Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
The kite repair kit by FixMyKite.com includes everything you need to do an emergency repair. This kit is essential for any kiteboard trip.
NEW LOWER PRICETuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under any load then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available
Crazyfly Quick-Release with Chickenloop is the stock part that comes with all 2018 Sick Bars. Though very similar looking to the 2014, the inner mechanics were changed to be easier to put back together once released. The built in swivel and smooth-release make this one of the cleanest and most simple systems on the market.
Replacment trim/depower rope for sentinel bar system.
The PKS Replacement Ozone Speed System is the interface between the fly lines and the bridle of the kite. This speed system works on all Ozone depowerable foil kites since 2009 including the Access, Frenzy, Manta, Summit, Blizzard, Subzero, Chrono, R1 , and Hyperlink. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span.
With the PKS Replacment Speed System, you get the option to order Lines only or complete with the pullies.
The new PKS Universal Pigtail V3 is the newest pigtail from PKS Distribution for a universal connection between kite and bar. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines or directly to the bridles on the kite and you're all set to connect to the loop or knot on the other side, making a nearly kook-proof connection point.
The pigtails are 6 inches in length, made from Spectra leader line, and come as a set of 4: 1x red, 2x grey, and 1x blue. V3 Changes: Double Overhand Knot compared to figure 8 on v2 Full length uniform splice 100% Made In USA
Don't forget to always check kite's pigtails for wear and tear.
These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.
Designed to give you the freedom to tighten up wherever you are. This is a tool that is nice-to-have on hand. All parts fit inside tool for compact storage in a pocket or Kite bag.
Duotone Item No. 44900-8141
Hopper with Velcro and Plastic Part(SS08-SS22)
Compatibalility:
SS13-SS22 Duotone / North Trust Bar
Duotone Item No. 44900-8160 Spare Red Safety Line (SS16-22) Compatibalility: 2016-2022 Duotone / North Trust Bar
Duotone Item No. 44900-8159 Strong Middle Line (SS15-22) Compatibalility: 2015-2022 Duotone / North Trust Bar
Duotone Item No. 44230-8147 Center Part Insert & Grub Screw (SS14-22) (2pcs) 2014-2025 Duotone / North Trust Bar
Duotone Item No. 44900-8135
Vario Cleat & pulley (SS13-SS22)
Duotone Item No. 44900-8168
Front Line Connector Pigtail Trust(SS18-SS22)
Compatibalility: 2018-2022 Duotone / North Trust Bar
North Navigator Elasticised Trim Line
Core Sensor 3 Chicken Loop Small / Standard The small loop comes standard on the Sensor 3 and is designed for freeriders and freestylers who mostly ride hooked. The smaller loop size lowers the adjuster height, which benefits shorter riders. An elasticized chicken stick is easily manipulated to make hooking in faster. After hooking in, the chicken stick can be passed through the harness hook to avoid unintentional unhooking.
Replacement Chicken Loop and Finger(lock Tube) for Naish Naish Torque Bar
Replacement ATB (Above The Bar Trim) Naish Torque Loop Chicken Loop, Complete.
OEM Factory Naish Depower trimline for Torque Bar, BTB (Below the bar) and Base bar system. High strength Spectra Line, stopper ball and expert riders leash connection.
Naish Line Organizer and swivel. Great for custom bar builds! This is where the center lines connect to the bar. Works as a trimmer bracket for depower line.
Replacement Naish OEM Pulley Bridle Line and Slider set for a complete Bridle refresh. This is a replacement for the small section of bridle line and the slider ring slides for Naish Kites. Includes 2 Pulley Line and 4 stopper balls, and 2 Slider Rind w/pigtails.
Part - K2PCTLKITSTDXXX Includes:
Lower Landing SLF Line - Recoil(RCL) Recoil Part - K9PCLNSLF000RCL 1x Elasticized Landing Line; Lower section of 1X SLF Front Line. Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System
Replacement Ozone Megatron Chickenloop V4 Click-In Loop assembly. This part includes the push-away release system, harness loop, medium lock tube, and PU-covered Amsteel depower line. The chickenloop works as a replacement for Contact Bars Water, Foil Freeride, Race, and Foil Race V4 bars.
he Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4 Click-In Loop.
Replacement Blue Trim line for the Ozone Race Bar depower system
Crazyfly Savvy Control Bar
This bar is Savvy. Smart, intelligent, safe, functional, durable, and sustainable. A bar that sticks with you for many sessions but does not stick when sheeting and looping. The new quick release clicks and all on the bar ticks. Ticks all the boxes a bar should. Complex yet simple. Renewable in matter of minutes. A bar to hold and behold. Savvy? At a glance:
PKS Bridle Slider / Sheaveless Pulley is only 2.1cm long, yet it is very strong, super lightweight, and designed for performance.
A Center System rebuild kit for the North Navigator bar that includes all th eparts you need to make you bar new again! Includes:
Fix My Wing Bladders
Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.
The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.
To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.
Core Sensor 3 and 3 Pro Bar Adjuster Rope Sensor 3 and 3 Pro Bar Adjuster Cleat Replacement control bar Adjuster Rope and Stopper Ball for Sensor 3 and Sensor 3 Pro control bars. *Not compatible with Sensor 2 or Sensor 3S
The 9mm Self-Stick-Valve is a very common inflate valve used for years. this one way valve can be easily converted into a 2 way valve if desired.
A Sewing Awl works great for harness repair or even to fix a busted footsrap. Can sew through thick tough material and make a fast, durable repair. This has saved us on trips after a harness blew out from one too many uses.
The Ozone Contact Bar Flag Out Ring with Swivel works on all Ozone snow and water kites for 2014+ model year. This ring is attached to the base of the flag our bungee that runs through the chickenloop.
Cabrinha Flagout Swivel
Designed to bring out the kiter within everyone, the Ignition 3-line trainer kite is smooth and stable with steady response and power to ensure easy progression into all kite sports. The Ignition V3 features our market leading Internal Landing and Re-Launch System - this unique system combined with the Wrist Leash gives you the ability to safely land the kite by yourself and guarantees easy re-launch. If you feel too much power or are ever unsure all you have to do is let go of the bar, the kite will land automatically with minimal power until you are ready to re-launch.
PKS Stainless steel flag out rings are useful replacements in many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.
With the Fixmykite.com Sleeve Kit you can easily replace your sleeved ends or shorten your fly lines and re-sleeve them anywhere you are to get you back on the water in no time.
The 11mm Deflate (Dump) Self-Stick Kiteboarding-Valve is used on most kites as the deflation system.
This kit includes micro braiding tool, instructions and pigtail extender. With these tools you can quickly fix a braided Spectra fly line on the spot. Splicing Needle
This kit is an absolute no brainer to have in your bag. There is no excuse not to have this kit, because it has all the essentials in standard kite repair. Eliminate excuses and stay on the water with this fix kit.
NEW LOWER PRICE! Tuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available.
The new XL PKS Adjustable Universal Pigtail is the latest and greatest pigtail for a universal connection between kite and bar. These pigtails are similar to our classic universal pigtail, but are made extra-long and feature a moveable figure-8 knot to allow for adjusting the pigtail length. This is great if your lines settle to different lengths and you need to tune them to get them to be all the same length.
Developed in conjunction with Robline, a worldwide leader in technological watersports line manufacturing, and manufactured from Dyneema SK 99 fiber, comes the new PKS Elite 99 Lines. The PKS Elite 99 lines are a high strength, low stretch kite line. Pre-Loaded lines for a more consistent and responsive feel from kite to bar. This lets you have a greater sense of where the kite is and what it is doing even on a kite with lighter bar pressure. Utilizing an enhanced impregnation and coating process and using a stabilized UV and abrasion resistant protective coating, the lines maintain their consistent and responsive feel for many years of use throughout their life.
The Ozone Contact Water Freeride Control Bar is Ozone's latest control bar featuring brand new soft-bar ends, a push-away release system, and an above-the-bar clamcleat depower system. The Ozone bar is the cleanest control bar on the market.
A clean and simple design, the Ozone Contact Water Freeride Control Bar features an easy-to-use trim system and features our latest innovation - the Ozone Megatron Click-In Loop. The Ozone bar is the cleanest control bar on the market.
The innovative Ozone Megatron Click-In Loop is an all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand; it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply 'clicking' in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
What's the first thing you do when you get in a car? You click in your seatbelt, hearing that 'click' sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our new release system, the Click-In Loop, is inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.
The Contact Water Control System V4 comes in 38cm, 45cm, 50cm, and 55cm bar lengths and ships standard with a medium size loop.
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Next »
Forgot your password?
Already Registered?
OR
