Repair Parts By Brand

Ozone kite compression strap.  Comes standard with all water and snow  kites and this spare strap works great to keep your kite neat and  folded.<br />

The Duotone/North Airport Inflate/Deflate Valve will replace the inflate/deflate on all North 2014-2018 models except the 2014 Vegas and all 2019 Duotone kites.This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.  Made with TearAid to work with any bladder.

From the leader in repair technology, FixMyKite.com's Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The Crazyfly Lock Tube (donkey stick as they call it), is a simple but flexible one-piece tube that fits right on the chickenloop itself to keep the chickenloop locked onto your spreader bar.  This avoids any potential accidental unhooking.

Slingshot replacement lock tube (Donkey Dik) for the chickenloop on Slingshot Compsticks from 2010 - 2014

NORTH HYPERFLOW INFLATE VALVE works on new North kites starting in 2020 and beyond. Valves also work on Slingshot, Cabrinha, and Eleveight kites. Made with Tear-Aid to work with any bladder

How to install a fixmykite.com self stick valve?

1. Valve Removal: If replacing valve, carefully peel off old valve. If old valve does peel off, cut around circumference of valve to remove
2. Cleaning: Wipe area where valve will be placed with provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

*Pro Tip- Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the Fixmykite self stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.

If you’re unsure which value is required for your replacement project, please do not hesitate to contact us. Email:  [email protected] or Call 361-883-1473


Add Velcro Option
The "Add Velcro" option provides you with attached Velcro at the base of the valve just as you would see with the original factory bladder.  This part of the valve goes on the inside of the kite casing; the Velcro prevents the bladder from twisting when tightening the screw-cap. 

MEGA Option: The MEGA valve option refers to the size of the TEAR-AID PATCH ONLY.  MEGA patches are 4 inches in diameter as opposed to the standard valve patch which has a 3” diameter. This extra inch means 77% more adhesive base and surface area compared to the standard valve patch size. The MEGA-valve patch is necessary when the old valve is cut from the bladder or leaves a tear during removal. The additional surface area provided by the Mega valve Tear-Aid patch allows quick and easy bladder repair eliminating the need for an additional bladder patch. The Mega Valve Patch can also be used if the valve area of the bladder is warped.

If your old valve(s) cleanly peel(s) off, a larger Mega patch in most cases isn’t necessary.

Add Bladder Patch Install Kit Option
The Bladder Patch Install Kit is for use when your old valve has to be cut out of the bladder leaving a hole larger than the valve. If your old valve peels off of your bladder easily, you do NOT need the bladder patch kit. The Bladder Patch Install Kit includes a baggie of talcum powder and a 6x6-Inch (15.24 x 15.24cm) adhesive patch.

The FixMyKite.com North Lazy Pump Gen. 2 Valve is the OEM valve North kites used for all one-pump connections from 2013-current 2016 models (Generation 2). Made with TearAid to work with any bladder.  (Also compatible with 2015 or newer CrazyFly One-Pump systems.)

The FixMyKite.com North Lazy Pump Gen. 1 Valve is the OEM valve North kites used for all one-pump connections from 2011-2012 (Generation 1). These also will work on the Best Kites' one-pump systems from 2013 and newer. Made with TearAid to work with any bladder.

The FixMyKite.com North Airport Inflate/Deflate Valve will replace the inflate/deflate on all 2014-2016 models except the 2014 Vegas.  This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.

The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs through the center of the chickenloop, bar, and depower system. This line can be used to easily replace the lines on Ozone Contact water bars 2011+ model year for both Ozone Megatron and Megatron II Chickenloops.

The FixMyKite.com Duotone 90 Degree One Pump Valve is the OEM valve Dupotone kites uses for Struts One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

Slingshot Sentry V1.1 Control Bar

The Sentry V1.1 kite bar has new PU coated center lines which allow for smooth & effortless bar travel with added durability. Our all new quick release is proven and ISO certified, ensuring the quickest and most dependable safety release.

Click-in chicken loop technology meets intuitive, auto-swivel, and line untwisting in this all-new, state-of-the-art control bar. The Sentry bar has been thoroughly tested and is proudly ISO-approved.

Slingshot is proud to introduce the pinnacle of kiteboarding control systems: the Sentry V1.1. They have combined comfort, performance, and dependability into one elegant design that gives riders a cleaner, easier, and higher performance experience on the water. By collaborating with their team riders and listening to their customers Sentry designers dissected their past control bar technology and developed one of the most comprehensive and intuitive systems on the market.

The FixMyKite.com Duotone Straight One Pump Valve is the OEM valve Dupotone kites uses for Leading Edge One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The Ozone Big Boston Inflate/deflate kiteboarding Valve will replace the inflate/deflate on 2011 and newer Ozone Kite. This valve is also a compatable replacement for the Max Flow Valve from Liquid Force Kite (2011 and later) and All Switch kites. 

Ozone pigtails for a 4-line kite. These replacement pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

The Ozone 90-Degree One Pump valve is the original factory valve for 2014 and newer Ozone kites with a one-pump system. Low-profile shape will also retro-fit onto any 2007-2013 Ozone kite with a one-pump system. This valve is also a compatible replacement for Slingshot, 2013 Crazyfly, Star, Flexifoil, Mutiny, and Ben Wilson kites.

All new High Volume valve for 2021. A higher volume valve with a and more stable material to prolong the life of the valves is now being used.

This Valve requires the use of a larger diameter one pump hose

All new High Volume valve for 2021. A higher volume valve with a and more stable material to prolong the life of the valves is now being used.

This Valve requires the use of a larger diameter one pump hose

Ozone pigtails for a 4-line kite. These replacement pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

Ozone replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

*Pro Tip - Don't forget to always check kite's pigtails for wear and tear.

Set includes two loop-loop pigtails and two loop - 3 knot pigtails.

Ozone replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

*Pro Tip - Don't forget to always check kite's pigtails for wear and tear.

Set includes two loop -  loop  pigtails.

Ozone replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

*Pro Tip - Don't forget to always check kite's pigtails for wear and tear.

Set includes two loop -  knot pigtails.

Ozone replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

*Pro Tip - Don't forget to always check kite's pigtails for wear and tear.

Set includes two loop - 3 knot pigtails.

The FixMyKite.com Slingshot Complete Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Slingshot has these on some 2015 and newer kites.

The Ozone Trimmer Bracket Stopper Ball is made from strong, durable and high quality plastic. This stopper ball is located at the connection point between the flag-out bungee line and the fly line right at the trimmer bracket.

Ozone replacement bridle line for any kite model. Please be sure to enter the kite year, model, size, and length of the replacement bridle in the fields above. The length measurement of your line from end-to-end including the loops at both ends. All replacement lines will be made with loops at both ends.

All line orders will be compared against the factory specs to make sure you are getting the correct line size for your kite.

The FixMyKite.com Cabrinha and Slingshot Screw Valve / Airlock 2 Screw Valve Base Only


This is only the valve Base that attaches to the bladder. You can save money by purchasing the valve base only and reusing the cap that is currently on your kite. Unless otherwise damaged, the valve caps generally do not go bad and can be reused with no issues. If you have any questions, please give us a call

Cabrinha adjustable pigtails for a 4-line kite. These pigtails attach to the end of your fly lines to connect to your kite. The pigtails can be adjusted by moving the knot on the pigtail to adjust the size of the loop. Always be sure to check you pigtails for wear and tear.

Airush replacement pigtails for the wingtip bridles. These pigtails connect to the bridle lines coming off the kite and are where you to hook up your outside flying lines. These work with newer Airush 4-line kites.

Set includes 2 pieces with:

• Color coded lines
  • 1 black loop-knot pigtail
  • 1 red loop-knot pigtail

The new PKS Ozone 3 Knot Pigtail set.

Includes:
2 - Loop-Loop pigtails with Pull Tab
2 - Loop-3 Knot Pigtails

PKS - Duotone Pigtails

Replacement pigtails for Duotone Kites. These pigtails connect to the bridle lines coming off the kite and are where you to hook up your outside flying lines. These work with Duotone 4-line kites.

Made with high strength 3mm Sheathed Dyneema for the ultimnate strength and wear resistance.

For 2017-2022 Duotone Kites

Length:
10 Inches

PKS North Pigtail Set
PKS Replacement North pigtail Set. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear. Made from 7/64" 100% Dyneema line.

Set Includes:

• 1 - Red Loop-Loop pigtail with pull tab
• 2 - Grey Loop-Knot pigtail
• 1 - Blue Loop-Loop pigtail with pull tab

PKS Reedin Pigtail Set
PKS Replacement Reedin pigtail Set. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear. Made from 7/64" 100% Dyneema line.

Set Includes:

• 1 - Red Loop-Loop pigtail with pull tab
• 2 - Grey Loop-Knot pigtail
• 1 - Blue Loop-Loop pigtail with pull tab

The FixMyKite.com Cabrinha Airlock 1 Screw Valve replaces 2013 and prior Cabrinha valves and is also compatible with 2008 Best EZ pump.   For later year Cabrinha screw valves, use the Airlock 2 Screw Valve

This REPLACEMENT BLADDER is Custom-made to be the right size for GoJoes, offering a replacement for your GoJoe if the bladder gets damaged.

The FixMyKite.com Cabrinha Airlock 2 Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Cabrinha started using these on 2014 kites, so they work on any 2014 and newer Cabrinha. The CAP will NOT WORK in the old Airlock 1 valve base (Cabrinha Airlock with old-style cap, pre-2014), but WILL WORK in 2014 and newer Cabrinha Airlock 2 valves. Also works on cloud kites by board riding maui. Made with TearAid to work with any bladder.

FixMyKite.com Cabrinha Sprint 90-degree One Pump Valve is the perfect replacement valve for Cabrinha Kites manufactured in 2007 and later.

The FixMyKite.com Cabrinha and Slingshot Screw Valve / Airlock 2 Screw Valve Base Only

This is only the valve Base that attaches to the bladder. You can save money by purchasing the valve base only and reusing the cap that is currently on your kite. Unless otherwise damaged, the valve caps generally do not go bad and can be reused with no issues. If you have any questions, please give us a call

OEM Replacement North Line Connector / pigtail Set. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear.

Includes 4 Pigtails, 2 Red, 2 Green.

Slingshot's 2010 and newer active stopper ball can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust it to suit the wind speed.

North 2021 Navigator Control System

Think less, feel more

Release and reload faster with the intuitive single-action reload Connect Quick-Release, and switch effortlessly between disciplines with the Toolless Interloop, our no-tools required modular harness loop replacement system. The Navigator Control System connects you intuitively to your kite, using premium leading technology Dyneema lines for precise performance. For 2021, we've widened the range with a new smaller bar size, and we've refined the ergonomic design even further for greater durability, increased tactile control and comfort. Sensing your kite's position just became second nature.

Sizes:

•  38-43cm
•  45-50cm
•  50-55cm

Includes:
Control Bar complete with Lines, Connect Quick Release, Standard Freeride Loop with Finger, Standard Leash, Repair Kit, 2 Spare LockGuard

Harness Loop Options:

•  Short Freeride Loop - Surf / Freeride
•  Standard Freeride Loop - All Terrain / Freeride / Freestyle (INCLUDED)
•  Long Freestyle Loop - Unhooked / Wakestyle
•  Slide Surf Loop - Surf / Foil

Features:

Premium 100% Dyneema SK99 flying lines

• Strong, thinner profile, pre-stretched flying lines mean less parasitic drag and uncompromised direct performance. With 88m of flying lines in the air, you can really feel the difference thinner line creates. Our latest technology high-load LIROS DC-401 Pro flying lines have extreme stretch resistance and minimal diameter (1.6mm).

Adjustable bar length options with NEW smaller bar size

• Fine tune the turning speed of your kite. The Navigator is available in three sizes 50-55cm (L), 45-50cm (M) and NEW bar size 38-43cm (S) - suited particularly to small freeride kites and freestylers. The small bar reduces kite sensitivity during handlepasses. To extend/retract bar length simply pull out cassettes on the bar-ends, rotate 180 degrees and snap back into place.

NEW grip with offset finger bar and colour-coded components

• Feel more connected. The Navigator is designed with a comfortable ergonomic grip for a natural grasp and the tactile offset finger bar is slightly oval, so you can feel when the control bar is orientated correctly. The colour-coded grip, leader tubing and line retainer pull tabs give a nod to our sailing heritage, port (red) and starboard (green).

Connect Quick-Release with intuitive single-action reload

• Fast, safe releases in a wide range of conditions. Our patented Connect Quick Release (QR) raises the bar in kite control system safety. The red QR handle has been ergonomically designed to fit in your hand comfortably for an industry-standard push away release. All loaded or running surfaces feature highly polished 316 stainless steel and low-friction components. The stretchy, larger diameter bungee inside the QR helps reduce accidental release.

Toolless Interloop System with LockGuard

• Switch effortlessly between disciplines - no tools required. Simply push, twist, pull, lock and go. Loops are made from optimised TPU material for flex and durability, with a more rigid freeride security finger to prevent unexpected unhooking. Flexible LockGuard safety ring prevents accidental release of your interloop.

NEW larger spinning leash attachment ring

• Our NEW oval-shaped leash pin ring has been elongated for easier fastening of the leash carabiner, and spins to help prevent your landing line from twisting.

Soft EVA bar ends with retractable line winders

• The positive buoyancy bar ends with integrated line winder bungees are injection moulded in one piece with no seams for long-lasting quality. The bar ends ensure nothing hard comes in touch with you or your board, float the entire bar, and also contain the concealed rear line adjustment. Even the best quality lines shrink over time, so after a month, we recommend you check your lines are all even and drop them to the bottom knot. It?s easy and takes only a minute to make the change.

Protective PU covered leader lines

• To help prevent line abrasion from uncovered lines against your skin, we've used colour-coded PU tubing covers. The covers also help them remain rigid and out of the way when the flying lines aren't under tension.

Adjustable cleated trim system

• Provides industry-proven line-adjustment when needed. The cleat base has been designed with NEW circular geometry for consistent bar spin, in other words, no jamming when you?re doing a barspin megaloop. In overpowered conditions the cleat allows you to shorten your front lines and adjust your body position.

Lightweight over-molded trim handle with Dyneema lines

• Easy to reach molded trim handle doesn't hurt when it hits you. Made from Nylon/EVA for strength with a textured soft-touch grip. Top quality German-made extremely high wear Dyneema depower and trim line with a special impregnation coating for resistance to abrasion.

Durable covered mainline, with customised TPU tubing

• Symmetrical multibore landing line channel allows the landing line/flying line to pass through without snagging, regardless of the orientation when deploying or reloading. Crafted from a patented material specifically formulated for high abrasion flexible applications.

Custom low-friction spinning handle

• Unspin your front lines easily.

Adjustable length flying lines 22m (12m + 10m)

• 22m lines have a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of flying line and 12m lines are ideal for schools to teach with and for foil racing. 8m and NEW 6m line extensions are available as an accessory for wave riding or tighter kiteloops.

Kook-proof flying line connectors

• Ensure you always set up your flying lines correctly. Designed to be exactly the same length so you can easily change the front (knotted end) and rear (lark's head loop) connectors to match most other manufacturers' kite configurations. Please familiarise yourself with the safety procedures and trimming instructions outlined in your kite?s user manual.

Premium Quick-Release Leash

• The Navigator Control System is supplied with a premium quality freeride Leash with a high load carabiner, soft neoprene cover and non-abrasive elasticised webbing. The NEW leash QR mechanism has been modified to ensure correct orientation is maintained when released for consistent, safe release and reload.

Navigator Connect Interloop (Harness Loop)

Our Toolless Interchangeable Harness Loops come in four sizes for different disciplines. The Navigator Control System comes complete with the 23cm Standard Freeride Loop, so we've packaged the other three interloops as one set. The set includes the Wave/Freeride Short Loop, which enables closer reach for smaller riders; the Freestyle/Unhooked/Wakestyle Long Loop for advanced riders only (no security finger) and the Slide Surf/Foil Loop for ultimate freedom (really excels in toeside riding) and use with rope harness.

What Kiteboarding.com Says:
The very easy-to-change-out loop system that North developed is awesome. This makes it easy to switch from a regular loop to a surf loop, even at the beach.

Standard Freeride Loop

• ALL TERRAIN / FREERIDE / FREESTYLE
• 23cm
• Our Toolless Harness Loops come in four sizes for different disciplines, and the Standard Freeride Loop (included with the Control System) is suitable for all-terrain, freeride and freestyle riding. Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary safety a LockGuard flexible safety ring with pull-tab secures the loop connection and prevents accidental release of your InterLoop. Constructed from optimised TPU material for flex and durability.

Short Freeride Loop

• SURF / FREERIDE
• 20cm
• Our Toolless InterLoops come in four sizes for different disciplines. The Short Freeride Loop enables closer reach for smaller riders. Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary safety a LockGuard flexible safety ring with pull-tab secures the loop connection and prevents accidental release of your InterLoop. Constructed from optimised TPU material for flex and durability.

Slide Surf Loop

• SURF / FOIL
• 20cm
• Our Toolless Harness Loops come in four sizes for different disciplines, and the Slide Surf Loop is recommended for kitesurfing and kitefoiling. Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary safety a LockGuard flexible safety ring with pull-tab secures the loop connection and prevents accidental release of your interLoop. Constructed from optimised TPU material for flex and durability.

Long Freestyle Loop

• UNHOOKED / WAKESTYLE
• 26cm
• Our Toolless Harness Loops come in four sizes for different disciplines and the Long Freestyle Loop is ideal for Freestyle, Unhooked and Wakestyle riding (for advanced riders only - no security finger). Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary safety a LockGuard flexible safety ring with pull-tab secures the loop connection and prevents accidental release of your InterLoop. Constructed from optimised TPU material for flex and durability.

Replacement for North Navigator Harness Loop Lock Guard Safety Ring with pull tab, set of 3.

Slingshot's active stopper ball for models older then 2009 can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust the bar throw to suit the wind speed.

2021/22 Duotone Click Bar Quad Control

The Duotone Click Bar revolutionised how we control our kites, taking things to a completely new level! The next step in this evolution is the introduction of FLITE99 lines by Robline! The Click Bar is available in a narrow version, just 42cm wide with a line length of 20m plus 2m extensions, or there is the Click Bar M, offering 22m line length plus 2 m extensions (width 49cm)! Four different chicken loop options are also available to ensure maximum performance and customization.

Features:

•  Flite99 lines by Robline - The latest line innovation, the best mix of performance, durability and safety.
•  Adjustable line length and v-position - You can change the v-position on the front lines depending on your  preference and riding style.
•  Compatible with most kites on the market - Should be used on all duotone kites and is compatible with most kites on the market (check with your local dealer).

The game-changing Click Bar is now even better in combination with the new FLITE99 lines by Robline. The Click Bar's unique Trim Unit enables you to power and depower in precise steps at the flick of a switch. To power your kite, turn the winder clockwise, this shortens the length of your backlines with every half turn. To depower, simply push the button in the middle of the winder and your backlines will lengthen again with every click. The power / depower level is always visible on the bar's power display and on a neon orange mark above the right floater. The Click Bar is equipped with the Iron Heart V, ensuring a quick and reliable safety release. All lines, including the guided safety line, are automatically untwisted during rotations. Supplied with a 4-line setup and adjustable to either 20m and 22m or to 22 m and 24 m line length.

Details:

• Automatic untwisting safety system - Lines are automatically untwisted during rotations. Even the guided safety line is untwisted, offering optimum safety and comfort.
• Iron heart IV - The click bar is equipped with the iron heart iv, ensuring a quick and reliable safety release. All lines, including the guided safety line, are automatically untwisted during rotations.
• 4 or 5-line setup - You can choose the best setup, depending on your personal preference and riding style. The 5th line makes relaunch easier, especially for big kites and in low winds.
• The winder - Twisting the winder of the trim unit clockwise, shortens the back lines, visible at the neon orange mark in the power display of the bar and the neon orange mark on the floater. The kite has more power. The power steps are divided in eight steps, half a rotation on the winder is one power step.
• Duotone flite99 by Robline - Kite lines connect and communicate the power in your kite, into your hands. Putting our lives in our lines, they are crucial for safe, long lasting and enjoyable sessions. Flite99 is offering the highest dyneema quality, sk 99. Backlines are turquoise / frontlines are grey, to always know which is which. They come with 12% higher breaking load and 15% less elongation than in previous years. The flite99 lines have a 6.5 % less wind exposed area, due to a decreased diameter, are faster! Additionally flite99 comes with a new, even more durable coating. Last, but not least, flite99 uses monofil, a unique material that prevents bending, kinking of the line, prevents the line from wearing out and worst case ripping apart!

Click Bar vs Trust Bar:

Iron Heart

• The Duotone Click Bar is equipped with the Iron Heart 5, which automatically ?swivels? the kite?s power lines. This is particularly beneficial after jumps with rotations. With the Duotone Trust Bar these lines have to be adjusted by hand while riding.

line lengths

• The Duotone Click Bar is available with a line length of 20/22 metres and 22/24 metres. This lets you adjust the length of the line as desired. The V-position can also be altered to adapt the bar perfectly for your kite. The Duotone Trust Bar is available with line lengths of 19m, 22m, 24m and 27m.

Depowering

• Thanks to the unique depower system on the Duotone Click Bar, you no longer need to adjust your body position when you want to power or depower your kite. This is particularly beneficial for smaller riders with shorter arms. It also removes the need for all the annoying lines required for traditional depower systems.

Bar widths

• The Duotone Click Bar is available in two sizes, with a bar width of 42cm or 49cm. The Duotone Trust Bar is also available in two widths, but has a flip-flop function on the floaters for adjusting the bar width. This permits possible bar widths of 42cm/49cm and 46cm/53cm.

Stopper

• The Duotone Click Bar is equipped with a sliding stopper. Above a certain pressure, it slides upwards thus providing the very highest level of safety. The Click Bar?s stopper can also be fixed using a grub screw so that it no longer slides (not recommended). The stopper on the Duotone Trust Bar can be used as a fixed stopper, which opens up new possibilities for board-off tricks.

5th Line

• Both the Duotone Click Bar and the Duotone Trust Bar come by default as a 4 line bar and can be extended with a 5th line. The Click Bar S can also be upgraded with the Hadlow line setup.

2021 Duotone Chicken Loop and Leash Kit

The Freeride Kit comprises of the smallest chicken loop combined with a short leash.  This kit is the first choice for freeriders who are not unhooking. The short chicken loop maximizes the depower range while the shorter saftey leash is tangle-free. Easily installed with one pin.

Freestyle Kit: The Freestyle Kit comes with a large chicken loop and a long leash. This setup is ideal for unhooked freestyle and wakestyle riding. Easy to hook back in following unhooked tricks, the long neoprene covered leash gives maximum freedom to move, comfort and prevents injuries. Easily installed with one pin.

Rope Harness Kit:  The Rope Harness Kit presents a small chicken loop with a metal plate and a short leash, which can ONLY be used with a rope harness. You must not use this loop on a standard harness hook. The short chicken loop ensures maximum range of depower and it's non-abrasive quality, means a longer lasting harness rope and loop. A short tangle-fee safety leash provides confidence and comfort. It's designed without any disturbing chicken dig. Easily installed with one pin.

Wakestyle Kit: The Wakestyle Kit comes with a huge chicken loop and a long leash. This setup is ideal for unhooked freestyle and wakestyle riding. Easy to hook back in following unhooked tricks, the long neoprene covered leash gives maximum freedom to move, comfort and prevents injuries.

*DOES NOT INCLUDE IRON HEART

2021 Duotone Chicken Loop Replacement Loop Only

Options/Sizes:

• Freeride/Small - 126.5cm
• Freestyle/Large - 24cm
• Surf/Slider

*DOES NOT INCLUDE LOCK TUBE

FixMyKite.com CrazyFly One Pump Kiteboarding Valve replaces valves on all CrazyFly kite models 2015 and newer.  Also a compatible replacement for North Lazy pump Gen. 2, Ozone, Slingshot, and Flexifoil.

Replacement Ozone Speed System Pulley Lines. This is the the 4 lines that the pulley run one, including two pulleys. Works with all Ozone depowerable foils 2009+

Duotone Item No. 44900-8194

V Distributor II for Click Bar (SS18-22)

Compatibalility:
2018-2022 Duotone / North Click Bar

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap.