Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
The Ozone Big Boston Inflate/deflate kiteboarding Valve will replace the inflate/deflate on 2011 and newer Ozone Kite. This valve is also a compatable replacement for the Max Flow Valve from Liquid Force Kite (2011 and later) and All Switch kites.
Ozone pigtails for a 4-line kite. These replacement pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.
The Ozone 90-Degree One Pump valve is the original factory valve for 2014 and newer Ozone kites with a one-pump system. Low-profile shape will also retro-fit onto any 2007-2013 Ozone kite with a one-pump system. This valve is also a compatible replacement for Slingshot, 2013 Crazyfly, Star, Flexifoil, Mutiny, and Ben Wilson kites.
All new High Volume valve for 2021. A higher volume valve with a and more stable material to prolong the life of the valves is now being used.
This Valve requires the use of a larger diameter one pump hose
Ozone replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.
*Pro Tip - Don't forget to always check kite's pigtails for wear and tear.
Set includes two loop-loop pigtails and two loop - 3 knot pigtails.
Set includes two loop - loop pigtails.
Set includes two loop - knot pigtails.
Set includes two loop - 3 knot pigtails.
The Ozone Trimmer Bracket Stopper Ball is made from strong, durable and high quality plastic. This stopper ball is located at the connection point between the flag-out bungee line and the fly line right at the trimmer bracket.
Ozone replacement bridle line for any kite model. Please be sure to enter the kite year, model, size, and length of the replacement bridle in the fields above. The length measurement of your line from end-to-end including the loops at both ends. All replacement lines will be made with loops at both ends.
All line orders will be compared against the factory specs to make sure you are getting the correct line size for your kite.
The new PKS Ozone 3 Knot Pigtail set. Includes: 2 - Loop-Loop pigtails with Pull Tab 2 - Loop-3 Knot Pigtails
Replacement Ozone Speed System Pulley Lines. This is the the 4 lines that the pulley run one, including two pulleys. Works with all Ozone depowerable foils 2009+
The Ozone Speed System is the interface between the fly lines and the bridle of the kite. This speed system works on all Ozone depowerable foil kites since 2009 including the Access, Frenzy, Manta, Summit, Blizzard, Subzero, Chrono, R1 V1, and Hyperlink. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span. The Speed System is a double-pulley layout using high-spec, low-friction Ronstan Orbit Block pulleys.
The Ozone Speed System V4. This Speed System comes stock on the Chrono V3, Hyperlink V1, Blizzard/Sub Zero V1.
The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap.
Replacement 2011+ Ozone Boston Inflate/Deflate Valve Red Cap for Ozone's Boston valve.
Ozone Bar Floats, they work as replacements on the older Ozone Contact Water, Snow, and Race bars, or use them for building your own custom bars.
OEM Silicone One-Pump Hose is a heavy-duty flexible hose with a 1/4" inner diameter, standard factory one-pump hose. This means it will not just be the only replacement hose you will ever want to use, it will last!
Hose is sold by the foot so you can cut it to your specific needs. For more than one foot, just up the quantity when ordering. hose will be sent in 1 continous length of hose.This hose is the standard size for most valves on the market including Advance, Best, BWS, Cabrinha, Core, Crazyfly, EH, F-One, Flexifoil, Flysurfer, Liquid Force, Nobile, North, Ozone, Ocean Rodeo, RRD, Slingshot, Spleene, Star, Switch, Takoon, Vari, Wainman, and possibly Zian
The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap. It is simple and incredibly easy to use.
The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 2014+ kite models that have the push away release Megatron II flag out system.
The Ozone Contact Bar Flag Out Bungee for Contact V4 Foil And Water Contact Bar
The Ozone Contact Bar Flag Out Bungee for Race and Foil Race V4 Bar
Spare Flag out line 2013 (plastic bar ends, PUSH Megatron chicken loop) V1 (soft bar ends, PUSH Megatron chicken loop) 995mm (1320mm stretched).
The Ozone Contact Bar Flag Out Bungee line for Wake and Compact V4 Bar
The Ozone Chickenloop Trim Line is the replacement line that runs from the top of the cleat depower system, up through the trimmer bracket, and down through the front side of the cleat. This line can be used on the Ozone Contact Water and Foil Freeride Control Bars V4/V5 Click-In Loop.
The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 20011-2013 kite models that have the pull release Megatron flag out system.
The Racer-Back Clamcleat is the most trusted cleat in Kiteboarding and used by many top brands such as Ozone. A lightweight and compact cleat on a rope. Easy to rig and adjust by hand. Amsteel/Chickenloop line can be woven through the back of cleat to secure it in place while the front side with the teeth is used as a depower cleat. The position of the cleat on the line can be adjusted by hand. No tools required. Standard:
Micro:
Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.
The Ozone Foil Stall/Brake handle attaches to the 2015+ Contact Water and Contact Race Control bars to convert the bar to Foil Freeride and Foil Race bars. The brake strap attaches around the relaunch balls with a bungee to the steering leader lines. These stall handles come standard on all Ozone snowkites/foils.
Ozone line extensions are made to be used with all Ozone water kites and the Ozone Contact Water, C4, or Race Control Bars. Adding extensions to your lines can give your kite that extra height to find some cleaner wind and also give you a bit more power for those lighter days.
Ozone Race v2 Fly Line Extensions (2 x 300 kg & 2 x 200 kg) Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even-length lines are compatible with any Ozone Contact Water Freeride, Race bar, and many other bars on the market.
The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.
These extensions are made from Ozone race lines which are made from the highest quality, pre-stretched Dyneema available.
Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.
All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory Features:
Ozone Ignition Trainer line sets made to be used with the Ozone Ignition 3-line trainer kite. These lines also perfect as replacement lines for any 3-line kite or trainer.
The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.
The Ozone leash makes passing over your head and around your back even easier. Ozone quality with super strong webbing, bungee covered with extra soft neoprene, and a snap shackle for easy hooking in and out. This leash can handle anything you throw at it and is built for safety with a push away top hat quick release.
This big Boston valve (screw valve) pump adapter / nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), Naish, Crazyfly, Airush (2015 and newer,) and Switch kites.
This threaded big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer), and Switch kites. This adapter screws onto the top of the Boston valve for a more secure fit compared to the friction-fit adapters typically found on most pumps.
The Connect Wing harness The Connect Wing Harness V1 makes riding longer distances a real pleasure, giving you time to relax your arms and maximise your session. The slim-line lightweight design offers ultimate freedom of movement when unhooked with support to hook in, lean back and cruise when you want. The Connect Wing harness has been designed to comfortably slide on skin and neoprene. It can easily be rotated around your waist when lying on a board to paddle, keeping the hook away from the board and avoiding damage. An open angle Spreader Bar hook allows easy hooking in and out. The wings Leash Line can be connected directly to the harness with or without our optional Quick Release, in this case the Wrist Strap or Waist Strap is not required. We highly recommend using the Quick Release if connecting the Leash Line directly to the harness.
Ozone Wing Waist Strap and Wing Leash Line
Complete Ozone Waist Leash for Ozone WASP or any other wing.
Replacement Ozone WASP V2 Leash Line. Does not include waist or wrist strap. Includes swivel to prevent tangles. Can be used on most wings
Sizes:
Harness line for WASP V2. Wing foiling harness line to help relieve stress on your arms, improve posture and upwind angles. The Ozone harness line is adjustable using the knot system at the end of the rope to adapt to your reach.
Ozone Wing Leash Quick Release. Does not include waist strap, wrist strap, or leash line. Includes the Quick Release only.
Ozone WASP Wrist Strap (strap only, no leash line)
Replacement Wrist Strap for use with the Ozone WASP, does not include the leash line.
Ozone Wing Waist Strap (strap only, no leash line)
Replacement Waist Strap for use with the Ozone WASP or any other wing, does not include the leash line.
OEM Ozone High Volume One Pump Hose
Hose is sold by the foot so you can cut it to your specific needs. For more than one foot, just up the quantity when ordering. hose will be sent in 1 continous length of hose. This hose works on the Ozone High Volume valves as well as Airush SPS valves (2008 and newer) and Gaastra valves.
Ozone 2 Mega Valve Replacement Kit
Theis is a 2 valve kite thatincludes one pump hose, hose clip and hose collars for replacing the leading adge and the strut valve on an older Ozone kite with the previous generation kite valves.
Includes:
1 - 90 Degree Mega One Pump Valve
1 - Straight Mega One Pump Valve
1 - Hose Clip
2 - Hose clip retainer collars
1 - 9 inch Length of One pump hose
« Previous | 1 | 2 | 3 | Next »
Forgot your password?
Already Registered?
OR
