Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
PKS Trainer Kite Lines fly above the rest. PKS trainer lines are 200 lbs. white lines for high-visibility, and made from Pre-stretched Spectra to several lengths to fit your Custom needs. Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there.
The PKS MINI Slider-Release Leash is fully releasable under load, and has removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. MINI length = 22 inches (55cm)
The PKS Slider Handle Pass Leash is fully releasable under load by pushing the soft foam handle, and have removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. Length = 46 inches (115cm)
The PKS EZ Leash Connect is the perfect product to put your leash attachment where you want it on your harness. Simply larkshead this to the spreader bar, leash ring, or back of the harness to create a quick accessible leash connection point.
Dacron Tape should be used to repair all cuts in the leading edge and stuts of a inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
The PKS Pro Flow V3 kite pump is the next ingredient for your successful kite session. Our tweaked version of the newest and best pump on the market is constructed with high quality components and measures 20" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.3 liters of air per pump. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time.With high grade shaft and piston seals, the v3 PKS Pro Flow Pump will outlast any other pump on the market. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
This newly engineered pump features a PSI gauge integrated into the handle, foam air filter to catch sand, new premium extra-durable and flexible hose, pump adapters for standard 9mm inflate as well as larger boston screw valves, ergonomic handgrips and foot base, and kite tether.
The latest and greatest PKS Pro Flow V3 MEGA kite pump is the next ingredient for your successful kite session. Our tweaked and upgraded version of the newest and best pump on the market is constructed with high quality components and measures 24" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.9 liters of air per pump. The taller pump is great for taller people or getting more air per stroke than other pumps. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
The PKS Universal Pump Adapter/ Nozzle - Set fits on standard kite pump hoses with a bayonet connection. The set includes an adapter for compatibility with pretty much any kite out there.
The New PKS Universal V2 Valve adapter for Naish, Flysurfer, F-One, Core kites. Works with Reactor Valve, Speed 2.0 Valve, Free Flow Valve and Surelock Valves.
Bayonet Hose Fitting
This is replacement Bayonet fitting that is on the outlet side of the Hose where you connect an adapter or directly to kites. The fitting is a compression fitting that needs to be glued in place with something like Aquaseal or Seam grip to ensure it stays in place and maintains an air tight connection.
The Cabrinha Airlock 1 Screw Valve adapter: compatible with 2013 and prior Cabrinha kites (and 2008 Best EZ screw valves)
The North and Core Pump Adapter/Nozzle is compatible with Core kites and newer North kites (2013 and on), Duotone kites, and Cabrinha Airlock 2 kites.
The 7mm and 9mm Pump Adapter is compatible with almost all kites prior to about 2008. Nearly all older kites which include the 2 valve inflate and deflate systems included 9mm or 7mm valves. This is also the adapter used for inflating struts on kites without a one-pump system.
Replacement Shaft and Piston seals for PKS Pro Flow pumps or any HP1 / HP3 pump. Use these replacement seals to make your pump act like it is brand new again.
With only a few exceptions, the PKS HD Premium Pump Hose will fit most any Kite/SUP pump out there (new and old) and is heavy-duty, flexible, and kink-resistant. The MALE end of the hose attaches to the pump while the FEMALE end attaches pump adapters/nozzles.
Before now, hoses have not been sold separately. Manufacturers would rather sell complete new pumps rather than a replacement hose. Most kite pump hoses are not super-duty and crimp, kink, or crack over time, but now you can replace them easily and at a fantastic price. This is the same hose on the PKS Pro Flow V2 AND v3 Kite Pump.
The PKS HD Replacement Pump Hose will fit on most kite brands* new and old pumps including Airush, Best, Blade, Cabrinha, Crazyfly, Epic, F-One, Flexifoil, Liquid Force, Naish, North, Ozone, Slingshot, Wainman, and more. *Note: This replacement hose will NOT fit on the old PKS PowerFlow Pump or the new WMFG.
Replacement silicone rings for PKS pump adapters. Sold individually
HP2 SUP Pump Replacement Seal Kit Replacement Shaft and Piston seals for PKS Pro Flow pumps or any GRi HP2 pump. Includes Piston and Shaft Seals Use these replacement seals to make your pump act like it is brand new again.
This Bravo 20 Electric Pump battery will replace the battery in a Bravo 20 or Bravo 20-1 pump. It's a 12 volt, 7-9 amp hour lead acid battery. To install the battery you will need to open up the pump by removing the screws in the bottom and back of the pump. Note: Please keep the battery charged when not in use to prolong battery life. The first charge may take as long as 12 hours to fully charge the battery. To store the pump for a long period of time without it being used, charge the battery to full and remove the fuse from the back of the pump.
This is a replacement Main and Control PCB, with cables. part SP Z052 for the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
This is a replacement Top Case / Cover with Gauge and Control PCB installed. part SP Z144 for the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
This is a replacement Piston Group / Compressor Unit part SP Z146 go the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
Dacron Tape should be used to repair all cuts in the leading edge and struts of an inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
The PKS Smart Wing Leash System includes the PKS Smart Cuff, a wrist cuff with multiple "locking" features to ensure the leash is not inadvertantly pulled off your wrist. The Elite Universal leah line with locking Larks Head Loops and the PKS Quick Connect Pigtail for quick and easy connections to any wing. PKS Smart Cuff Wrist Leash Cuff: The PKS Smart Cuff is a purpose built Wrist cuff for wingboarding that has two different "locking" features. The first is the Flat Lock low profile "tounge" that keeps the velcro closure flat and even help to prevent anything getting under it and opening the wrist leash. The second is The Over Lock perpindicular velcro closure that closes across the main velcro strap to prevent the wrist cuff strap from inadvertantly being opened.
PKS - Elite Universal Wing Leash: The PKS Wing Leash is made using heavy duty 3/16" Spectra hollow core line with high elasticity bungee line inside. The ends have 7/64th spectra line that has been wrapped and sewn in place creating a locking larks head for the ultimate strength, security, and versatility. By using the 7/64" spectra line for the loops, you are able to easily connect to multiple wing or harness connection types sush as hand shake, larks head, or ring connections. This combination gives you strength, versatility and ease of use. PKS Leash Quick Connect Pigtail With Stopper Ball: Designed to be used with Wing leashes for a quick connect and removal from one wing to another. No need to have a leash for every wing, just easily move your leash from wing to wing using the Quick Connect pigtail with stopper ball.
PKS Smart Cuff Wrist Leash Cuff:
The PKS Smart Cuff is a purpose built Wrist cuff for wingboarding that has two different "locking" features. The first is a low profile "tounge" that keeps the velcro closure flat and even help to prevent anything getting under it and opening the wrist leash. The second is an over lock velcro closure that closes across the main velcro strap to prevent the wrist cuff strap from inadvertantly being opened. Key Features:
The PKS Wing Leash is made using heavy duty 3/16" Spectra hollow core line with high elasticity bungee line inside. The ends have 7/64th spectra line that has been wrapped and sewn in place creating a locking larks head for the ultimate strength, security, and versatility. By using the 7/64" spectra line for the loops, you are able to easily connect to multiple wing or harness connection types sush as hand shake, larks head, or ring connections. This combination gives you strength, versatility and ease of use.
Designed to be used with Wing leashes for a quick connect and removal from one wing to another. No need to have a leash for every wing, just easily move your leash from wing to wing using the Quick Connect pigtail with stopper ball. The Quick Connect Pigtail set allows you to have a much larger stopper to ensure that the connection is sure to hold.
PKS Adjustable/Universal Wingboarding Harness line.
The PKS Adjustable Wingboarding Harness Line is adjustable for length and will attach to wings with handles as well as wings with a boom.
PKS Wingboarding Rigid Handle/Boom Harness Line Easy Connect
The PKS Wingboarding Harness Line Easy Connect Adapter is an adapter for attaching the Wingboard Harness Line to a boom or rigin Handle on your wing. Sizes:
Includes 1 Harness Line Easy Connect
PKS Wingboarding Harness Line Pigtail Adapter
The PKS Wingboarding Harness Line Pigtail Adapter is an adapter for attaching the Wingboard Harness Line to the handles or knots on your wing.
The PKS Adjustable Wingboarding Harness line is adjustable for length and will attach to wings with handles as well as wings with a boom.
PKS Double-sided Seaming Tape is ideal for Kite repairs, along edges that have to be closed, Leading Edges, Trailing edges, strut, etc., and is suitable on foil kites and Inflatable kites. Sold by the ROLL only, 1/4" (6mm) x 72 yards (65.8 meters).
PKS replacement hose clamps for kites with larger 3/8" ID one pump hose.
The PKS line winder will help you keep your lines nice and neat. Recyclable and ECO Friendly. Sturdy, Strong sand will last. Approximate Dimensions: Widest Pont - 25cm Winding Area - 18cm Height - 11cm
« Previous | 1 | 2 | Next »
Forgot your password?
Already Registered?
OR
