These Slingshot kiteboarding pigtails work great as replacement attachment point pigtails at the end of the bridle lines, on the end of your fly lines, or as replacement pulley pigtails.

These Slingshot kiteboarding pigtails work great as replacement attachment point pigtails at the end of the bridle lines, on the end of your fly lines, or as replacement pulley pigtails.

Mystic Adaptive Leash Eye

Perfect for adding a leash connection point to any harness.

Ozone Bar Floats, they work as replacements on the older Ozone Contact Water, Snow, and Race bars, or use them for building your own custom bars.

PKS Kook-Proof Pigtail Sets are complete 8-piece sets, set up in kook-proof fashion with different colors for inside and outside lines, and pre-set knots and pull-tabs for ease of use.  Replace worn pigtails or adapt almost any kiteboarding control bar to a kiteboarding kite.

The 2010-2014 Crazyfly Depower Line is the double-duty line on the 2012-2014 Crazyfly Sick Bars which acted as both a dual-line Depower line and Sheeting Strap.  These wear down over time, and it's a cheap and easy part to replace to ensure your bar ist strong and top notch.

Our Naish Depower Replacement line with strap is almost identical to the line that comes on 2009 - 2017 Naish kites.  The Naish Depower line has a stitched in loop on one end with their signature Bead/Strap combination on the other end.  It's a quick and easy fix to replace your old worn-out line.

OEM Factory Naish Depower trimline for 2012-2016 Universal and Fusion bars. High strength Spectra Line, stopper ball and expert riders leash connection with nylatron.

.

Our 2013 and newer North Depower Replacement line is almost identical to the line that comes on North kites. The North Depower line has knot on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.

Our North Depower Replacement line is almost identical to the line that comes on North kites. The North Depower line has a stitched in loop on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.

Replacement Slingshot Depower line for 2010 and newer Slingshot Comp Stick.

Our Best Depower Replacement line will work on any Depowerable Best kite, from 2007 -2009.

Slingshot Depower Handle for use on Slingshot depower line. 

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap. It is simple and incredibly easy to use.

Slingshot CSS Safety Bungee. Replaces any 2010-2014 Compstick safety bungee.

The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 2014+ kite models that have the push away release Megatron II flag out system.

The Ozone Contact Bar Flag Out Bungee for Contact V4 Foil And Water Contact Bar

The Ozone Contact Bar Flag Out Bungee for Race and Foil Race V4 Bar

Spare Flag out line

2013 (plastic bar ends, PUSH Megatron chicken loop)

V1 (soft bar ends, PUSH Megatron chicken loop)

995mm (1320mm stretched).

The Ozone Contact Bar Flag Out Bungee line for Wake and Compact V4 Bar

The Ozone Chickenloop Trim Line is the replacement line that runs from the top of the cleat depower system, up through the trimmer bracket, and down through the front side of the cleat. This line can be used on the Ozone Contact Water and Foil Freeride Control Bars V4/V5 Click-In Loop.

The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 20011-2013 kite models that have the pull release Megatron flag out system.

The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 20011-2013 kite models that have the pull release Megatron flag out system.

Naish Flag Out Line Bungee. Compatible with both Fusion and Universal Systems

The Naish Nylatron Insert with screws is the replaceable insert on all  Naish Control Systems manufactured from 2015 to current (Fusion, Alana,  and Torque).  Made of nylon, the insert dramatically reduces friction and  wear on the trim line; Included screws make this a quick and easy  replacement with a universal key.

The Crazyfly Cleat is their unique cleat for the Trim-line (Sheeting strap) on 2015 kites and newer for the 2015 CrazyFly Sick Bar.

Slingshot trim cleat for 2010 and newer Compstick Guardian. 4mm screws included

The Racer-Back Clamcleat is the most trusted cleat in Kiteboarding and used by many top brands such as Ozone. A lightweight and compact cleat on a rope. Easy to rig and adjust by hand. Amsteel/Chickenloop line can be woven through the back of cleat to secure it in place while the front side with the teeth is used as a depower cleat. The position of the cleat on the line can be adjusted by hand. No tools required.

Standard:

• Line Sizes - 3/16"-1/4"
• Size - 2 7/8" x 5/8"

Micro:

• Line Sizes - 1/8"-5/32"
• Size - 2-3/8" x 1/2"

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.

Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball included

These parrel beads are uv stable and impact resistant. Maximum rope diamenter 3/16".

Knotless StopperKnotless Stopper allows you to move the stopper anywhere on the line without undoing a knot. The knotless stopper works with flylines and leader lines. Many uses.

Stainless steel rings are 1" diameter and are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 1-Inch Diameter

• 1-Inch Outer Diameter
• 3/4- Inch Inner Diameter

Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

Tylaska Snap Shackle - Trigger Release Shackle

Tylaska T5 Trigger Release Snap Shackles are perfect for kiteboarding and small boat applications requiring immense strength and low weight. They have a breaking strength of 5,000 pounds and weigh just 2.2 ounces in the standard bail configuration.

Features:

•     17-4 PH Stainless Steel
•     5000 lb breaking strength
•     2.2 oz (59 g)
•     Highly Polished Stainless Finish

The Ozone Foil Stall/Brake handle attaches to the 2015+ Contact Water and Contact Race Control bars to convert the bar to Foil Freeride and Foil Race bars. The brake strap attaches around the relaunch balls with a bungee to the steering leader lines. These stall handles come standard on all Ozone snowkites/foils.

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.

Ozone V2 Fly Line Extensions

All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory

Features:

• Long lasting low stretch lines
• Color coded and numbered

Specs:

• Front Lines: 500kg breaking strength, 2.2mm diameter.
• Back Lines: 300kg breaking strength, 0.9mm diameter.

Includes:

• 2 - 500kg Front Lines
• 2 - 300kg Back Lines
• Line Winder

Ozone Race v2 Fly Line Extensions (2 x 300 kg & 2 x 200 kg)

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even-length lines are compatible with any Ozone Contact Water Freeride, Race bar, and many other bars on the market.

The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.

These extensions are made from Ozone race lines which are made from the highest quality, pre-stretched Dyneema available.

• High performance, low drag
• Colour-coded
• 300kg front lines, 200kg back lines

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.

Ozone V2 Fly Line Set

All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory

Features:

•     Long lasting low stretch lines
•     Colour coded and numbered
•     In-line stopper ball

Ozone Ignition Trainer line sets made to be used with the Ozone Ignition 3-line trainer kite. These lines also perfect as replacement lines for any 3-line kite or trainer.

PKS Trainer Kite Lines fly above the rest.  PKS trainer lines are 200 lbs. white lines for high-visibility, and made from Pre-stretched Spectra to several lengths to fit your Custom needs.  Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there.  

The PKS MINI Slider-Release Leash is fully releasable under load, and has removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. MINI length = 22 inches (55cm)