Repair Parts By Brand

Ozone trimmer handle for V4 or older

Duotone Item No. 44900-8168

Front Line Connector Pigtail Trust(SS18-SS22)

Compatibalility:
2018-2022 Duotone / North Trust Bar

Duotone Item No. 44210-8107

Red Safety Line for Click Bar (SS18-22)

Compatibalility:
2018-2022 Duotone / North Click Bar

Duotone Item No. 44900-8191

Iron Heart Stopper Ball & Ring Click Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Click Bar

North Kiteboarding replacement Power Bracket for Navigator control system.

Replacement Sensor Bar Safety Line

For Sensor 2s and Sensor 3

Replacement Naish OEM Pulley Bridle Line and Slider set for a complete Bridle refresh. This is a replacement for the small section of bridle line and the slider ring slides for Naish Kites.

Includes 2 Pulley Line and 4 stopper balls, and 2 Slider Rind w/pigtails.

Lower Landing SLF Line - Recoil(RCL)
Recoil Part - K9PCLNSLF000RCL

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System

Replacement Blue Trim line for the Ozone Race Bar depower system

The Ozone Contact Bar Flag Out Ring with Swivel works on all Ozone snow and water kites for 2014+ model year. This ring is attached to the base of the flag our bungee that runs through the chickenloop.

Ozone Ignition v3 - 3-Line Universal Trainer Kite

Designed to bring out the kiter within everyone, the Ignition 3-line trainer kite is smooth and stable with steady response and power to ensure easy progression into all kite sports.

The Ignition V3 features our market leading Internal Landing and Re-Launch System - this unique system combined with the Wrist Leash gives you the ability to safely land the kite by yourself and guarantees easy re-launch. If you feel too much power or are ever unsure all you have to do is let go of the bar, the kite will land automatically with minimal power until you are ready to re-launch.

Ozone Ignition v3 - 3-Line Universal Trainer Kite

Designed to bring out the kiter within everyone, the Ignition 3-line trainer kite is smooth and stable with steady response and power to ensure easy progression into all kite sports.

The Ignition V3 features our market leading Internal Landing and Re-Launch System - this unique system combined with the Wrist Leash gives you the ability to safely land the kite by yourself and guarantees easy re-launch. If you feel too much power or are ever unsure all you have to do is let go of the bar, the kite will land automatically with minimal power until you are ready to re-launch.

Ozone Ignition v3 - 3-Line Universal Trainer Kite

Designed to bring out the kiter within everyone, the Ignition 3-line trainer kite is smooth and stable with steady response and power to ensure easy progression into all kite sports.

The Ignition V3 features our market leading Internal Landing and Re-Launch System - this unique system combined with the Wrist Leash gives you the ability to safely land the kite by yourself and guarantees easy re-launch. If you feel too much power or are ever unsure all you have to do is let go of the bar, the kite will land automatically with minimal power until you are ready to re-launch.

Ozone Ignition v3 - 3-Line Universal Trainer Kite

Designed to bring out the kiter within everyone, the Ignition 3-line trainer kite is smooth and stable with steady response and power to ensure easy progression into all kite sports.

The Ignition V3 features our market leading Internal Landing and Re-Launch System - this unique system combined with the Wrist Leash gives you the ability to safely land the kite by yourself and guarantees easy re-launch. If you feel too much power or are ever unsure all you have to do is let go of the bar, the kite will land automatically with minimal power until you are ready to re-launch.

The Slingshot One Pump Self-Stick-Valve will replace any slingshot kite with a one-pump system.  This valve is also compatible with Ozone one-pump systems. 

The Slingshot Chickenloop PU is the replacement of the lower part of the chickenloop assembly for the 2010-2013 compstick push-away release system. This line can be used to easily replace the line on your chickenloop.

The Naish Surelock High Flow Inflate / Deflate Valve for 2020 and Newer Naish Kites and Wings.

Also Works on: 2021+ Crazyfly Kites,F-One, Flysurfer with SUP style valve.

The Ozone Contact Water Freeride Control Bar is Ozone's latest control bar featuring brand new soft-bar ends, a push-away release system, and an above-the-bar clamcleat depower system. The Ozone bar is the cleanest control bar on the market.

A clean and simple design, the Ozone Contact Water Freeride Control Bar features an easy-to-use trim system and features our latest innovation - the Ozone Megatron Click-In Loop. The Ozone bar is the cleanest control bar on the market.

The innovative Ozone Megatron Click-In Loop is an all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand; it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply 'clicking' in the loop. The Click-In Loop is AFNOR NF S52-503 certified.

What's the first thing you do when you get in a car? You click in your seatbelt, hearing that 'click' sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our new release system, the Click-In Loop, is inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.

The Contact Water Control System V4 comes in 38cm, 45cm, 50cm, and 55cm bar lengths and ships standard with a medium size loop.

​

Features

•  Exceptional Ozone Factory Construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
•  Innovative Click-In Loop - An all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply 'clicking' in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
•  Two Release Modes - The Click-In Loop offers riders a choice of two release modes, the recommended Standard or the optional Expert mode.
  • Standard mode offers 100% flag out in all situations by releasing the Click-In Loop or letting go of the bar when un-hooked.
  • Expert mode offers 100% flag out only when the Click-In Loop is released whilst hooked in, allowing riders practicing handle passes to miss the bar without releasing the kite to flag out (not recommended).
•  Three Loop Size Options - Small, Medium and Large size harness loops are available for the Click-In Loop. Choose the Small if you ride hooked in only, have a shorter arm reach or prefer the bar closer to your body. The Medium size is perfect for most riders. The Large size is designed for unhooking or riders with a longer arm reach.
•  Spinning Head with Anti-twist Flag Out Line - Our custom Stainless Steel Swivel Ring locates into the Click-In Loops rotating internal core. When manually turning the Spinning Head to un-twist front lines, the Flag Out Line rotates in unison with the core keeping all lines twist free.
•  Soft Bar Ends with Leader Line Adjustment - Soft bar ends for comfort and are less likely to damage lightly constructed boards. The leader lines are adjustable via knots inside the float, simply pull out from the opening to access and adjust to your preference.
•  Stainless Steel Leader Line Pin - Superior strength is achieved with a Stainless pin running through the bar. This creates an ultra strong and direct connection between the control bar to flying lines.
•  Light Weight Aluminum Center Piece - CNC cut Aluminum center piece reduces weight. The low friction design reduces wear.
•  Ergonomic EVA Grip - 3D pressed EVA grip with ergonomic shaping provides the ultimate bar grip.
•  PU Covered De-Power Line - The tough PU covered de-power line significantly reduces wear when sheeting in and out.
•  Stainless Steel Trimmer Bracket - The smooth running trimmer bracket prevents trim line wear.
•  Clamcleat Trimmer - Anodized low abrasion Clamcleat trimmer with custom designed trim grab handle.
•  Re-launch Balls - Fixed to the leader lines to pull when re-launching the kite.
•  500kg/300kg Flying Lines - Color coded 500kg front / 300kg back lines using the highest quality Dyneema available.

The FixMyKite.com Slingshot one-pump v2 kiteboarding valve replaces newer high flow Slingshot one-pump system.

Ozone Hook Knife with Stainless Steel Blade, PU covered Pull Loop.

Better to have it and never need it than to need it and not have it!

KITE SAFETY KNIFE & POUCH
Convenient pouch for simple harness attachment.
Instant kite line cutting capability.
Compatible with all AK spreader bars.

The AK Kite Knife & Safety Pouch can be placed anywhere on your harness by attaching it through the attachment loop. The AK Kite Safety Knife can also be placed into the built-in pouch of the AK spreader bars.

For emergencies, the AK Kite Safety Knife will instantly cut through kite lines in case you ever get tangled.

The Naish 200 one pump valves are the original factory valves for Naish kites from 2020 model year and newer. The 90 degree one pump valve is for the struts and the Straight valve is for the leading edge.

Fixmykite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The Naish 200 one pump valves are the original factory valves for Naish kites from 2020 model year and newer. The 90 degree one pump valve is for the struts and the Straight valve is for the leading edge.

Fixmykite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The Ozone Contact Foil Freeride Control Bar is meant for use with Ozone's latest depowerable foil kites: the Hyperlink, Chrono, and R1. Featuring brand new soft-bar ends, a push-away release system, an above-the-bar clamcleat depower system, and a brake strap for help with foil kite launching, landing, and inflating.

A clean and simple design, the Ozone Contact Foil Freeride Control Bar features an easy-to-use trim system and features our latest innovation - the Ozone Megatron Click-In Loop.

The innovative Ozone Megatron Click-In Loop is an all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply 'clicking' in the loop. The Click-In Loop is AFNOR NF S52-503 certified.

What's the first thing you do when you get in a car? You click in your seatbelt, hearing that 'click' sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our new release system, the Click-In Loop, is inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.

The Contact Foil Control System V4 comes in 38cm, 45cm, 50cm, and 55cm bar lengths with foil brake handle and ships standard with a medium size loop.

​

Features

•  Exceptional Ozone Factory Construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
•  Innovatice Click-In Loop - An all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply 'clicking' in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
•  Two Release Modes - The Click-In Loop offers riders a choice of two release modes, the recommended Standard or the optional Expert mode.
  • Standard mode offers 100% flag out in all situations by releasing the Click-In Loop or letting go of the bar when un-hooked.
  • Expert mode offers 100% flag out only when the Click-In Loop is released whilst hooked in, allowing riders practicing handle passes to miss the bar without releasing the kite to flag out (not recommended).
•  Three Loop Size Options - Small, Medium and Large size harness loops are available for the Click-In Loop. Choose the Small if you ride hooked in only, have a shorter arm reach or prefer the bar closer to your body. The Medium size is perfect for most riders. The Large size is designed for unhooking or riders with a longer arm reach.
•  Spinning Head with Anti-twist Flag Out Line - Our custom Stainless Steel Swivel Ring locates into the Click-In Loops rotating internal core. When manually turning the Spinning Head to un-twist front lines, the Flag Out Line rotates in unison with the core keeping all lines twist free.
•  Soft Bar Ends with Leader Line Adjustment - Soft bar ends for comfort and are less likely to damage lightly constructed boards. The leader lines are adjustable via knots inside the float, simply pull out from the opening to access and adjust to your preference.
•  Stainless Steel Leader Line Pin - Superior strength is achieved with a Stainless pin running through the bar. This creates an ultra strong and direct connection between the control bar to flying lines.
•  Light Weight Aluminum Center Piece - CNC cut Aluminium centre piece reduces weight. The low friction design reduces wear.
•  Ergonomic EVA Grip - 3D pressed EVA grip with ergonomic shaping provides the ultimate bar grip.
•  PU Covered De-Power Line - The tough PU covered de-power line significantly reduces wear when sheeting in and out.
•  Stainless Steel Trimmer Bracket - The smooth running trimmer bracket prevents trim line wear.
•  Clamcleat Trimmer - Anodized low abrasion Clamcleat trimmer with custom designed trim grab handle.
•  Re-launch Balls - Fixed to the leader lines to pull when re-launching the kite.
•  500kg/300kg Flying Lines - Colour coded 500kg front / 300kg back lines using the highest quality Dyneema available.

The Ozone Performance Foil Kompressor Bag keeps the leading edge plastic profile battens contained in the same way we pack the kites in our factory and the same way paragliders are packed. We highly recommend using it as this protects the kite and the leading edge battens from potential deformation. Light weight and durable.

The Naish XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Naish Kites.  This valve is also campatabile for use on Airush 2015 and later kites.

Ozone kite compression strap.  Comes standard with all water and snow  kites and this spare strap works great to keep your kite neat and  folded.<br />

The Naish Surelock High Flow Inflate / Deflate Valve for 2020 and Newer Naish Kites and Wings.

Also Works on: 2021+ Crazyfly Kites,F-One, Flysurfer with SUP style valve.

The Naish XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Naish Kites.

The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve).  Choose from male, famale, or both to complete your replacement

The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve).  Choose from male, famale, or both to complete your replacement.

The Duotone/North Airport Inflate/Deflate Valve will replace the inflate/deflate on all North 2014-2018 models except the 2014 Vegas and all 2019 Duotone kites.This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.  Made with TearAid to work with any bladder.

From the leader in repair technology, FixMyKite.com's Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

NORTH HYPERFLOW INFLATE VALVE works on new North kites starting in 2020 and beyond. Valves also work on Slingshot, Cabrinha, and Eleveight kites. Made with Tear-Aid to work with any bladder

How to install a fixmykite.com self stick valve?

1. Valve Removal: If replacing valve, carefully peel off old valve. If old valve does peel off, cut around circumference of valve to remove
2. Cleaning: Wipe area where valve will be placed with provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

*Pro Tip- Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the Fixmykite self stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.

If you’re unsure which value is required for your replacement project, please do not hesitate to contact us. Email:  [email protected] or Call 361-883-1473


Add Velcro Option
The "Add Velcro" option provides you with attached Velcro at the base of the valve just as you would see with the original factory bladder.  This part of the valve goes on the inside of the kite casing; the Velcro prevents the bladder from twisting when tightening the screw-cap. 

MEGA Option: The MEGA valve option refers to the size of the TEAR-AID PATCH ONLY.  MEGA patches are 4 inches in diameter as opposed to the standard valve patch which has a 3” diameter. This extra inch means 77% more adhesive base and surface area compared to the standard valve patch size. The MEGA-valve patch is necessary when the old valve is cut from the bladder or leaves a tear during removal. The additional surface area provided by the Mega valve Tear-Aid patch allows quick and easy bladder repair eliminating the need for an additional bladder patch. The Mega Valve Patch can also be used if the valve area of the bladder is warped.

If your old valve(s) cleanly peel(s) off, a larger Mega patch in most cases isn’t necessary.

Add Bladder Patch Install Kit Option
The Bladder Patch Install Kit is for use when your old valve has to be cut out of the bladder leaving a hole larger than the valve. If your old valve peels off of your bladder easily, you do NOT need the bladder patch kit. The Bladder Patch Install Kit includes a baggie of talcum powder and a 6x6-Inch (15.24 x 15.24cm) adhesive patch.

The FixMyKite.com North Lazy Pump Gen. 2 Valve is the OEM valve North kites used for all one-pump connections from 2013-current 2016 models (Generation 2). Made with TearAid to work with any bladder.  (Also compatible with 2015 or newer CrazyFly One-Pump systems.)

The FixMyKite.com North Lazy Pump Gen. 1 Valve is the OEM valve North kites used for all one-pump connections from 2011-2012 (Generation 1). These also will work on the Best Kites' one-pump systems from 2013 and newer. Made with TearAid to work with any bladder.

The FixMyKite.com North Airport Inflate/Deflate Valve will replace the inflate/deflate on all 2014-2016 models except the 2014 Vegas.  This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.

The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs through the center of the chickenloop, bar, and depower system. This line can be used to easily replace the lines on Ozone Contact water bars 2011+ model year for both Ozone Megatron and Megatron II Chickenloops.

The FixMyKite.com Duotone 90 Degree One Pump Valve is the OEM valve Dupotone kites uses for Struts One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

Slingshot Sentry V1.1 Control Bar

The Sentry V1.1 kite bar has new PU coated center lines which allow for smooth & effortless bar travel with added durability. Our all new quick release is proven and ISO certified, ensuring the quickest and most dependable safety release.

Click-in chicken loop technology meets intuitive, auto-swivel, and line untwisting in this all-new, state-of-the-art control bar. The Sentry bar has been thoroughly tested and is proudly ISO-approved.

Slingshot is proud to introduce the pinnacle of kiteboarding control systems: the Sentry V1.1. They have combined comfort, performance, and dependability into one elegant design that gives riders a cleaner, easier, and higher performance experience on the water. By collaborating with their team riders and listening to their customers Sentry designers dissected their past control bar technology and developed one of the most comprehensive and intuitive systems on the market.

The FixMyKite.com Duotone Straight One Pump Valve is the OEM valve Dupotone kites uses for Leading Edge One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The Ozone Big Boston Inflate/deflate kiteboarding Valve will replace the inflate/deflate on 2011 and newer Ozone Kite. This valve is also a compatable replacement for the Max Flow Valve from Liquid Force Kite (2011 and later) and All Switch kites. 

Ozone pigtails for a 4-line kite. These replacement pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

The Ozone 90-Degree One Pump valve is the original factory valve for 2014 and newer Ozone kites with a one-pump system. Low-profile shape will also retro-fit onto any 2007-2013 Ozone kite with a one-pump system. This valve is also a compatible replacement for Slingshot, 2013 Crazyfly, Star, Flexifoil, Mutiny, and Ben Wilson kites.

All new High Volume valve for 2021. A higher volume valve with a and more stable material to prolong the life of the valves is now being used.

This Valve requires the use of a larger diameter one pump hose

All new High Volume valve for 2021. A higher volume valve with a and more stable material to prolong the life of the valves is now being used.

This Valve requires the use of a larger diameter one pump hose

Ozone pigtails for a 4-line kite. These replacement pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

Ozone replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

*Pro Tip - Don't forget to always check kite's pigtails for wear and tear.

Set includes two loop -  knot pigtails.

Ozone replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

*Pro Tip - Don't forget to always check kite's pigtails for wear and tear.

Set includes two loop - 3 knot pigtails.

Replecement Bridle line for Ozone Kites with Un Sheathed Technora (kevlar) Line.

Bridle Line Applicability:

Sheathed Dyneema 10-300 Grey - 300 kg  - Sheathed Bridle Line Most Waterkites (not Edge or UltraX models)
Sheathed Dyneema 10-200 Grey - 200 kg  - Sheathed Bridle Line (Enduro V5, ReoV7, Zephyr V8 (mids), Alpha V3)         
Sheathed Dyneema 10-200 Red - 200 kg  - Water Kites - back leader line on Kites        
Sheathed Dyneema 10-200 Blue - 200 kg - Water Kites - back leader line on Kites         
Sheathed Dyneema 6480-130 Grey - 130 kg  - Sheethed bridle line foil kites (not R1) and Zephyr V8 Ultra X (uppers)    
Sheathed Dyneema 6480-090 Grey - 90  - Sheethed bridle line foil kites (not R1)        
Sheathed Dyneema 6480-130 Yellow - 130 kg  -  Sheathed Brake bridle line foil kites (lowers)  (not R1)    
Sheathed Dyneema 6480-090 Yellow  - 90 kg - Sheathed Brake bridle line foil kites (uppers)  (not R1)
Unsheathed Dyneema 9200-070-020 - 70 kg  - Bridle line ChronoV1, R1 V1, SubZero UL, Explore V1 UL, Explore V2     
Unsheathed Dyneema 9200-130-020  - 130 kg - Bridle line ChronoV1, R1 V1, SubZero UL, Explore V1 UL, Explore V2        
Unsheathed Dyneema 9200-300-020  - 300 kg  - Bridle line ChronoV1, R1 V1, SubZero UL, Explore V1 UL, Explore V2    
Unsheathed Technora 8000-230 Grey  - 230 kg - Edge (all Versions); Reo V7 UltraX        
Unsheathed Technora 8000-470 Red - 470 kg  - Speedsystem Line R1 V2, V3 PA1, PA2 R1V2, R1V3
Unsheathed Technora 8000-190 Red - 190 kg  - Bridle line R1 V2, V3, V4, V5         
Unsheathed Technora 8000-130 Red - 130 kg  - Bridle line R1 V2, V3, V4, V5          
Unsheathed Technora 8000-090 Red - 90 kg  - Bridle line R1 V2, V3, V4, V5         
Unsheathed Technora 8000-070 Red - 70 kg  - Bridle line R1V2, V3, V4, V5         
Unsheathed Technora 8000-050 Red - 50 kg  - Bridle line R1V2, V3, V4, V5         
Unsheathed Technora 8000-025 Red - 25 kg  - Bridle line R1V2, V3, V4, V5