick) and can be used to patch any bladder material or color.  The specially formulated adhesive is incredibly durable making for a quick repair.  Patches can be used on leading edge or strut bladders and sail materials.

PKS replacement hose clamps for kites with standard 1/4" ID one pump hose. 

Fixmykite.com again brings you the latest and greatest kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.

Fixmykite.com again brings you the latest and greatest kit to keep you kiting longer. This Pinhole patch kit includes 3 different materials for patching any part of your kite! Tear Aid patches that cover a multitude of repairs and are used mainly for pinhole leaks in bladders. Dacron patches for covering scrapes and pinholes in the Leading edge or struts. Ripstop sail tape to repair a slice or tear on your sail. You can find so many uses for this kit it will blow your mind!  All patches are cut into circles so there are no pointy corners to prevent peeling up on you.

Includes:
 

• 4 - 1.75" Dacron Patches
• 5 - 1.5" Tear Aid Patches
• 6 - 1.75" Sail Tape Patches
• 4 -  Alcohol Swabs

Seam Grip goes beyond seam sealing and patching holes. It waterproofs tents, improves traction, and offers abrasion resistance, too. It works on all types of fabrics, including nylon, vinyl, neoprene, PVC, rubber, and leather.

So take a tube of Seam Grip wherever you go, because you never know when gear will rip, leak or fall apart. Save your gear?and your adventure?with the award-winning Seam Grip waterproof seam sealer.

Aquaseal, Urethane Repair Adhesive & Sealant. The industry standard for maximum strength repairs to wet suits, dry suits and all water sports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses.
 

PKS replacement hose clamps for kites with larger 3/8" ID one pump hose. 

OEM Ozone High Volume One Pump Hose

Hose is sold by the foot so you can cut it to your specific needs. For more than one foot, just up the quantity when ordering. hose will be sent in 1 continous length of hose.


This hose works on the Ozone High Volume valves as well as Airush SPS valves (2008 and newer) and Gaastra valves.

Replacement North 2017 and older Lazy Pump Gen 1 Hose Clamps
North/Duotone Part: 44500-8038

Need Ozone Bladders not found here? Let us know what you need and we can special order for you.

If you are not sure what to order, please call 361-704-6659.

Replacement bladders for Ozone WASP V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-883-1496 to place the order.

Replacement bladders for Ozone WASP V2 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement Strut bladder for Ozone WASP V2. This is the OEM bladders with the valve already on the bladder and ready to install into the wing strut. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone WASP V3 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Flux V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Flux V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone FLOW V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone FLOW V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone FLY V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone LITEFORCE V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone LITEFORCE V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Alpha V2 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Alpha V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Catalyst V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Catalyst V2 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Catalyst V3 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for 2014 and V8 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for  V9 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for  V10 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for  V11 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for  V12 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Enduro V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Enduro V2 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Enduro V3 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Enduro V3 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Reo V4 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order

Replacement bladders for Ozone Reo V5 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order

Replacement bladders for Ozone Reo V6 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order

Replacement bladders for Ozone Reo V7 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order