Build a Bar Workshop

PKS Reedin Pigtail Set
PKS Replacement Reedin pigtail Set. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear. Made from 7/64" 100% Dyneema line.

Set Includes:

• 1 - Red Loop-Loop pigtail with pull tab
• 2 - Grey Loop-Knot pigtail
• 1 - Blue Loop-Loop pigtail with pull tab

The Naish Swivel for Naish Universal and Fusion bars. The top part of this swivel holds the front lines and the bottom pulley connects to the chickenloop depower rope.  Swivel to keeps the front lines untangled.

Duotone Item No. 44900-8194

V Distributor II for Click Bar (SS18-22)

Compatibalility:
2018-2022 Duotone / North Click Bar

The new PKS Adjustable Universal Pigtail is the latest and great pigtail for a universal connection between kite and bar. These pigtails are similar to our classic universal pigtail, but are made extra-long and feature a moveable figure-8 knot to allow for adjusting the pigtail length. This is great if your lines settle to different lengths and you need to tune them to get them to be all the same length.

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap.

These Slingshot kiteboarding pigtails work great as replacement attachment point pigtails at the end of the bridle lines, on the end of your fly lines, or as replacement pulley pigtails.

These Slingshot kiteboarding pigtails work great as replacement attachment point pigtails at the end of the bridle lines, on the end of your fly lines, or as replacement pulley pigtails.

Ozone Bar Floats, they work as replacements on the older Ozone Contact Water, Snow, and Race bars, or use them for building your own custom bars.

Naish's sliding stopper can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust the bar throw to suite the wind speed or to unspin your bar.

PKS Kook-Proof Pigtail Sets are complete 8-piece sets, set up in kook-proof fashion with different colors for inside and outside lines, and pre-set knots and pull-tabs for ease of use.  Replace worn pigtails or adapt almost any kiteboarding control bar to a kiteboarding kite.

Our Naish Depower Replacement line with strap is almost identical to the line that comes on 2009 - 2017 Naish kites.  The Naish Depower line has a stitched in loop on one end with their signature Bead/Strap combination on the other end.  It's a quick and easy fix to replace your old worn-out line.

Our 2013 and newer North Depower Replacement line is almost identical to the line that comes on North kites. The North Depower line has knot on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.

Our North Depower Replacement line is almost identical to the line that comes on North kites. The North Depower line has a stitched in loop on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.

Replacement Slingshot Depower line for 2010 and newer Slingshot Comp Stick.

The Racer-Back Clamcleat is the most trusted cleat in Kiteboarding and used by many top brands such as Ozone. A lightweight and compact cleat on a rope. Easy to rig and adjust by hand. Amsteel/Chickenloop line can be woven through the back of cleat to secure it in place while the front side with the teeth is used as a depower cleat. The position of the cleat on the line can be adjusted by hand. No tools required.

Standard:

• Line Sizes - 3/16"-1/4"
• Size - 2 7/8" x 5/8"

Micro:

• Line Sizes - 1/8"-5/32"
• Size - 2-3/8" x 1/2"

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.

This is a Naish, Flag Out Stopper for the center Fly Lines. It can be used on kites that use a Single Front Line Flagout system to prevent the bar from sliding all the way to the kite when flagging out the kite or "punching out"

A simple 2 part stopper that attached to the line with a friction connection tightened by two screws.

Includes:
2 Piece Stopper
2 Screws

Stainless steel rings are 1" diameter and are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 1-Inch Diameter

• 1-Inch Outer Diameter
• 3/4- Inch Inner Diameter

Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

Tylaska Snap Shackle - Trigger Release Shackle

Tylaska T5 Trigger Release Snap Shackles are perfect for kiteboarding and small boat applications requiring immense strength and low weight. They have a breaking strength of 5,000 pounds and weigh just 2.2 ounces in the standard bail configuration.

Features:

•     17-4 PH Stainless Steel
•     5000 lb breaking strength
•     2.2 oz (59 g)
•     Highly Polished Stainless Finish

The PKS Flyline Pigtail Stopper Loop is a simple stopper for use on a flyline connection to a trimmer bracket or line organizer to dead end the fly line.