Hardware

Tef-Gel is a Corrsion inhibitor and Anti-Seize lubricant that is perfect for kiteboarding hardware, specifically for your Foils and Foil boards.

M6 Hydrofoil Mounting Screws

These are M6 Stainless Steel screws for any hydrofoil that uses the M6 T-nut, which which will work on all M6 Tracked hydrofoils.  These are Hex Head (socket cap), counter sink screws

Sold individually

The Ozone Contact Bar Flag Out Ring with Swivel works on all Ozone snow and water kites for 2014+ model year. This ring is attached to the base of the flag our bungee that runs through the chickenloop.

Cabrinha Flagout Swivel

PKS Stainless steel flag out rings are useful replacements in many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

Wizardhat Hardware Set

This is the Wizardhat hardware only set.  If you just need some extra hardware

This hardware set will work with any base plate or 4-bolt tracked board on the market.  This included M8 or M6 base plates and tracks.  There is no more need for T-nuts or different sized bolts the Wizardhat will work on any.  Also, the way the bolt sticks up through the track on top makes it easy to line up with the base plate.

The Wizardhat hardware only set comes with 4 qty Wizardhat hardware (includes cone nut, t-bolt, and t-slider with a decal.   

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

PKS M6 Studs for mounting Hydrofoil on deck with inserts.

Works with M6 Inserts and m6 hardware like the Wizard Hat Cone nuts.

Includes a set of 4 M6 Studs
  

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

Wizardhat Hardware Set

This is the Wizardhat hardware only set.  If you just need some extra hardware

This hardware set will work with any base plate or 4-bolt tracked board on the market.  This included M8 or M6 base plates and tracks.  There is no more need for T-nuts or different sized bolts the Wizardhat will work on any.  Also, the way the bolt sticks up through the track on top makes it easy to line up with the base plate.

The Wizardhat hardware only set comes with 4 qty Wizardhat hardware (includes cone nut, t-bolt, and t-slider with a decal.   

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

Wizardhat Cone Nut Set with m6x25mm Studs

This is the Wizardhat Cone Nuts with m6 x 25mm Studs.  If you just need some extra hardware.

Includes a set of 4 Cone Nuts with m6 x 25mm Studs

PKS M6 Studs with M6 Flanged nuts for mounting Hydrofoil on deck with inserts.

Includes a set of 4 M6 Studs and Flanged Nuts
  

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

M8 Hydrofoil Track Stainless Steel T-Nuts

These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  These are low profile meaning they are thinner than stock brass T-nuts by about 2.2mm from top to bottom but STRONGER.

Sold individually

M6 Hydrofoil Track Stainless Steel T-Nuts

These are Replacement M6 Stainless Steel T-nuts for the any hydrofoil that uses the M6 T-nut including Takuma, Naish and others  These are hard to get replacements that we now have in stock.  They are sold individually,  so if you need a set of 4 make sure to buy 4 of them.  Watch the video below for our testing of the M8 version against the brass version.

Here are the total dimensions of this part:

Track width: 8.5mm
Total width: 14.9mm
Total length: 23.9mm
Total height: 6.20mm

M8 Hydrofoil Track Brass T-Nuts

Extra brass T-nuts for your tracked hydrofoil.  These are salt water approved and perfect for all track systems.  They are M8 standard metric threads which is the convention for most hydrofoil tracks.

Sold Individually

M8 Hydrofoil Mounting Screws

These are M8 Stainless Steel screws for any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  These are Hex Head(socket cap), counter sink screws

Sold individually

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.

Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.

Choose which Airush Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Airush kiteboards from 2013 to the current model year.

Choose which Cabrinha Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Cabrinha kiteboards from 2014 to the current model year.

Crazyfly Kiteboarding Hexa Binding screws and washers. Great replacements if you ever lose a screw on the water or during travel.

Choose which Naish Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Naish kiteboards from 2015 to the current model year.

Stainless steel rings are 1" diameter and are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 1-Inch Diameter

• 1-Inch Outer Diameter
• 3/4- Inch Inner Diameter

Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.