Ripstop sail tape is the best way to repair cuts in the sail of your kite. This "peel and stick" Nylon tape will provide the strength needed to repair small cuts in your kite to get you back out on the water fast.
*Can also be used on paragliders and sails.

The PKS Self-Launch Sand Anchor is another true innovation in the world of kiteboarding and self reliance. This amazing Self-Launch Beach Anchor can be used to self-launch your kite with nothing around but sand.

<p><br />
Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.</p>

Australia water shades are surf polarized sunglasses designed by Ocean for the water lovers.&nbsp; Ocean has developed these surf polarized sunglasses focusing on the most extreme conditions.&nbsp; They have ATOM system polarized lenses which reduce the harmful effects of the suns rays reflecting on the water.&nbsp; The glasses do float thanks to the frames.&nbsp; Additional float included for added protection.&nbsp; <br />

<p>Designed to offer style and functionality. The  CUMBUCO by OCEAN Sunglasses has everything that any water sports lover  would wish for; Polarized lens  with ATOM system which provides  safety. Coating-water repellent and Anti-impact protection.&nbsp; Features a polycarbonate material for a light yet durable product.</p>

This soft zipper case adds extra protection and padding when storing your water shades. It features a hook on one end, as well as two loops on the back, allowing you to attach it to different objects in various ways.

This Sand Weight Bag is a kiter's essential item.  You can use the sand weight bag to stop your kite from blowing away on a windy day, reduce sail fluttering which reduces wear on your kite, and also use for self launching. Every kiter could use one or two of these.

The HitchSafe makes any kiteboarders or surfers life easier. Figuring out what to do with the keys before going surfing or kiteboarding can be a big pain but we finally found a good, affordable solution that only takes a couple minutes to install.

The Hitchsafe replacement cover is made to look like any normal hitch cover, but covers the Hitchsafe stored in the hitch of your truck including your keys and valuables.

The Hitchsafe Extender Pins are for 2005-2023 Toyota Tacoma and the 2007-2023 Tundra OEM hitch receivers.

Replacment trim/depower rope for sentinel bar system.

Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.

The Ozone Contact Bar Flag Out Ring Cone..

PKS KISS Loop V2 - Replacement Line with T-Pin

This is a replacement Kiss loop Line only, with the T-Pin to replace your center line.

Includes

• KISS Loop line with T-Pin

Features

•  Compact & lightweight
•  Low friction
•  Deep, secure lashing groove
•  Durable
•  Simple & reliable design
•  Low maintenance

The new PKS Universal Pigtail V3 is the newest pigtail from PKS Distribution for a universal connection between kite and bar. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines or directly to the bridles on the kite and you're all set to connect to the loop or knot on the other side, making a nearly kook-proof connection point.

The pigtails are 6 inches in length, made from Spectra leader line, and come as a set of 4: 1x red, 2x grey, and 1x blue.

V3 Changes:
Double Overhand Knot compared to figure 8 on v2
Full length uniform splice
100% Made In USA

Don't forget to always check kite's pigtails for wear and tear.

Tef-Gel is a Corrsion inhibitor and Anti-Seize lubricant that is perfect for kiteboarding hardware, specifically for your Foils and Foil boards.

ION Wetshirt Hood Men LS Hoodie

What Ion has to say about the Men's Wetshirt:
Features:

    Slip Loop
    UV Protection

Materials:

    100% POLYESTER

Repair for the Megatron II Medium Chicken Loop Hrness Loop repair kit.


Follow this link for a how-to!!

https://www.youtube.com/embed/il6kxXJsdUQ

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and includes the extra PU tube for a tight fit.

These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.

Designed to give you the freedom to tighten up wherever you are.  This is a tool that  is nice-to-have on hand.  All parts fit inside tool for compact storage in a pocket or Kite bag. 

Designed to give you the freedom to tighten up wherever you are.  This is a tool that  is nice-to-have on hand.  All parts fit inside tool for compact storage in a pocket or Kite bag. 

Adaptive Leash Eye 2.0

Safety first! With the Adaptive Leash Eye you can attach your safety leash to the front webbing of your harness, which is the safest position since it is always within reach when things go south.

Material:

• Plastic overmoulded stainless steel

Duotone Item No. 44900-8175

Leader lines for  Click Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Click Bar

Duotone Item No. 44900-8141

Hopper with Velcro and Plastic Part(SS08-SS22)

Compatibalility:

SS13-SS22 Duotone / North Trust Bar

Duotone Item No. 44900-8160

Spare Red Safety Line (SS16-22)

Compatibalility:
2016-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8134

Depower Line & Duotone allen key (SS13-SS22)

Compatibalility:
2013-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8177

Suicide Ring III Trust Bar (SS17-SS21)

Compatibalility:
2019-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8159

Strong Middle Line (SS15-22)

Compatibalility:
2015-2022 Duotone / North Trust Bar

Duotone Item No. 44210-8107

Red Safety Line for Click Bar (SS18-22)

Compatibalility:
2018-2022 Duotone / North Click Bar

Cloud Kites Control System Rebuild / Upgrade

Are your Cloud Kite control system center lines showing more wear than you like? Ship your Cloud Kites control system to us and we will rebuild your center line system with new lines using your existing hardware.

This for the center lines only. If you want a complete system built on a KISS Bar, we can do that too

Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.

he Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4 Click-In Loop.

The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Race and Foil Race Control Bars V4 Click-In Loop.

Replacement Blue Trim line for the Ozone Race Bar depower system

PKS Stainless steel trimmer bracket / line organizer is a good replacement for many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 

Includes:

• Trimmer bracket
• Mini Stopper Pigtail

Replacement Bar End Bungees for Ozone V4 Control Bars. - Set Of Two

Duotone Item No. 44900-8154

Metal Ring (SS08-onw)

Compatibalility:

SS08-onw

Duotone / North Trust Bar

Duotone 2023 Trust Bar Quad Control Bar

The Trust Bar has been the go-to control system for riders who prefer the traditional depower rope and cleat system, but there is nothing traditional about the new 2023 Trust Bar! Instead, it?s packed with the latest technologies, including the new Iron Heart VI Click-In Safety System and FLITE99 lines. This is the only bar you will ever need, as the bar width and line lengths can easily be adjusted to suit your kite. The bar is adjustable between 42 and 49cm with 22m lines with 2m extensions.

HitchSafe Replacement Drawer. This is replacement drawer for the version of HitchSafe after 2011. The newest revision of the HitchSafe [launched August 1, 2011] requires a different drawer style and the prior drawer is not compatible with this system. Be sure to also look at the description of our newer drawer HS7041 to be sure you have the right drawer. To know if you have the new style of HitchSafe. The drawer itself is different with each corner having an angle notch out of it. Inside the Vault portion of the HitchSafe above the spring on the back wall will have the following version code: AL-215-311, 2011.If the year is less than 2011, then it is a prior version of the drawer that you will need. Another easy way to tell is that the flange on the body will have 2 rivets on each side.

Replacement drawer for HitchSafes purchased after 2011
Secures keys, cards and valuables during outdoor activities that are a hassle or can become lost
Easily allows you to set and change your own combination any time with 10,000 codes possible
Features all metal construction
Designed specifically for HitchSafe

PKS Slider Option for Ozone Alpha

This is a system designed by Jeff Howard to change the Ozone Alpha bridle system from a static bridle to a sliding bridle. Made with Ronstan Low Friction Shock Blocks and Spectra Line, the PKS Slider option for the Ozone Alpha will make make the kite smoother in turns by changing the turn radius of the kite and allowing the leading edge to ease into direction changes. By installing the slider option, you can reduce bar pressure, maintain power and control, and smooth the overall feel of the kite.

The Naish fixed stopper ball tightens on to the chicken loop line above the bar to stop you from depowering the kite too much. Requires a hex wrench to tighten.

JDC Skywatch - Wind
A pioneer in the field of hand-held anemometers, JDC Electronic has been focusing its know-how on the development of quality anemometers since 1984 with its Skywatch brand, bringing together two watchwords: simplicity & efficiency.

The Skywatch Wind measures wind speed, air temperature and wind-chill rapidly and accurately. Small enough to bring anywhere, insensitive to dust and shock with a user-replaceable propeller, the newest member of the JDC family is designed and manufactured in Switzerland.
 

JDC Skywatch - Wind
A pioneer in the field of hand-held anemometers, JDC Electronic has been focusing its know-how on the development of quality anemometers since 1984 with its Skywatch brand, bringing together two watchwords: simplicity & efficiency.

The Skywatch Wind measures wind speed, air temperature and wind-chill rapidly and accurately. Small enough to bring anywhere, insensitive to dust and shock with a user-replaceable propeller, the newest member of the JDC family is designed and manufactured in Switzerland.
 

M6 Hydrofoil Mounting Screws

These are M6 Stainless Steel screws for any hydrofoil that uses the M6 T-nut, which which will work on all M6 Tracked hydrofoils.  These are Hex Head (socket cap), counter sink screws

Sold individually

North Navigator Center System Rebuild - Complete Kit

A Center System rebuild kit for the North Navigator bar that includes all th eparts you need to make you bar new again!

Includes:

• Elasticised Trim Line
• Trim Handle & Stopper Ball
• Power Bracket
• Cleat Kit
• Depower Main Line complete with Tubing
• Landing Line with swivel

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.