Fixmykite.com Microhook Line Splicing Kit$12.00
CART (0)
$0.00
Details
The kite repair kit by FixMyKite.com includes everything you need to do an emergency repair. This kit is essential for any kiteboard trip.
The FixMyKite.com 7mm Self-Stick Kiteboarding Valve is a replacement for leaky valves on kite bladders. Works with older kites (primarily produced before 2003 and prior) that use a smaller inflate valve. Also used on GK 1 pumps, and Ocean Rodeo kites midyear 2010 and earlier.
Always check pulleys for wear and tear and replace when needed. A broken or jamed pulley can ruin a kite bridle. $8.25 per pulley
NEW LOWER PRICETuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under any load then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available
Ripstop sail tape is the best way to repair cuts in the sail of your kite. This "peel and stick" Nylon tape will provide the strength needed to repair small cuts in your kite to get you back out on the water fast. *Can also be used on paragliders and sails.
The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap.
Crazyfly Quick-Release with Chickenloop is the stock part that comes with all 2018 Sick Bars. Though very similar looking to the 2014, the inner mechanics were changed to be easier to put back together once released. The built in swivel and smooth-release make this one of the cleanest and most simple systems on the market.
The Ozone Megatron Chickenloop comes standard on all Ozone snow and water kites from 2014+. This replacement chickenloop can be used to repair a current bar or used to retrofit an older bar with the new push-away system.
Pefect replacement for any Slingshot bar that uses the lock n' load chicken loop including 2007-2009 T2, T3, Rev1, Rev2, RPM, and Fuel kite models. This item includes chicken loop line and stainless steel ball bearing.
The PKS Self-Launch Sand Anchor is another true innovation in the world of kiteboarding and self reliance. This amazing Self-Launch Beach Anchor can be used to self-launch your kite with nothing around but sand.
<br /> <strong>The 2018 North Chicken Loop: Freeride kit</strong> comprises of the smallest chicken loop combined with a short leash. The short chicken loop maximizes the depower range and comes standard with a short safety leash.<br />
<br /> Freestyle Kit: The Freestyle Kit comes with a large chicken loop and a long leash. This setup is ideal for unhooked freestyle and wakestyle riding. Easy to hook back in following unhooked tricks, the long neoprene covered leash gives maximum freedom to move, comfort and prevents injuries. <br />
<br /> Rope Harness Kit: The Rope Harness Kit presents a small chicken loop with a metal plate and a short leash, which can ONLY be used with a rope harness. You must not use this loop on a standard harness hook. The short chicken loop ensures maximum range of depower and it's non-abrasive quality, means a longer lasting harness rope and loop.<br />
Cabrinha extensions. 4 line set of Factory Cabrinha line extensions. in custom lengths, you choose the length. 2 White Inside lines 2 Black Outside lines
Kitemares happen, and when they do, FixMyKite is there for you, The Shirt is designed and printed in the USA.
<p><br /> Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.</p>
Australia water shades are surf polarized sunglasses designed by Ocean for the water lovers. Ocean has developed these surf polarized sunglasses focusing on the most extreme conditions. They have ATOM system polarized lenses which reduce the harmful effects of the suns rays reflecting on the water. The glasses do float thanks to the frames. Additional float included for added protection. <br />
<p>Designed to offer style and functionality. The CUMBUCO by OCEAN Sunglasses has everything that any water sports lover would wish for; Polarized lens with ATOM system which provides safety. Coating-water repellent and Anti-impact protection. Features a polycarbonate material for a light yet durable product.</p>
<strong>SeaSpecs</strong> Non-elastic, Easily Adjustable and Comfortable Secure Strap keeps <strong>SeaSpecs</strong> on your head during your Extreme Surfing, Kite Surfing, Windsurfing, Jet Skiing, Snowboarding and all other Extreme Sports!
This soft zipper case adds extra protection and padding when storing your water shades. It features a hook on one end, as well as two loops on the back, allowing you to attach it to different objects in various ways.
Ocean Shades Protective Hard Case keeps you glasses clean and scratch free!
Ocean Shades Soft Pouch keeps you glasses clean, scratch free, and doubles as a cleaning cloth.
<p>One of the most popular water wear accesories are these awesome water jerseys. The Kiteboarding.com Water Jersey keeps you going during the longest sessions.</p>
Crazyfly T-Shirt. The Shirt is designed and printed in the USA.
<p>Made from a quick-dry fabric, the<strong> ION Wetshirt </strong>protects against UV rays and shields sensitive skin from the harsh elements. Loose fit style with Raglan Sleeves and 100% Polyester.</p>
<p>The PKS Compression bag is large enough to fit most kites including 17 meters. Like the Dakine compression bag this bag weighs less than the standard kite backpack to provide protection for you kite travel while reducing weight.</p>
<p>The Dakine compression kite bags are a must have for travel. Replace your heavy kite bags with this light weight compression bag. You won't believe how much weight and space you can save.</p>
<p>The Ozone Performance Foil Compressor Bag keeps the leading edge plastic profile battens concertinaed in the same way we pack the kites in our factory and the same way paragliders are packed. We highly recommend using it as this protects the kite and the leading edge battens from potential deformation.</p>
Ozone kite compression strap. Comes standard with all water and snow kites and this spare strap works great to keep your kite neat and folded.<br />
This Sand Weight Bag is kiter's essential item. You can use the sand weight bag to stop your kite from blowing away on a windy day, reduce sail fluttering which reduces wear on your kite, and also use for self launching. Every kiter could use one or two of these.
The HitchSafe makes any kiteboarders or surfers life easier. Figuring out what to do with the keys before going surfing or kiteboarding can be a big pain but we finally found a good, affordable solution that only takes a couple minutes to install.
The Hitchsafe replacement cover is made to look like any normal hitch cover, but covers the Hitchsafe stored in the hitch of your truck including your keys and valuables.
The KeyGuard Pro Key Safe is the professional’s choice because it offers a product that addresses professional’s demands. The KeyGuard Pro Key Box offers unique features such as the keypad and optional locking shackle. Along with this, is the large storage area which holds keys and cards. These features and others are offered at a price lower than leading competitive lockboxes.
The Hitchsafe Extender Pins are for 2005-current Toyota Tacoma and the 2007-current Tundra OEM hitch receivers.
Standard line extensions in all white. Choose your length.
Race line extensions for when you need just a little more The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.
The Ocean Rodeo Go-Joe is everything you need for Leashless board Retrieval assistance: Even stronger, better, lighter, and easier to use than before. A great idea and an innovative product that is moving from beginners to wave riders and mainstream users. If you don't have one it's worth to check it out.
The Oceanus Eel Reel Leash...if you're gonna use a board leash...this is the only choice!
The retractable Oceanus EEL Quick-Release Leash is the latest and most versatile model of reel leash. This Quick Release version allows you to take it off your harness easily and leave it connected to your board.
The Oceanus SUP Flat Water REEL Ankle Mount Leash provides a low-profile, straight-line feed from the ankle to the board leash plug. This model may be worn on the ankle, waist belt, or personal floatation device and the leash extends to clip onto the board leash plug.
The Oceanus SUP Board Mount Reel Leash can be attached to the stand up paddle board while you wear the comfortable ankle cuff.
The Oceanus Replacement Leash is a Nylon leash with straps stitched at both ends and rated at 460 pounds. This leash is a replacement for the reel part of the leash that fits inside the plastic housing.
The Oceanus Reel Leash Rope extension is approximately 30 inches long, 1/4 inch diameter rope doubled over, stitched, glued, and rubberized. This rope extension goes between the webbing attachment on the board and the spring-loaded hook of the reel leash.
The Oceanus Shock Cord is an alternate attachment to the standard rope extension, and comes with a webbing attachment. The webbing attachment affixes to your board fin-screw area, then you can attach either the standard rope extension or the shock cord. The Shock Cord is shorter and has elastic bungee.
The Oceanus Snap hook replacement is available in case yours wears out. These solid Stainless Steel trigger snap clips are rated at 270 pounds of load, have a bottom swivel, and spring "trigger" snap close.
The Oceanus Webbing Attachment is the part that attaches to the fin box or fin screws of the board. The Oceanus Reel Leashes come with this part, but if yours is looking worn out, it may be time to replace it.
The Velocity is our most efficient performance freeride/ race kite. The Velocity's ultra high performance comes from a combination of its high aspect outline, flatter arc, and high performance profiles.
The 2017 CrazyFly Sculp is a versatile all-around performer, suitable for a wide range of riders and styles. It delivers consistency in all riding disciplines and offers incredible wind range and ease of use.
The Ozone R1 is the peak of race and foil kite performance. The R1 will have you riding faster and pointing further upwind than any kite out there. New air intakes on the leading edge allow for quicker inflation and a solid, closed-cell foil.
The Skywatch Xplorer 1 windmeter is a extremely accurate way to measure the wind and know exactly what size kite to rig up. Small and compact, the Xplorer 1 is one of the easiest ways to know what the wind is doing before you hit the water.
These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 4mm, and the maximum rope size is 5/32 inches.
Replacment trim/depower rope for sentinel bar system.
Ozone replacement bridle line for any kite model. Please be sure to enter the kite year, model, size, and length of the replacement bridle in the fields above. The length measurement of your line from end-to-end including the loops at both ends. All replacement lines will be made with loops at both ends.
All line orders will be compared against the factory specs to make sure you are getting the correct line size for your kite.
The New 2017 Dakine Push Button Hammerhead Spreader Bar is a kite-specific hammerhead hook and all new push button easy connect and disconnect. Features a built in crossbar for hold down webbing strap, freedom shape spreader bar pad for comfort. Complete with hook knife, already assembled and ready to put on your harness.
The New 2017 Dakine Option Dyneema Rope is the replacement webbing for the Option Spreader bar. Adjustable double Dyneema rope sliders offer strength while the webbing tab makes for easy assembly.
Sentinel Top swivel cover, plastic w/overmold rubber
The 2018 North Clickbar is the best kite control system in the industry and it just got better. Now with three different chicken loop options available, you can have maximum performance and customization.
There's a new quick release system on the market aimed at keeping it as simple as possible: the PKS KISS Loop. Jeff Howard is always working on new things and his most recent project is designing the most simple quick release the kite industry has seen. It's recommended for experienced kiters who want to build the most minimal and easy to use bar setup for foiling and light wind use.
The 2018 North Trust Control Bar is now available with a 5th element upgrade kit. 1 bar with the ability to fly both 4-line and 5-line kites. In just 3 minutes you can convert your 2018 Quad Trust bar to a 5th element.
Cabrinha 5 Meter extensions. 4 line set of Factory Cabrinha line extensions.? 2 White Inside lines 2 Black Outside lines
The perfect pocket tool for emergency repairs and adjustments. The Fidget Tool has all the most common bits you'll need for field adjustments, including removable surfboard fins. And it has a built-in keychain ring, so you can keep it right at your side any time you leave home.
ION KITE KNIFE 2.0 MULTITOOL
The ideal tool to have on you at all times on the water. Fits into your harness knife pocket (all ION harness have them). The tool is a safety line knife but has a posi star drive head for tightening screws on the boards & straps & a hex fin key.
CORE SENSOR 2S Unibody 4-Line Bar with S-System Your session?s awesomeness depends heavily on your gear. We believe the Sensor 2 control bar system contributes much more than you would think to kite performance. And it?s what you don?t see that makes our bars so unbelievably good. The functional know-how we hide inside and the minimalist design on the outside gives our bars the signature CORE confidence you expect. And the safety features you rely on. The Sensor 2 bar is now joined by the new Sensor 2S and Sensor 2S Pro. Two new bars with more tech wizardry that you can?t even see at first glance. Regardless of your bar selection, The CORE Sensor 2 bar system will provide you with the lightest, safest, and most direct feeling bar on the market. Because we sell more than just cool bars. We sell confidence. Meet the new Sensor 2S. An intelligent mid-cycle update to the exceptional Sensor 2. A bar, where engineering ingenuity meets minimalism; where ceramic bearings are used to eliminate friction in the auto untwist function; and where Tectanium is used to make the thinnest and most aerodynamic depower lines. Technical innovations that make the Sensor 2S bar system peerless. Sometimes, it's what you don?t see, that makes it so good. Still not good enough for you? Then, you are ready for the new Sensor 2S Pro.
Your session's awesomeness depends heavily on your gear. We believe the Sensor 2 control bar system contributes much more than you would think to kite performance. And it's what you don't see that makes our bars so unbelievably good. The functional know-how we hide inside and the minimalist design on the outside gives our bars the signature CORE confidence you expect. And the safety features you rely on. The Sensor 2 bar is now joined by the new Sensor 2S and Sensor 2S Pro. Two new bars with more tech wizardry that you can't even see at first glance. Regardless of your bar selection, The CORE Sensor 2 bar system will provide you with the lightest, safest, and most direct feeling bar on the market. Because we sell more than just cool bars. We sell confidence. Meet the new Sensor 2S Pro bar. The only, titanium trussed, carbon fiber control bar. A bar that exhausts superlatives. A bar we are very proud of. We leveraged our experience in carbon fiber board building to build a 100% carbon fiber, thin grip, unibody bar reinforced with a titanium alloy truss. Although it shares many of the same features as our sensational Sensor 2S bar, it is profoundly different in that it features a full carbon fiber bar and 100% Tectanium lines, top to bottom. Go Sensor 2S Pro.
Nasih 20m 4 line, line set. Standard Naish lines, Red, Blue Grey Grey.
Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.
Ozone trimmer handle for V4 or older
The 2015 QuickLoop 1X control system was a carry over bar for 2016 - light weight, fixed length control bar featuring our all new QuickLoop. QuickLoop is an opening harness loop connection designed to work specifically with our 1X single line flagging security system.
Effective and straightforward, the 2019 Naish Base Control System features a stainless steel line organizer with a simplified V-design for easy release and reload. It also features a reduced-diameter bar with a high texture embossed grip. The Bar Adjuster allows riders to modify lines from 18" to 20" (45-51 cm) to seamlessly fine-tune steering.
The 2019 Naish Torque ATB 55 is a 4-line control system with an above-the-bar Clamcleat trim that is easily adjustable in height. Ideal for a wide variety of freeride, freestyle and wave riding, this bar is equipped with the most advanced trim loop mechanism to date. Engineered for consistent, hassle-free operation, the quick release features a linear release force for easy release and reload regardless of the tension on the line.
Designed specifically for smaller riders, this Torque compact bar puts things in proportion. The Torque BTB 50 comes standard with 20 m lines and 4 m extensions giving users the option to get quicker response or more power from their kites. With perhaps the most advanced below-the-bar trim loop mechanism to date, this 4-line system features a below-the-bar swivel for effortless untangling of lines, forgiving steering and extremely easy release and reload, keeping you comfortable and secure whether freeride, freestyle or wave riding.
Featuring the most advanced quick release trim loop mechanism to date, this function-rich design offers extremely easy release and reload and a below-the-bar swivel for effortless untangling of lines. Whether freeride, freestyle or wave riding, the Torque BTB keeps you secure for a seamless riding experience.
Black multi-bore PU tubing with top funnel, 4mm Dynema mainline, split top Spinning Handle. For 2017 or newer
2019 Mystic Kite Safety Leash - Short
2019 Mystic Kite Safety Leash - Long
Length = 43 inches (110cm)
The simple and easy to use Push-Away Release Leash from Airush. Lark's Head it to your harness, connect the snap shackle to your kite, and ride, simple as that. If you need it, just push away and you're safe.
Extra short is extra safe. The short safety leash comes standard with all CORE bar systems. When connected to your spreader bar, our short, 50cm long, leash delivers better ergonomics and safety. It is easier to see or grab and it won’t tangle like longer leashes might. If you do not see unhooked freestyle in your future, then protect yourself with a short leash.
The deluxe Carabiner Clip is ideal for extensive multiple functions and uses, as they are made to easily larks headed on any loop. Length 2.25"
The Carabiner Clip is ideal for extensive multiple functions and uses, as they are made to easily change out on different material without the need to restitch or sew material into a closed loop. There is no closed loop on this clip for that purpose.
The PKS Replacement Ozone Speed System is the interface between the fly lines and the bridle of the kite. This speed system works on all Ozone depowerable foil kites since 2009 including the Access, Frenzy, Manta, Summit, Blizzard, Subzero, Chrono, R1 , and Hyperlink. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span.
With the PKS Replacment Speed System, you get the option to order Lines only or complete with the pullies.
The Ozone Contact Bar Flag Out Ring Cone..
Mystic Stealth Bar Kite and Stealth Bar Surf
Mystic Adaptive Leash Eye Perfect for adding a leash connection point to any harness.
The New PKS Universal V2 Valve adapter for Naish, Flysurfer, F-One, Core kites. Works with Reactor Valve, Speed 2.0 Valve, Free Flow Valve and Surelock Valves.
This is the Wizardhat hardware only set. If you just need some extra hardware This hardware set will work with any base plate or 4-bolt tracked board on the market. This included M8 or M6 base plates and tracks. There is no more need for T-nuts or different sized bolts the Wizardhat will work on any. Also, the way the bolt sticks up through the track on top makes it easy to line up with the base plate. The Wizardhat hardware only set comes with 4 qty Wizardhat hardware (includes cone nut, t-bolt, and t-slider with a decal. *Be careful not to over- tighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.
Cabrinha Flagout Swivel
Riley Kite Pulley
- 130cm length (unstretched) - Soft touch, lightweight material - Double lock carabiner with swivel (1100kg) - Mystic 2.0 compact quick release - Neoprene carabiner cover - Designed for advanced unhooked / freestyle performance - Developed with Ruben Lenten
Naish pigtails made of spectra and color coordinated.
<br /> The Dakine Indo Hat is a quick-drying hat designed for the ultimate waterman. Keeps your head cool and the sun off your face. Comfortable chinstrap keeps the hat secured to your face while riding hard and jumping high.<br />
This kit is an absolute no brainer to have in your bag. There is no excuse not to have this kit, because it has all the essentials in standard kite repair. Eliminate excuses and stay on the water with this fix kit.
The Dakine Kahu Surf Hat is a quick-drying hat designed for the ultimate waterman. Keeps your head cool and the sun off your face. Comfortable a removable chinstrap keeps the hat secured to your face while riding hard and jumping high.
Sizes: S/M or L/XL
<p>The Dakine No Zone Hat is a great solution to keep the sun from beating down on you all day. This comfortable hat cinches right up to your chin so it won't fall off, and keeps the sun off your head, face, and neck.</p>
The Essential Water Sport Accessory Buoy Wear, patent pending, floating hat technology... Never sacrifice a hat to the water gods again
The Dakine Surf Trucker Hat is a quick-drying hat designed for the ultimate waterman. Keeps your head cool and the sun off your face. Comfortable chinstrap keeps the hat secured to your head while riding hard and jumping high.<br />
The 9mm Self-Stick-Valve is a very common inflate valve used for years. this one way valve can be easily converted into a 2 way valve if desired.
The Ronstan Orbit Block kite pulley just hit the market. For anyone tired of going through pulleys and the danger of failing pulleys, this is the ticket.
NEW LOWER PRICE! Tuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available.
The Fixmykite.com Travel Fix-Kit includes just about everything you need to fix your kite, lines, harness, board, and footstraps. All packaged neatly in a nice Dakine travel case so you are ready to go on your next kite adventure.
The Naish fixed stopper ball tightens on to the chicken loop line above the bar to stop you from depowering the kite too much. Requires a hex wrench to tighten.
Universal pigtails are the perfect replacement for a worn pigtail or for adapting almost any kiteboarding control bar to a kiteboarding kite. These pigtails can be attached to the ends of the fly lines or directly replace existing pigtails on the kite. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail.
The Ozone Chickenloop PU and Lock Tube is the replacement of the lower part of the chickenloop assembly for the Megatron II push-away release system. This line can be used to easily replace the line on Ozone Contact water bars 2014+ model year.
The Skywatch Xplorer 2 windmeter is an extremely accurate way to measure the wind, maximum windspeed, temperature, and windchill factor. Small and compact, the Xplorer 2 is one of the easiest ways to know what the wind is doing, and how much rubber you should put on before hitting the water.
Dakine's kiteboarding specific hook knife has 2 anodized Aluminum opposing blades for easy and instant cutting. This product does NOT come with the pouch, and is for when you're replacing the knife that came with your harness.
PKS Distribution again brings you the latest and greatest repair kit to keep you kiting longer. This Dacron patch kit includes 5 Dacron patches, alcohol prep pads and a 1oz tube of Seam grip repair adhesive that covers a multitude of repairs.
Dakine's kiteboarding specific hook knife has 2 anodized Aluminum opposing blades for easy and instant cutting. This product does comes with an easy-mounting sheath with sewn-in loop to mount to your harness or other location.
New from Overhead Surf is the Cap-Safe Retainer lanyard. Simply attached to your hat or cap and ensures that if it does get blown off your head, it stays with you.
This kit includes micro braiding tool, instructions and pigtail extender. With these tools you can quickly fix a braided Spectra fly line on the spot. Splicing Needle
With the Fixmykite.com Sleeve Kit you can easily replace your sleeved ends or shorten your fly lines and re-sleeve them anywhere you are to get you back on the water in no time.
The 11mm Deflate (Dump) Self-Stick Kiteboarding-Valve is used on most kites as the deflation system.
The new, versatile, sheaveless Shock Block by Ronstan is only 7/8" long, yet it is very strong, super lightweight and designed for performance.
Naish's sliding stopper can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust the bar throw to suite the wind speed or to unspin your bar.
Airush replacement lock tube for brain chickenloop V3
The Crazyfly Lock Tube (donkey stick as they call it), is a simple but flexible one-piece tube that fits right on the chickenloop itself to keep the chickenloop locked onto your spreader bar. This avoids any potential accidental unhooking.
The PKS Lock Tube works great to replace a broken or missing lock tube from your bar. The lock tube hooks to the spreader. This lock tube functions the same as lock tubes that come standard with most modern bar setups. Attach it to your spreader bar and you can use it with any kite even if the bar system does not have a lock tube.
Slingshot replacement lock tube (Donkey Dik) for the chickenloop on Slingshot Compsticks from 2010 - 2014
The new PKS Adjustable Universal Pigtail is the latest and great pigtail for a universal connection between kite and bar. These pigtails are similar to our classic universal pigtail, but are made extra-long and feature a moveable figure-8 knot to allow for adjusting the pigtail length. This is great if your lines settle to different lengths and you need to tune them to get them to be all the same length.
The new, versatile, sheaveless Shock Block by Ronstan is only 1 7/16" long, yet it is very strong, super lightweight and designed for performance.
The Slingshot One Pump Self-Stick-Valve will replace any slingshot kite with a one-pump system. This valve is also compatible with Ozone one-pump systems.
Airush SPS One Pump 45 degree Valve is the perfect replacement valve for all Airush 2008-2014 Kites that uses the Airush SPS 45 degree One Pump System.
The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs through the center of the chickenloop, bar, and depower system. This line can be used to easily replace the lines on Ozone Contact water bars 2011+ model year for both Ozone Megatron and Megatron II Chickenloops.
PKS Kook-Proof Pigtail Sets are complete 8-piece sets, set up in kook-proof fashion with different colors for inside and outside lines, and pre-set knots and pull-tabs for ease of use. Replace worn pigtails or adapt almost any kiteboarding control bar to a kiteboarding kite.
Ronstan Pulley used on larger foil snow sites as well as Naish Kites.
<br /> Do you prefer the clamcleat depower system over the pull-pull system on your Airush bar? Now you can convert it. The Airush Cleat Depower Fitting Fits all Airush kitesurf bars from 2014 on, Smart bar, Analog bar and Core.
The Skywatch Xplorer 4 windmeter is a extremely accurate way to measure the wind and know exactly what size kite to rig up. Small and compact, the Xplorer 4 is one of the easiest ways to know what the wind is doing before you hit the water. The Xplorer 4 features a windspeed indicator, temperature, windchill factor, digital compass, altidude, barometric air pressure, 48-hour history of pressure, and 48-hr history of altitude.
Replacement rope for 2016+ sliding rope spreader bars from Ride Engine. Fits all spreader bar sizes.
Airush 2015+ SPS One Pump 90 Degree Valve is the perfect replacement valve for all 2015+ Airush Kites that uses the Airush SPS one pump 90 degree system.
Ozone pigtails for a 4-line kite. These replacement pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.
These parrel bead stopper balls are UV stable and impact resistant. They measure 20mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.
Dakine's Maniac Spreader bar has become very popular as it allows for freedom of movement riders can make sharp turns and ride toe side with ease. This Maniac Retro Kit includes a new improved, thicker webbing strap which not only lasts longer, but prevents the strap from folding over under the kite specific designed hook. Retro kit is complete with hook and webbing. Note: Spreader bar pad is not included.
Liquid Force replacement pigtails for a 4-line kite. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear.
Set includes 4 Pigtail Set as pctured.
The Airush XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Airush Kites. This valve is also compatabile for use on Naish 2015 and later kites.
The Ozone Trimmer Bracket Stopper Ball is made from strong, durable and high quality plastic. This stopper ball is located at the connection point between the flag-out bungee line and the fly line right at the trimmer bracket.
The New Ronstan Low Friction Ring Pulley provides outstanding strength to weight solution where the absolute minimum friction of a ball bearing block is not required. The Ronstan Low Friction Rings are machined from high grade aluminum with a durable low friction anodized coating. Suits line diameter up to 14mm (9/16")
The WeatherFlow WEATHER Meter is the first WIRELESS Bluetooth Smart portable and mountable weather station under $100 that syncs up to Smart phones and devices so you can record, share, and save all the weather data you could need. Works with iOS and Android devices to measure the wind speed.
The 2015 Dakine Maniac Sliding Spreader Bar is great for toe side riding and is new and improved with a thicker strap and cover for the sliding harness hook.
Cabrinha adjustable pigtails for a 4-line kite. These pigtails attach to the end of your fly lines to connect to your kite. The pigtails can be adjusted by moving the knot on the pigtail to adjust the size of the loop. Always be sure to check you pigtails for wear and tear.
This REPLACEMENT BLADDER is Custom-made to be the right size for GoJoes, offering a replacement for your GoJoe if the bladder gets damaged.
Ronstan pulley used on larger Snow Kite Foils and Naish Kites.
FixMyKite.com Epic/Blade Kiteboarding One Pump Valve is the perfect replacement valve for Blade and Epic Kites.
The Slingshot Power Ball stopper ball tightens on to the chicken loop line above the bar to stop you from depowering the kite too much.
The Dakine Hammerhead Spreader Bar has a unique hook shape and length to keep the center line hooked when needed, but also allows for easy unhooking. Complete with Spreader Bar, Pad, and Hook Knife already assembled and ready to put on your harness.
FixMyKite.com Cabrinha Sprint 90-degree One Pump Valve is the perfect replacement valve for Cabrinha Kites manufactured in 2007 and later.
Slingshot's 2010 and newer active stopper ball can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust it to suit the wind speed.
PKS Kiteboarding Pulley Savers are designed to be a very simple way to back-up your bridle system and keep your wing shape from being compromised should a pulley break in flight. The pulley saver simply attaches around the pulley and bridle line.
These Slingshot kiteboarding pigtails work great as replacement attachment point pigtails at the end of the bridle lines, on the end of your fly lines, or as replacement pulley pigtails.
The FixMyKite.com Universal 90 dergee One Pump Valve is the perfect replacement valve for Kites manufactured with a 1" casing opening.
Ronstan Double Pulleys Replacement Double Pulleys which are used on some of the top brand Kite companies like Cabrinha and Slingshot.
The FixMyKite.com Cabrinha Airlock 1 Screw Valve replaces 2013 and prior Cabrinha valves and is also compatible with 2008 Best EZ pump. For later year Cabrinha screw valves, use the Airlock 2 Screw Valve
Slingshot's active stopper ball for models older then 2009 can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust the bar throw to suit the wind speed.
These kiteboarding pigtails work great as replacement attachment point pigtails at the end of the bridle lines, on the end of your fly lines, or as replacement pulley pigtails.
The Dakine Power Belt Extender adds extra length to your DaKine harness Power Belt if you need some extra room in the front of your harness.
The FixMyKite.com Cabrinha Airlock 2 Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Cabrinha started using these on 2014 kites, so they work on any 2014 and newer Cabrinha. The CAP will NOT WORK in the old Airlock 1 valve base (Cabrinha Airlock with old-style cap, pre-2014), but WILL WORK in 2014 and newer Cabrinha Airlock 2 valves. Also works on cloud kites by board riding maui. Made with TearAid to work with any bladder.
The Naish Swivel for Naish Universal and Fusion bars. The top part of this swivel holds the front lines and the bottom pulley connects to the chickenloop depower rope. Swivel to keeps the front lines untangled.
Replacement Ozone Speed System Pulley Lines. This is the the 4 lines that the pulley run one, including two pulleys. Works with all Ozone depowerable foils 2009+
The Skywatch Eole by JDC offers you a hand-held Anemometer with deluxe features. The large, easy-to-read display shows instant windspeed, maximum windspeed, and average windspeed all at once, while the 54mm impeller on the Eole provides very accurate readings without worrying about the position of the instrument.
The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve). Choose from male, famale, or both to complete your replacement
The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve). Choose from male, famale, or both to complete your replacement.
FixMyKite.com CrazyFly One Pump Kiteboarding Valve replaces valves on all CrazyFly kite models 2015 and newer. Also a compatible replacement for North Lazy pump Gen. 2, Ozone, Slingshot, and Flexifoil.
Replacement Ozone Speed System. This is the full replacement speed system including the pulleys. Works with all Ozone depowerable foils 2009+
The Skywatch Meteos offers you a hand-held Anemometer/Thermometer with deluxe features. The large, easy-to-read display shows instant windspeed, maximum windspeed, average windspeed, instant temperature, maximum temperature, average temperature, minimum temperature, and wind chill factor all at once, while the 54mm impeller on the Meteos provides very accurate readings without worrying about the position of the instrument.
Sliding spreader bar webbing getting stretched or worn out? The Dakine Sliding Spreader Bar Webbing works on Dakine's sliding spreader bars from 2014. Replacement 1-3/4" heavy duty webbing only for DaKine's Sliding Spreader Bar.
FixMyKite.com F One 90 Degree One Pump Kiteboarding Valve For The Leading Edge is the perfect replacement valve for the F One Leading Edge One Pump Valve.
3mm Pulley Bridle Line is used by Cabrinha, Airush, and many major kiteboarding brands. This line is highly abrasion resistant.
The Skywatch Atmos is designed specifically for the agricultural and scientific markets. Wind speed, temperature, and relative humidity are measured. Windchill and dewpoint are calculated on the Atmos. This unit is by far the best device for measuring windspeed, temperature, and humidity. It is simple to use, accurate, and dependable. The hygrometer never needs calibration, maintaining its high accuracy over the life of the product.
Dakine Power Clip Lock Buckle replacement. Easily connect and disconnect your spreader bar. Clip handle lock adds connection security. Narrow bend prevents upward spreader bar twist. Two webbing slots spread the pull to the harness.
FixMyKite.com F One Straight One Pump Kiteboarding Valve (Strut) is the perfect replacement for the F One Strut One Pump Valve system.
Built in Switzerland, the Skywatch BL300 is a complete weather station connected to your smartphone via Bluetooth wireless technology. It accurately measures wind speed, temperature, humidity, and measured data can be stored and shared on Facebook, Twitter, Instagram or bl.skywatch.ch. The Skywatch BL300 is especially dedicated to all outdoor activities like sailing, kite surfing, paragliding, hiking as well as professional use such for agriculture, construction, and more.
FixMyKite.com Liquid Force One Pump 2011 and Newer Valve is the perfect replacement valve for Liquid Force Kites manufactured from 2011 to 2013. For kites manufactured after 2013, see the Liquid Force One Pump Valve 2014 & newer.
Built in Switzerland, the Skywatch BL400 is a complete weather station connected to your smartphone via Bluetooth wireless technology. It accurately measures wind speed, temperature, humidity, and measured data can be stored and shared on Facebook, Twitter, Instagram or bl.skywatch.ch. The Skywatch BL400 is especially dedicated to all outdoor activities like sailing, kite surfing, paragliding, hiking as well as professional use such for agriculture, construction, and more.
Replacement Dakine Pivoting Hammerhead Spreader Bar O-rings for pivoting spreader bars. These are great to keep around just in case one breaks.
FixMyKite.com Liquid Force One Pump 2014 and Newer Valve is the perfect replacement valve for all Liquid Force Kites manufactured in 2014 or later.
The 2017 CrazyFly Sick Bar is a state of the art control system blending together safety, comfort, durability and simplicity.
With safety being the top priority, the Sick bar has a single front line flag out. It ensures 100% collapse of the kite in all situations when the safety is triggered.
The Skywatch® BL500 is a complete weather station connected to your smartphone via Bluetooth® wireless technology. It measures accurately wind speed, temperature, humidity, pressure and UV index, and permits you to share your measurements on most popular social networks.
The Skywatch® BL500 is especially dedicated for all outdoor activities like sailing, kite surfing, paragliding, hiking and so on. It is also very usefull in professional activities, in agriculture and on construction sites, for example.
The 2018 CrazyFly Sick Bar is a state of the art control system blending together safety, comfort, durability and simplicity.
For many years, the Hall Wind Meter has been a popular Airspeed Indicator for hang gliders, paragliders, and ultralights. Airspeed is indicated by the red disc floating on the stainless steel rod. The Hall Airspeed Indicator is an ideal airspeed indicator for kitesurfing. It never needs batteries.
The Naish XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Naish Kites. This valve is also campatabile for use on Airush 2015 and later kites.
The FixMyKite.com North Inflate non-return Valve is the OEM valve North kites used from 2011-2013 plus the 2014 Vegas. A unique non-return valve, it allows for 1-way airflow for Inflation only. Made with TearAid to work with any bladder.
The FixMyKite.com North Lazy Pump Gen. 1 Valve is the OEM valve North kites used for all one-pump connections from 2011-2012 (Generation 1). These also will work on the Best Kites' one-pump systems from 2013 and newer. Made with TearAid to work with any bladder.
The FixMyKite.com Duotone Straight One Pump Valve is the OEM valve Dupotone kites uses for Leading Edge One Pump system. FixMyKite.com Self-Stick-Valves will stick on any bladder material or color. Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder. The specially formulated adhesive is incredibly durable making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.
The FixMyKite.com North Lazy Pump Gen. 2 Valve is the OEM valve North kites used for all one-pump connections from 2013-current 2016 models (Generation 2). Made with TearAid to work with any bladder. (Also compatible with 2015 or newer CrazyFly One-Pump systems.)
The FixMyKite.com Duotone 90 Degree One Pump Valve is the OEM valve Dupotone kites uses for Struts One Pump system. FixMyKite.com Self-Stick-Valves will stick on any bladder material or color. Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder. The specially formulated adhesive is incredibly durable making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.
The Duotone/North Airport Inflate/Deflate Valve will replace the inflate/deflate on all North 2014-2018 models except the 2014 Vegas and all 2019 Duotone kites.This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve. Made with TearAid to work with any bladder.
From the leader in repair technology, FixMyKite.com's Self-Stick-Valves will stick on any bladder material or color. Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder. The specially formulated adhesive is incredibly durable making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.
The CORE 90-degree one pump valve is the original factory valve for CORE kites with a one-pump system.
FixMyKite.com Self-Stick-Valves will stick on any bladder material or color. Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder. The specially formulated adhesive is incredibly durable making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.
The Naish 200 one pump valves are the original factory valves for Naish kites from 2020 model year and newer. The 90 degree one pump valve is for the struts and the Straight valve is for the leading edge.
Fixmykite.com Self-Stick-Valves will stick on any bladder material or color. Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder. The specially formulated adhesive is incredibly durable making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.
The Ozone 90-Degree One Pump valve is the original factory valve for 2014 and newer Ozone kites with a one-pump system. Low-profile shape will also retro-fit onto any 2007-2013 Ozone kite with a one-pump system. This valve is also a compatible replacement for Slingshot, 2013 Crazyfly, Star, Flexifoil, Mutiny, and Ben Wilson kites.
The FixMyKite.com Ocean Rodeo One Pump Valve is the perfect replacement valve for Ocean Rodeo Kites manufactured mid season 2010 and newer.
The Ozone One Pump Valve will work on any Ozone kites that has a one pump system. This valve is also compatible with Slingshot and Royal kites one pump systems.
The Ozone Big Boston Inflate/deflate kiteboarding Valve will replace the inflate/deflate on 2011 and newer Ozone Kite. This valve is also a compatable replacement for the Max Flow Valve from Liquid Force Kite (2011 and later) and All Switch kites.
From the Leaders in Kite Repair technology, Fixmykite.com Self-Stick Valves will stick on all bladders. Simply peel and stick to make a fast and easy repair, or stick it on any new bladder. The FixMyKite.com RRD One Pump Kiteboarding Valve replaces valves on all RRD kite models. Discounts Apply! *Order 6 or more of the SAME valve and receive 10% OFF.
<p>The<strong> RRD Inflate/deflate Screw Valve</strong> will replace the inflate/deflate on RRD kites. From the Leaders in Kite Repair technology, Fixmykite.com Self-Stick Valves will stick on all bladders Simply peel and stick to make a fast and easy repair, or stick it on any new bladder.</p>
The FixMyKite.com Slingshot Complete Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Slingshot has these on some 2015 and newer kites.
The<strong> Switch one-pump Self-Stick valves </strong>are the OEM valves on Switch kites; also compatible with slingshot, Flexifoil, Ozone, Mutiny, and North (Lazy Pump, Generation 1 only.)
The FixMyKite.com Switch Boston Screw valve is the OEM valve on Switch kites 2015 and newer. Can also be used on Ozone kites (2011 and newer).
The FixMyKite.com Switch Boston Screw valve Cap Only is the OEM replacement valve cap on Switch kites 2015 and newer.
The FixMyKite.com Cabrinha Airlock 2 Screw-CAP ONLY is the top screw portion with Cap for the new inflate/deflate screw valve Cabrinha now used on their kites (2014 and newer). This product does NOT include the base or Stick-on patch. This WILL NOT WORK in the old Airlock valve base (Cabrinha Airlock with old-style cap, pre-2014). Also works on cloud kites by board riding maui.
Replacement 2011+ Ozone Boston Inflate/Deflate Valve Red Cap for Ozone's Boston valve.
The FixMyKite.com Slingshot Complete Screw CAP ONLY is the top screw portion with Cap for the new inflate/deflate screw valve that Slingshot now uses on their kites (some 2015 and newer). This product does NOT include the base or Stick-on patch. This will NOT WORK in the old Airlock 1 valve base (Cabrinha Airlock 1with old-style cap, pre-2014), but WILL WORK in 2014 and newer Cabrinha Airlock 2 valves. Also works on cloud kites by board riding maui.
The FixMyKite.com Naish XLScrew Valve -CAP ONLY is the top screw portion with Cap for the new inflate/deflate screw valve Naish uses on their kites 2015 and later. (This valve cap is also compatible for Airush 2015 and later kites, and RD kites with the large screw valve.). This product does NOT include the base or Stick-on patch. This WILL NOT WORK in the old Airlock valve base (Cabrinha Airlock with old-style cap, pre-2014).
The <strong>FixMyKite.com Airush XLScrew Valve -CAP ONLY </strong>is the top screw portion with Cap for the new inflate/deflate screw valve Airush uses on their kites 2015 and later. (This valve cap is also compatible for Naish 2015 and later kites, and RD kites with the large scew valve.). This product does NOT include the base or Stick-on patch. This <u><em><strong>WILL NOT WORK</strong></em></u><em><strong> </strong></em>in the old Airlock valve base (Cabrinha Airlock with old-style cap, pre-2014).<br />
Replacement cap for Star/BWS/Ozone/CrazyFly
Naish 2020 Surelock Valve body with plug replacement.
Replacement Dyneema Kite Bridle line works for any standard bridle setup. Rated for use as a kitesurfing, snowkite bridle. Custom Lengths Available See Product Description.
Leader Line for Kitesurfing, Landkites, and Snow kites. Sewn loops can be added to one or both ends, and lines can be made to any length desired.
FixMyKite.com 90 degree (L-Stem) Adapters will fit in the standard 9mm Inflate or 2-way valves for one-pump connection. Valve adapters fit in any 9mm opening. Comes in a set of 5.
Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is high-strength, low-weight, low-drag, coated line reduces tangling. You can tie your own knots in this line without weakening line.
Q-PowerLine is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is high-strength, low-weight, low-drag, coated line reduces tangling. You can tie your own knots in this line without weakening line.
Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is high strength, low weight, low drag, coated line reduces tangling. SPOOLS come in 2 length options.
Pefect replacement for any Slingshot bar that uses the lock n' load chicken loop. This includes T2, T3, Rev1, Rev2, RPM, and Fuel kites.
The 2010-2014 Crazyfly Depower Line is the double-duty line on the 2012-2014 Crazyfly Sick Bars which acted as both a dual-line Depower line and Sheeting Strap. These wear down over time, and it's a cheap and easy part to replace to ensure your bar ist strong and top notch.
PKS One-Pump Hose is a heavy-duty flexible hose with higher density than standard factory one-pump hose. This means it will not just be the only replacement hose you will ever want to use, it will also last years and years. In 2 sizes: Inner Diameter (ID) 1/4" or 3/8" (6.35 or 9.5mm).
Our Naish Depower Replacement line with strap is almost identical to the line that comes on 2009 and 2010 Naish kites. The Naish Depower line has a stitched in loop on one end with their signature Bead/Strap combination on the other end. It's a quick and easy fix to replace your old worn-out line.
OEM Factory Naish Depower trimline for 2012-2016 Universal and Fusion bars. High strength Spectra Line, stopper ball and expert riders leash connection with nylatron.
.
OEM Silicone One-Pump Hose is a heavy-duty flexible hose with a 1/4" inner diameter, standard factory one-pump hose. This means it will not just be the only replacement hose you will ever want to use, it will last!
Hose is sold by the foot so you can cut it to your specific needs. For more than one foot, just up the quantity when ordering. hose will be sent in 1 continous length of hose.This hose is the standard size for most valves on the market including Advance, Best, BWS, Cabrinha, Core, Crazyfly, EH, F-One, Flexifoil, Flysurfer, Liquid Force, Nobile, North, Ozone, Ocean Rodeo, RRD, Slingshot, Spleene, Star, Switch, Takoon, Vari, Wainman, and I possibly Zian
Our 2013 and newer North Depower Replacement line is almost identical to the line that comes on North kites. The North Depower line has knot on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.
Our North Depower Replacement line is almost identical to the line that comes on North kites. The North Depower line has a stitched in loop on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.
The PKS Kiteboarding One Pump Hose Kit has all you need to replace the hoses and clips for an external one pump system. Works on most kites. Easy to use and fits like the original factory set. Choice of 3 or 5-strut kit.
Replacement Slingshot Depower line for 2010 and newer Slingshot Comp Stick.
Our Best Depower Replacement line will work on any Depowerable Best kite, from 2007 -2009.
Slingshot Depower Handle for use on Slingshot depower line.
<p>Ozone depower handle for Ozone kites or any custom depower set up.</p>
The PKS Kiteboarding One Pump Hose Kit has all you need to replace the hoses and clips for an external one pump system. Works on most kites. Easy to use and fits like the original factory set.
Slingshot CSS Safety Bungee. Replaces any 2010-2014 comp stick safety bungee.
The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 2014+ kite models that have the push away release Megatron II flag out system.
The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 2009-2013 kite models that have the pull release Megatron flag out system.
The Ozone Megatron Chickenloop Safety Release Bungee is the replacement bungee line found on the red plastic piece of the Megatron release system. This bungee line can be used to easily replace the bungee on both the Megatron and Megatron II chickenloops.
Naish Flag Out Line Bungee. Compatible with both Fusion and Universal Systems
The Naish Nylatron Insert with screws is the replaceable insert on all Naish Control Systems manufactured from 2015 to current (Fusion, Alana, Torque). Made of nylon, the insert dramatically reduces friction and wear on the trim line. Included screws make this a quick and easy replacement with a universal key.
Cabrinha 2015/2016 recoil slider for recoil bar.
Cabrinha 2015/2016 recoil spring for recoil bar.
The Ozone Contact Bar Flag Out Ring with Swivel works on all Ozone snow and water kites for 2014+ model year. This ring is attached to the base of the flag our bungee that runs through the chickenloop.
The Crazyfly Cleat is their unique cleat for the Trim-line (Sheeting strap) on 2015 kites and newer for the 2015 CrazyFly Sick Bar.
Slingshot trim cleat for 2010 and newer compstick guardian. 4mm screws included
The Racer-Back Clamcleat is the most trusted cleat in Kiteboarding and used by many top brands such as Ozone. Amsteel/Chickenloop line can be woven through the back of cleat to secure it in place while the front side with the teeth is used as a depower cleat.
Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.
FixMyKite.com replacement hose clamps for kites with one pump hoses.?
Neoprene Clip covers are used to cover the isolating clips on most one pump inflation systems. These are a great way to protect your kite from damage from the plastic clips. $4.00 each
KiteFix’s best Seller! This repair package contains all you need to make permanent repairs. Hand assembled in Canada with high quality products, KiteFix’s repair kit is a must to be added to your equipment. Includes: 1 Glufix tube (1 oz.), 2 self-adhesive dacron rolls (Black & White, 5’ each.), 7 Fiberfix tapes (4’ each), bladder ultra-adhesive patches (3’’x 7’’), 1 Peel2Fix valve repair system, 1 Talkine bottle (3 oz.), 1 Glufix applicator, 3 tie raps, 1 detailed user’s guide, 1 pair of scissors, 1 plastic bag, 1 kitefix sticker. All put together in an airtight plastic container. (product code: kx-0401)
The mini-kit is our compact and economical package. Includes: 1 Glufix tube (1 oz.), 2 self-adhesive dacron stripes (black & white, 12’’), 1 Fiberfix tape (4’), bladder ultra-adhesive patches (3’’x3 ½”), 1 Glufix applicator, 1 detailed user’s guide, 1 brush, 1 KiteFix sticker.
For ripstop tears from 1'' to 48''
Fiberfix is the reinforcement fiber to be used with Glufix. This self-adhesive fiber increases up to 10 times the resistance of a repair. In order to have a permanent, ultra-resistant, esthetic repair in a record time, you simply have to join the 2 parts of a tear together with the Fiberfix and add a layer of Glufix over it. 7 colors package. Size: 4’ each
These parrel beads are uv stable and impact resistant. Maximum rope diamenter 3/16".
Knotless StopperKnotless Stopper allows you to move the stopper anywhere on the line without undoing a knot. The knotless stopper works with flylines and leader lines. Many uses.
Choose which Cabrinha Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Cabrinha kiteboards from 2014 to the current model year.
2016 Crazyfly Kiteboarding Hexa Binding screws and washers. Great replacements if you ever lose a screw on the water or during travel.
Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacment lines. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.
This kit includes micro braiding tool, instructions and pigtail extender. With these tools you can quickly fix a braided Spectra fly line on the spot.
The PKS Self Launch Tool: We would like to introduce you to another innovative Product that most everyone can use! This little tool is what every KiteBoarder needs in their arsenal. For those days when everyone else is working and you find you’re self alone at your favorite Kite Spot and no one to launch or land your kite. Now you’re no longer limited to needing someone to launch or land your kite.
A Sewing Awl works great for harness repair or even to fix a busted footsrap. Can sew through thick tough material and make a fast, durable repair. This has saved us on trips after a harness blew out from one too many uses.
Kite weight bag to hold down your kite or use for self launching. Fill 3/4's of the way with sand and close with sewn in velcro. Bag closure system prevents sand from coming out when you don't want it to. Every kiter could use one or two of these. Measures: 24 x 14 inches Can Hold up to: 21 lbs.
Ripstop sail tape is the best way to repair cuts in the sail of your kite. This Nylon tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
Mini pigtails with a loop on one end and a knot on the otherend. Approx. 3.25 inches in length, made of Dynema/spectra line. Sold as a set of two pigtails
The Bladder-Patch Install Kit which includes a bladder protection sheet and a 6x6-Inch (15.24 x 15.24cm) Patch. If your screw valve has to be cut out of the old bladder, then you need the Patch Install Kit.
Fixmykite.com again brings you the latest and great kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.
Spectra Chickenloop line is the standard for replacing the line running through your chickenloop and bar. The line can be ordered in bulk by the foot for do it yourself repairs, or in custom lengths with or without sewn in loops to replace specific lines. Super-durable, 2000 lb test strength.
The Ozone Foil Stall/Brake handle attaches to the 2015+ Contact Water and Contact Race Control bars to convert the bar to Foil Freeride and Foil Race bars. The brake strap attaches around the relaunch balls with a bungee to the steering leader lines. These stall handles come standard on all Ozone snowkites/foils.
Line Extensions allow you to tune your kite lines to the exact length that you want. Extensions are made in a set of four (4) from 700 lbs. line with sleeved and sewn loops on both ends.
CUSTOM lengths are possible, including mixing lengths for outer and inner lines.
Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.
Ozone line extensions are made to be used with all Ozone water kites and the Ozone Contact Water, C4, or Race Control Bars. Adding extensions to your lines can give your kite that extra height to find some cleaner wind and also give you a bit more power for those lighter days.
Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.
PKS High Visibility Fly Line sets are specifically designed for kiteboarding, and are the same quality as all the other top brands. Why pay more for the same product?
PKS Trainer Kite Lines fly above the rest. PKS trainer lines are 200 lbs. blue lines for high-visibility, and made from Pre-stretched Spectra to several lengths to fit your Custom needs. Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there.
The PKS MINI Slider-Release Leash is fully releasable under load, and has removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. MINI length = 22 inches (55cm)
The PKS Slider Handle Pass Leash is fully releasable under load by pushing the soft foam handle, and have removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. Length = 46 inches (115cm)
2019 Dakine Kite Leash Shorty. Short leash with standard push away release. If you like minimal and functional, this is the leash for you. Clean, simple, and easy to use if you ever need it.
<p><strong>Naish Fusion Short Leash</strong>. New this season the clean and easy to use Push-Away release leash.</p>
2018 Cabrinha Short leash with standard push away release. If you like minimal and functional, this is the leash for you. Clean, simple, and easy to use if you ever need it.
The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.
<strong> Naish Fusion Handle Pass Leash</strong>. New this season the clean and easy to use Push-Away release leash.<br />
North 2017 Handle pass leash<br />
The PKS EZ Leash Connect is the perfect product to put your leash attachment where you want it on your harness. Simply larkhead this to the spreader bar, leash ring, or back of the harness to create a quick accessible leash connection point.
The Dakine Kainui surf leash is an all condition surf leash with maximum strength urethane cord and precision molded fittings. The Kainui surf leash is not recommended for kiteboarding and is intended for surfing only.
The PKS Pro Flow V3 kite pump is the next ingredient for your successful kite session. Our tweaked version of the newest and best pump on the market is constructed with high quality components and measures 20" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.3 liters of air per pump. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time.With high grade shaft and piston seals, the v3 PKS Pro Flow Pump will outlast any other pump on the market. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
This newly engineered pump features a PSI gauge integrated into the handle, foam air filter to catch sand, new premium extra-durable and flexible hose, pump adapters for standard 9mm inflate as well as larger boston screw valves, ergonomic handgrips and foot base, and kite tether.
The latest and greatest PKS Pro Flow V3 MEGA kite pump is the next ingredient for your successful kite session. Our tweaked and upgraded version of the newest and best pump on the market is constructed with high quality components and measures 24" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.9 liters of air per pump. The taller pump is great for taller people or getting more air per stroke than other pumps. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
The Bravo 20-2 Electric Pump has everything you need to pump your kiteboarding kite, stand up paddle board (SUP), raft, boat, kayak, or other inflatable items all in one convenient package.
The CORE Pump 2.0 is re-invented! Although our shiny new black pump features a longer barrel, ergonomic hand grips, a fatter hose and a redesigned base, its biggest innovation hides inside. Internal pump friction is virtually eliminated and our “Sand Guard” air filter prevents internal kite damage from sand inhalation. Although our kites do not need an adapter, we included one anyways for those “other” kites. Check out the innovations we built into this pump:
NO STRAIN PUMPING Save your energy for the water. Innovative materials, seals and piston coatings have virtually created a frictionless pump. We even increased the diameter of the hose outlet to increase airflow and reduce pump strain.
SAND GUARD Sand belongs on the beach, not in your kite. So we built a foam air inlet filter into the handle. Why, you ask? To prevent sneaky sand from damaging your kite bladders and reducing pump efficiency.
SINGLE TO DOUBLE STROKE INFLATION SWITCH More pressure with the turn of a knob. The last few pumps are always the hardest with a 2 way pump. So we decided to give you the option to switch from traditional double stroke to single stroke pumping for the last bit of air.
DIGITALLY CALIBRATED PRESSURE GAUGE Perfect pressure every time without guessing. The new digitally calibrated pressure gauge has a simple colour coded scale to make precise inflation a breeze.
LONGER BARREL, LONGER STROKE FOR MORE AIR VOLUME We extended the barrel a few centimeters from the previous model to provide a more upright pumping posture. The additional length also increases pump volume with each stroke. Your back will thank you.
ERGONOMIC GRIPS Our longer, wider ergonomic grips make pumping a breeze. The grips contour to your palm and fingers so you can leverage your body weight without leaving marks.
HEAVY DUTY PUMP TETHER WITH A NIFTY HOOK Pumps are often neglected. So we built our new CORE Pump 2.0 to last. We even doubled the thickness of the tether and installed an oversized hook. Because we understand.
Cabrinha XL Pump
CrazyFly really outdid themselves with this year's kite pump. It boasts many new features, most note worthy being the addition of a valve which controls pressure and capacity. When closed, the pump moves air on both the up and down stroke for high capacity and when the cap is open is only moves air on the down stroke for high pressure pumping.
Pump up the JAM with the Duotone kite pump. 20" height with a sturdy hose and easy to read pump gauge.
Didn't pumping your kite go fast enough? Then you need the Duotone Kite Pump XL. The XL version of the kite pump has more volume so you need less pumps to fill your kite! Just like the standard version of the Duotone kite pump, the XL also has a double action and a single action stand. Start pumping up your kite in the double action stand and do the last few pumps with the single action stand so that you can pump up your kite as hard as you want for higher pressure. The pump is equipped with a good pressure gauge so you always know if your kite is hard enough. The Duotone Kite pump XL can be used to inflate kites with the valves of Duotone and North but also boston valves like those on Naish, Cabrinha and Core. Features
This is a simple kite leash attachment point extension for connecting your pump while pumping your kite.
Replacement pump leash for pumping up your kite
The Cabrinha Airlock 1 Screw Valve adapter: compatible with 2013 and prior Cabrinha kites (and 2008 Best EZ screw valves)
This big Boston valve (screw valve) pump adapter / nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), Naish, Crazyfly, Airush (2015 and newer,) and Switch kites.
This threaded big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer), and Switch kites. This adapter screws onto the top of the Boston valve for a more secure fit compared to the friction-fit adapters typically found on most pumps.
The North and Core Pump Adapter/Nozzle is compatible with Core kites and newer North kites (2013 and on), Duotone kites, and Cabrinha Airlock 2 kites.
The Liquid Force Valve Pump Adapter/Nozzle is compatible with Liquid Force kites manufactured 2011 and later with the Max Flow valve.
The North Airport Pump Adapter/Nozzle is compatible North kites (2013 and on)
The 7mm and 9mm Pump Adapter is compatible with almost all kites prior to about 2008. Nearly all older kites which include the 2 valve inflate and deflate systems included 9mm or 7mm valves. This is also the adapter used for inflating struts on kites without a one-pump system.
The PKS Universal Pump Adapter/ Nozzle - 5 Piece Set fits on standard kite pump hoses. The 5 piece set includes an adapter for compatibility with each of the major kite brands. Cabrinha, CrazyFly, Airush, Naish, Ozone, North, Core, Liquid Force, Epic, Blade, and more.
2" Wide (Two-inch Wide) Dacron Tape should be used to repair all cuts in the leading edge and struts of an inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
New 2017 Slingshot Kiteboarding Kite Pump with pressure gauge, integrated sand filter, premium high-flow and extra-durable hose, and the two extra kite nozzles to fit most most kites on the market.
Tear Aid Bladder patches are the BEST patch out there to seal leaks and small cuts in bladders. The roll can be cut into any size desired for patching, whether your bladder problem is small pinholes or 2-foot long cuts. 30 ft. x 1.25-Inch or 3-Inch or 6-inch Rolls (60 patches). Note that long cuts (more than 6 inches) or cuts next to the seam of bladder can be harder to ensure a good seal on. Long cuts are rarely straight lines.
Tear Aid Bladder patches seal leaks and small cuts in bladders, the perfect repair material for bladder blowouts. These patches are self stick (peel & stick) and can be used to patch any bladder material or color. The specially formulated adhesive is incredibly durable making for a quick repair. Patches can be used on leading edge or strut bladders and sail materials.
Fixmykite.com again brings you the latest and greatest kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.
Fixmykite.com again brings you the latest and greatest kit to keep you kiting longer. This Pinhole patch kit includes 3 different materials for patching any part of your kite! Tear Aid patches that cover a multitude of repairs and are used mainly for pinhole leaks in bladders. Dacron patches for covering scrapes and pinholes in the Leading edge or struts. Ripstop sail tape to repair a slice or tear on your sail. You can find so many uses for this kit it will blow your mind! All patches are cut into circles so there are no pointy corners to prevent peeling up on you. Includes:
PKS Double-sided Seaming Tape is ideal for Kite repairs, along edges that have to be closed, Leading Edges, Trailing edges, strut, etc., and is suitable on foil kites and Inflatable kites. Sold by the ROLL only, 1/4" (6mm) x 72 yards (65.8 meters).
All your kite repair needs in a nice package with a nice price!
FixMyKite Fix Kit, One-pump Hose and zip ties, Ripstop Sail Tape, Kook-Proof Pigtails, and the TearAid 2-Pack.
Seam Grip goes beyond seam sealing and patching holes. It waterproofs tents, improves traction, and offers abrasion resistance, too. It works on all types of fabrics, including nylon, vinyl, neoprene, PVC, rubber, and leather. So take a tube of Seam Grip wherever you go, because you never know when gear will rip, leak or fall apart. Save your gear?and your adventure?with the award-winning Seam Grip waterproof seam sealer.
Aquaseal, Urethane Repair Adhesive & Sealant. The industry standard for maximum strength repairs to wet suits, dry suits and all water sports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses.
Glufix is the only adhesive specially conceived for kitesurfing equipment. Ultra resistant and flexible, Glufix will allow you to make permanent and durable repairs on your kitesurf equipment. Used with Fiberfix, one Glufix tube can allow you to repair a tear as long as 4’ long!
Cabrinha sprint tubing collar set of 5 or 10. Works on sprint valves from 2010-2015.
Cabrinha Flyline Stopper
The Ozone line winder will help you keep your lines nice and neat
Four Line cluster can be used to build your custom bar. Is capable of being used for 4 line or 5 line. dimension 3.5cm x 2.5cm
Three line cluster can be used to make a custom 4 line bar. Dimensions 2cm x 1cm.
Forgot your password?
Already Registered?
OR
