Control Bars and Bar Parts

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.

This is a Naish, Flag Out Stopper for the center Fly Lines. It can be used on kites that use a Single Front Line Flagout system to prevent the bar from sliding all the way to the kite when flagging out the kite or "punching out"

A simple 2 part stopper that attached to the line with a friction connection tightened by two screws.

Includes:
2 Piece Stopper
2 Screws

These parrel beads are uv stable and impact resistant. Maximum rope diamenter 3/16".

Knotless StopperKnotless Stopper allows you to move the stopper anywhere on the line without undoing a knot. The knotless stopper works with flylines and leader lines. Many uses.

Stainless steel rings are 1" diameter and are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 1-Inch Diameter

• 1-Inch Outer Diameter
• 3/4- Inch Inner Diameter

Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

Tylaska Snap Shackle - Trigger Release Shackle

Tylaska T5 Trigger Release Snap Shackles are perfect for kiteboarding and small boat applications requiring immense strength and low weight. They have a breaking strength of 5,000 pounds and weigh just 2.2 ounces in the standard bail configuration.

Features:

•     17-4 PH Stainless Steel
•     5000 lb breaking strength
•     2.2 oz (59 g)
•     Highly Polished Stainless Finish

Nasih 20m Back/Outside lines, standard lines Naish line colors, Red, Blue, Back/OutsideLines

The Ozone Foil Stall/Brake handle attaches to the 2015+ Contact Water and Contact Race Control bars to convert the bar to Foil Freeride and Foil Race bars. The brake strap attaches around the relaunch balls with a bungee to the steering leader lines. These stall handles come standard on all Ozone snowkites/foils.

Line Extensions allow you to tune your kite lines to the exact length that you want. Extensions are made in a set of four (4) from 700 lbs. line with sleeved and sewn loops on both ends.

CUSTOM lengths are possible, including mixing lengths for outer and inner lines.

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.

Ozone line extensions are made to be used with all Ozone water kites and the Ozone Contact Water, C4, or Race Control Bars. Adding extensions to your lines can give your kite that extra height to find some cleaner wind and also give you a bit more power for those lighter days.

Ozone Race v2 Fly Line Extensions (2 x 300 kg & 2 x 200 kg)

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even-length lines are compatible with any Ozone Contact Water Freeride, Race bar, and many other bars on the market.

The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.

These extensions are made from Ozone race lines which are made from the highest quality, pre-stretched Dyneema available.

• High performance, low drag
• Colour-coded
• 300kg front lines, 200kg back lines

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.

Ozone V2 Fly Line Set

All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory

Features:

•     Long lasting low stretch lines
•     Colour coded and numbered
•     In-line stopper ball

Ozone Ignition Trainer line sets made to be used with the Ozone Ignition 3-line trainer kite. These lines also perfect as replacement lines for any 3-line kite or trainer.

PKS Trainer Kite Lines fly above the rest.  PKS trainer lines are 200 lbs. white lines for high-visibility, and made from Pre-stretched Spectra to several lengths to fit your Custom needs.  Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there.  

The PKS MINI Slider-Release Leash is fully releasable under load, and has removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. MINI length = 22 inches (55cm)

The PKS Slider Handle Pass Leash is fully releasable under load by pushing the soft foam handle, and have removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. Length = 46 inches (115cm)

2019 Dakine Kite Leash Shorty. Short leash with standard push away release. If you like minimal and functional, this is the leash for you. Clean, simple, and easy to use if you ever need it.

• Stainless steel carabiner with padded cover
• 1/4" (6.5MM) highest quality urethane Dura-Cord for
• maximum strength
• Molded Opti-Flex Leash ends for maximum durability
• Push away disconnect attachment

The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.

• Stainless Steel clip
• Push-Away release
• Simple re-load
• Neoprene clip cover
• Compact size
• Designed for hooked in riding

The Ozone leash makes passing over your head and around your back even easier. Ozone quality with super strong webbing, bungee covered with extra soft neoprene, and a snap shackle for easy hooking in and out. This leash can handle anything you throw at it and is built for safety with a push away top hat quick release.

The Crazyfly Handle Pass Safety Kite Leash is their standard kite safety leash.  It features a push-away safety release with 3-D sure grip for easy releasing with confidence the first time, every time.

The 2019 Crazyfly Short Kite Leash is their standard kite safety leash.  It features a push-away safety release with 3-D sure eva foam grip for easy releasing with confidence the first time, every time.

High-grade materials mean it is both high-visibility and will last for years even with UV exposure.

The PKS EZ Leash Connect is the perfect product to put your leash attachment where you want it on your harness. Simply larkshead this to the spreader bar, leash ring, or back of the harness to create a quick accessible leash connection point.

North Replacement Standard Spare Line set - 22m Overall Length

12m + 10m Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Shorter 8m + 2m line extensions are also available as an accessory for those wanting 18m or 20m lines for wave riding or tighter kiteloops.

North Line Extension set

Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m. If you want to lengthen your lines, just choose what length works best for you!

Includes:   
4 Lines with spliced loops on both ends

Features

• SK99 Dyneema lines
• Spliced with stitched loops on all ends
• Pre-Stretched

North 6m Line Extension  - 6m

6m Dyneema line extensions for those wanting custom lines for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing.

Includes:     

• 2x 6m Lines (Green), 2x 6m Lines (Grey)

Features

• SK99 Dyneema lines
• Spliced with stitched loops on all ends
• Pre-Stretched

North Short Spare Line Set - 10m

8m + 2m Dyneema line extensions for those wanting custom 18m or 20m lines for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing.

Includes:     

• 2x 8m Lines (Green), 2x 8m Lines (Grey), 2x 2m Lines (Green), 2x 2m Lines (Grey), Line Winder

Cabrinha Flyline Stopper

The Ozone line winder will help you keep your lines nice and neat

The Ozone line winder will help you keep your lines nice and neat.

The winder is approx 18cm across at the narrowest point and 25cm across at the widest point.

The PKS line winder will help you keep your lines nice and neat. Recyclable and ECO Friendly. Sturdy, Strong sand will last.

Approximate Dimensions:
Widest Pont - 25cm
Winding Area - 18cm
Height - 11cm

The PKS Flyline Pigtail Stopper Loop is a simple stopper for use on a flyline connection to a trimmer bracket or line organizer to dead end the fly line.

Replacement PU for Crazyfly Sick bar.

Four Line cluster can be used to build your custom bar. Is capable of being used for 4 line or 5 line. dimension 3.5cm x 2.5cm

Three line cluster can be used to make a custom 4 line bar. Dimensions 2cm x 1cm.