Repair Products

The kite repair kit by FixMyKite.com includes everything you need to do an emergency repair. This kit is essential for any kiteboard trip.

Always check pulleys for wear and tear and replace when needed. A broken or jamed pulley can ruin a kite bridle. $8.25 per pulley

 

NEW LOWER PRICETuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under any load then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available

 

Ripstop sail tape is the best way to repair cuts in the sail of your kite. This "peel and stick" Nylon tape will provide the strength needed to repair small cuts in your kite to get you back out on the water fast.
*Can also be used on paragliders and sails.

Replacment trim/depower rope for sentinel bar system.

Ozone trimmer handle for V4 or older

The PKS Replacement Ozone Speed System is the interface between the fly lines and the bridle of the kite. This speed system works on all Ozone depowerable foil kites since 2009 including the Access, Frenzy, Manta, Summit, Blizzard, Subzero, Chrono, R1 , and Hyperlink. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span.

 

With the PKS Replacment Speed System, you get the option to order Lines only or complete with the pullies.

The Ozone Contact Bar Flag Out Ring Cone..

The new PKS Universal Pigtail V3 is the newest pigtail from PKS Distribution for a universal connection between kite and bar. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines or directly to the bridles on the kite and you're all set to connect to the loop or knot on the other side, making a nearly kook-proof connection point.

The pigtails are 6 inches in length, made from Spectra leader line, and come as a set of 4: 1x red, 2x grey, and 1x blue.

V3 Changes:
Double Overhand Knot compared to figure 8 on v2
Full length uniform splice
100% Made In USA

Don't forget to always check kite's pigtails for wear and tear.

Repair for the Megatron II Medium Chicken Loop Hrness Loop repair kit.


Follow this link for a how-to!!

https://www.youtube.com/embed/il6kxXJsdUQ

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and includes the extra PU tube for a tight fit.

These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.

Duotone Item No. 44220-8136
Sliding Stopper for Trust Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Trust Bar

Designed to give you the freedom to tighten up wherever you are.  This is a tool that  is nice-to-have on hand.  All parts fit inside tool for compact storage in a pocket or Kite bag. 

Duotone Item No. 44900-8175

Leader lines for  Click Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Click Bar

Duotone Item No. 44900-8141

Hopper with Velcro and Plastic Part(SS08-SS22)

 

Compatibalility:

 

SS13-SS22 Duotone / North Trust Bar

Duotone Item No. 44900-8160

Spare Red Safety Line (SS16-22)

Compatibalility:
2016-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8134

Depower Line & Duotone allen key (SS13-SS22)

Compatibalility:
2013-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8177

Suicide Ring III Trust Bar (SS17-SS21)

Compatibalility:
2019-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8159

Strong Middle Line (SS15-22)

Compatibalility:
2015-2022 Duotone / North Trust Bar

Duotone Item No. 44230-8147

Center Part Insert & Grub Screw (SS14-22) (2pcs)

2014-2025 Duotone / North Trust Bar

Center Part Pin Screws For Click Bar (SS17-SS22)

Duotone Item No. 44900-8178

Center Part Metal Plates For Click Bar (SS17-SS22)

Duotone Item No. 44900-8183

Duotone Item No. 44900-8135

Vario Cleat & pulley (SS13-SS22)

 

Compatibalility:

 

SS13-SS22 Duotone / North Trust Bar

Duotone Item No. 44900-8168

Front Line Connector Pigtail Trust(SS18-SS22)

 

Compatibalility:
2018-2022 Duotone / North Trust Bar

 

North Navigator Landing Line / Flagout Line

Top quality, German-made, extremely high wear Dyneema replacement trim line for the Navigator Control System.

Includes Line, Stopper ball and swivel.

North Kiteboarding replacement Power Bracket for Navigator control system.

North Navigator Trim Handle and Stopper Ball

Replacement for North Navigator Trim Handle and Stopper Ball

* stopper ball does not include set screw

Slingshot Sentry Bar Flagging Line
This product contains all the parts needed to replace your flagging line on your Sentry bar V1 and V1.1

Package Includes:
One replacement elastic flagging line and one T-Bar stainless steel ring.

Sentry Quick Release Small Loop / Surf Slider

The Sentry Quick Release Small Loop is a smaller chicken loop with a metal trimming that will provide maximum performance when used with a sliding rope harness.

The shorter loop will ensure maximum range of depower throw as well as more durability and lifespan of your harness rope.

This smaller loop maximizes your sliding rope harness by bringing your control bar closer to you for a better range of motion while also reducing the wear on your harness line.

This smaller loop maximizes your sliding rope harness by bringing your control bar closer to you for a better range of motion while also reducing the wear on your harness line.

More Performance and More Durability.

Core Sensor 2/2S Pro Chicken Chicken Loop Replacement

For; ROTOR  Quickrelease length 35cm

Core Sensor 3 Chickenstick / Lock Tube - Standrad / Small

Replacement for Core Sensor 3 Bar

Replacement Chicken Loop and Finger(lock Tube) for Naish Naish Torque Bar

Replacement Chicken Loop and Finger (lock Tube) for Naish Base Bar or Naish Torque Bar

OEM Factory Naish Depower trimline for Torque Bar, ATB (Above the bar) bar system. High strength Spectra Line.

Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.

Naish Line Organizer and swivel. Great for custom bar builds! This is where the center lines connect to the bar. Works as a trimmer bracket for depower line.

Replacement Naish OEM Pulley Bridle Line. This is a replacement for the small section of bridle line that the slider ring slides on for Naish Kites.

Includes 1 Pulley Line and 2 stopper balls

Sold Individualy

Cabrinha - Lower Landing SLF Line - Trimlite(TLC)
Trimlite Part - K9PCLNSLF000TLC

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Trimlite Control System

Lower Landing SLF Line - Recoil(RCL)
Recoil Part - K9PCLNSLF000RCL

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System

Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.

The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Race and Foil Race Control Bars V4 Click-In Loop.

Replacement Blue Trim line for the Ozone Race Bar depower system

Replacement Bar End Bungees for Ozone V4 Control Bars. - Set Of Two

PKS Slider Option for Ozone Alpha

This is a system designed by Jeff Howard to change the Ozone Alpha bridle system from a static bridle to a sliding bridle. Made with Ronstan Low Friction Shock Blocks and Spectra Line, the PKS Slider option for the Ozone Alpha will make make the kite smoother in turns by changing the turn radius of the kite and allowing the leading edge to ease into direction changes. By installing the slider option, you can reduce bar pressure, maintain power and control, and smooth the overall feel of the kite.

The Naish fixed stopper ball tightens on to the chicken loop line above the bar to stop you from depowering the kite too much. Requires a hex wrench to tighten.

North Navigator Center System Rebuild - Complete Kit

A Center System rebuild kit for the North Navigator bar that includes all th eparts you need to make you bar new again!

Includes:

• Elasticised Trim Line
• Trim Handle & Stopper Ball
• Power Bracket
• Cleat Kit
• Depower Main Line complete with Tubing
• Landing Line with swivel

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.

Core Sensor 3 and 3 Pro Bar Adjuster Rope
Sensor 3 and 3 Pro Bar Adjuster Cleat
Replacement control bar Adjuster Rope and Stopper Ball for Sensor 3 and Sensor 3 Pro control bars.

*Not compatible with Sensor 2 or Sensor 3S