Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
The Ozone Foil Stall/Brake handle attaches to the 2015+ Contact Water and Contact Race Control bars to convert the bar to Foil Freeride and Foil Race bars. The brake strap attaches around the relaunch balls with a bungee to the steering leader lines. These stall handles come standard on all Ozone snowkites/foils.
Ozone line extensions are made to be used with all Ozone water kites and the Ozone Contact Water, C4, or Race Control Bars. Adding extensions to your lines can give your kite that extra height to find some cleaner wind and also give you a bit more power for those lighter days.
Ozone Race v2 Fly Line Extensions (2 x 300 kg & 2 x 200 kg) Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even-length lines are compatible with any Ozone Contact Water Freeride, Race bar, and many other bars on the market.
The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.
These extensions are made from Ozone race lines which are made from the highest quality, pre-stretched Dyneema available.
Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.
All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory Features:
Ozone Ignition Trainer line sets made to be used with the Ozone Ignition 3-line trainer kite. These lines also perfect as replacement lines for any 3-line kite or trainer.
The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.
12m + 10m Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Shorter 8m + 2m line extensions are also available as an accessory for those wanting 18m or 20m lines for wave riding or tighter kiteloops.
Dacron Tape should be used to repair all cuts in the leading edge and stuts of a inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
CrazyFly really outdid themselves with this year's kite pump. It boasts many new features, most note worthy being the addition of a valve which controls pressure and capacity. When closed, the pump moves air on both the up and down stroke for high capacity and when the cap is open is only moves air on the down stroke for high pressure pumping.
Didn't pumping your kite go fast enough? Then you need the Duotone Kite Pump XL. The XL version of the kite pump has more volume so you need less pumps to fill your kite! Just like the standard version of the Duotone kite pump, the XL also has a double action and a single action stand. Start pumping up your kite in the double action stand and do the last few pumps with the single action stand so that you can pump up your kite as hard as you want for higher pressure. The pump is equipped with a good pressure gauge so you always know if your kite is hard enough. The Duotone Kite pump XL can be used to inflate kites with the valves of Duotone and North but also boston valves like those on Naish, Cabrinha and Core. Features
The New PKS Universal V2 Valve adapter for Naish, Flysurfer, F-One, Core kites. Works with Reactor Valve, Speed 2.0 Valve, Free Flow Valve and Surelock Valves.
This big Boston valve (screw valve) pump adapter / nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), Naish, Crazyfly, Airush (2015 and newer,) and Switch kites.
This threaded big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer), and Switch kites. This adapter screws onto the top of the Boston valve for a more secure fit compared to the friction-fit adapters typically found on most pumps.
The North and Core Pump Adapter/Nozzle is compatible with Core kites and newer North kites (2013 and on), Duotone kites, and Cabrinha Airlock 2 kites.
The North/Duotone Airport Pump Adapter/Nozzle with silicone sealing ring is compatible with 2013 and newer North kites, and 2014 and newer Cabrinha kites with the Airlock 2 screw valve.
This adapter was built to fit newer model heavy duty pump hoses (2016 and newer.) The adapter does also fit older model pump hoses (prior to 2016) very tightly but does not lock in like standard OEM adapters. The adapter can be used as is or may need to be modified by filing down the tiny nub near the ridge of the adapter where it connects to the hose.
The PKS North/Duotone Airport Pump Adapter/Nozzle with silicone sealing ring is compatible with 2013 and newer North kites, and 2014 and newer Cabrinha kites with the Airlock 2 screw valve.
With only a few exceptions, the PKS HD Premium Pump Hose will fit most any Kite/SUP pump out there (new and old) and is heavy-duty, flexible, and kink-resistant. The MALE end of the hose attaches to the pump while the FEMALE end attaches pump adapters/nozzles.
Before now, hoses have not been sold separately. Manufacturers would rather sell complete new pumps rather than a replacement hose. Most kite pump hoses are not super-duty and crimp, kink, or crack over time, but now you can replace them easily and at a fantastic price. This is the same hose on the PKS Pro Flow V2 AND v3 Kite Pump.
The PKS HD Replacement Pump Hose will fit on most kite brands* new and old pumps including Airush, Best, Blade, Cabrinha, Crazyfly, Epic, F-One, Flexifoil, Liquid Force, Naish, North, Ozone, Slingshot, Wainman, and more. *Note: This replacement hose will NOT fit on the old PKS PowerFlow Pump or the new WMFG.
2" Wide (Two-inch Wide) Dacron Tape should be used to repair all cuts in the leading edge and struts of an inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
Dacron Tape should be used to repair all cuts in the leading edge and struts of an inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
Tear Aid Bladder patches are the BEST patch out there to seal leaks and small cuts in bladders. The roll can be cut into any size desired for patching, whether your bladder problem is small pinholes or 2-foot long cuts. 30 ft. x 1.25-Inch or 3-Inch or 6-inch Rolls (60 patches). Note that long cuts (more than 6 inches) or cuts next to the seam of bladder can be harder to ensure a good seal on. Long cuts are rarely straight lines.
Designed to be used with Wing leashes for a quick connect and removal from one wing to another. No need to have a leash for every wing, just easily move your leash from wing to wing using the Quick Connect pigtail with stopper ball. The Quick Connect Pigtail set allows you to have a much larger stopper to ensure that the connection is sure to hold.
The Connect Wing harness The Connect Wing Harness V1 makes riding longer distances a real pleasure, giving you time to relax your arms and maximise your session. The slim-line lightweight design offers ultimate freedom of movement when unhooked with support to hook in, lean back and cruise when you want. The Connect Wing harness has been designed to comfortably slide on skin and neoprene. It can easily be rotated around your waist when lying on a board to paddle, keeping the hook away from the board and avoiding damage. An open angle Spreader Bar hook allows easy hooking in and out. The wings Leash Line can be connected directly to the harness with or without our optional Quick Release, in this case the Wrist Strap or Waist Strap is not required. We highly recommend using the Quick Release if connecting the Leash Line directly to the harness.
Ozone Wing Waist Strap and Wing Leash Line
Complete Ozone Waist Leash for Ozone WASP or any other wing.
Replacement Ozone WASP V2 Leash Line. Does not include waist or wrist strap. Includes swivel to prevent tangles. Can be used on most wings
Sizes:
Harness line for WASP V2. Wing foiling harness line to help relieve stress on your arms, improve posture and upwind angles. The Ozone harness line is adjustable using the knot system at the end of the rope to adapt to your reach.
Ozone Wing Leash Quick Release. Does not include waist strap, wrist strap, or leash line. Includes the Quick Release only.
Ozone WASP Wrist Strap (strap only, no leash line)
Replacement Wrist Strap for use with the Ozone WASP, does not include the leash line.
Ozone Wing Waist Strap (strap only, no leash line)
Replacement Waist Strap for use with the Ozone WASP or any other wing, does not include the leash line.
Tear Aid Bladder patches seal leaks and small cuts in bladders, the perfect repair material for bladder blowouts. These patches are self stick (peel & stick) and can be used to patch any bladder material or color. The specially formulated adhesive is incredibly durable making for a quick repair. Patches can be used on leading edge or strut bladders and sail materials.
PKS replacement hose clamps for kites with standard 1/4" ID one pump hose.
Fixmykite.com again brings you the latest and greatest kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.
Fixmykite.com again brings you the latest and greatest kit to keep you kiting longer. This Pinhole patch kit includes 3 different materials for patching any part of your kite! Tear Aid patches that cover a multitude of repairs and are used mainly for pinhole leaks in bladders. Dacron patches for covering scrapes and pinholes in the Leading edge or struts. Ripstop sail tape to repair a slice or tear on your sail. You can find so many uses for this kit it will blow your mind! All patches are cut into circles so there are no pointy corners to prevent peeling up on you. Includes:
PKS Double-sided Seaming Tape is ideal for Kite repairs, along edges that have to be closed, Leading Edges, Trailing edges, strut, etc., and is suitable on foil kites and Inflatable kites. Sold by the ROLL only, 1/4" (6mm) x 72 yards (65.8 meters).
All your kite repair needs in a nice package with a nice price!
FixMyKite Fix Kit, One-pump Hose and zip ties, Ripstop Sail Tape, Kook-Proof Pigtails, and the TearAid 2-Pack.
Seam Grip goes beyond seam sealing and patching holes. It waterproofs tents, improves traction, and offers abrasion resistance, too. It works on all types of fabrics, including nylon, vinyl, neoprene, PVC, rubber, and leather. So take a tube of Seam Grip wherever you go, because you never know when gear will rip, leak or fall apart. Save your gear?and your adventure?with the award-winning Seam Grip waterproof seam sealer.
Aquaseal, Urethane Repair Adhesive & Sealant. The industry standard for maximum strength repairs to wet suits, dry suits and all water sports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses.
Glufix is the only adhesive specially conceived for kitesurfing equipment. Ultra resistant and flexible, Glufix will allow you to make permanent and durable repairs on your kitesurf equipment. Used with Fiberfix, one Glufix tube can allow you to repair a tear as long as 4’ long!
PKS replacement hose clamps for kites with larger 3/8" ID one pump hose.
Iron-on repair fabric. Provides strong, flexible, permanent repairs for neoprene. Lined with Barritex™ for extra abrasion resistance. Iron Mend may be used to repair neoprene dry suits, wet suits, waders, neoprene gloves and boots, orthopedic supports, and lycra body suits. Includes: 10" x 6" Knee-Pad Patch, Reusable Heat Shielding and Detailed Instructions.
OEM Ozone High Volume One Pump Hose
Hose is sold by the foot so you can cut it to your specific needs. For more than one foot, just up the quantity when ordering. hose will be sent in 1 continous length of hose. This hose works on the Ozone High Volume valves as well as Airush SPS valves (2008 and newer) and Gaastra valves.
Cabrinha sprint tubing collar set of 5 or 10. Works on sprint valves from 2010-2015.
Cabrinha Flyline Stopper
Ozone 2 Mega Valve Replacement Kit
Theis is a 2 valve kite thatincludes one pump hose, hose clip and hose collars for replacing the leading adge and the strut valve on an older Ozone kite with the previous generation kite valves.
Includes:
1 - 90 Degree Mega One Pump Valve
1 - Straight Mega One Pump Valve
1 - Hose Clip
2 - Hose clip retainer collars
1 - 9 inch Length of One pump hose
Replacement North 2017 and older Lazy Pump Gen 1 Hose Clamps North/Duotone Part: 44500-8038
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Next »
Forgot your password?
Already Registered?
OR
