Crazyfly Quick-Release with Chickenloop is the stock part that comes with all 2018 Sick Bars.  Though very similar looking to the 2014, the inner mechanics were changed to be easier to put back together once released.  The built in swivel and smooth-release make this one of the cleanest and most simple systems on the market.

<strong>SeaSpecs</strong> Non-elastic, Easily Adjustable and Comfortable Secure Strap keeps <strong>SeaSpecs</strong> on your head during your Extreme Surfing, Kite Surfing, Windsurfing, Jet Skiing, Snowboarding and all other Extreme Sports!

This soft zipper case adds extra protection and padding when storing your water shades. It features a hook on one end, as well as two loops on the back, allowing you to attach it to different objects in various ways.

The Ocean Rodeo Go-Joe is everything you need for Leashless board Retrieval assistance: Even stronger, better, lighter, and easier to use than before. A great idea and an innovative product that is moving from beginners to wave riders and mainstream users. If you don't have one it's worth to check it out.

The Oceanus Eel Reel Leash...if you're gonna use a board leash...this is the only choice!

The retractable Oceanus EEL Quick-Release Leash is the latest and most versatile model of reel leash. This Quick Release version allows you to take it off your harness easily and leave it connected to your board.

The Oceanus SUP Flat Water REEL Ankle Mount Leash provides a low-profile, straight-line feed from the ankle to the board leash plug. This model may be worn on the ankle, waist belt, or personal floatation device and the leash extends to clip onto the board leash plug.

The Oceanus Replacement Leash is a Nylon leash with straps stitched at both ends and rated at 460 pounds. This leash is a replacement for the reel part of the leash that fits inside the plastic housing.

The Oceanus Reel Leash Rope extension is approximately 30 inches long, 1/4 inch diameter rope doubled over, stitched, glued, and rubberized.  This rope extension goes between the webbing attachment on the board and the spring-loaded hook of the reel leash.

The Oceanus Shock Cord is an alternate attachment to the standard rope extension, and comes with a webbing attachment. The webbing attachment affixes to your board fin-screw area, then you can attach either the standard rope extension or the shock cord.  The Shock Cord is shorter and has elastic bungee.

The Oceanus Snap hook replacement is available in case yours wears out. These solid Stainless Steel trigger snap clips are rated at 270 pounds of load, have a bottom swivel, and spring "trigger" snap close.

The Oceanus Webbing Attachment is the part that attaches to the fin box or  fin screws of the board. The Oceanus Reel Leashes come with this part, but if yours is looking worn out, it may be time to replace it.

Replacment trim/depower rope for sentinel bar system.

Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.

Ozone trimmer handle for V4 or older

Black multi-bore PU tubing with top funnel, 4mm Dynema mainline, split top Spinning Handle. For 2017 or newer

2019 Mystic Kite Safety Leash - Short

Features

•  45cm length (unstretched)

•  Soft touch, lightweight material

•  Compact carabiner

•  Neoprene carabiner cover

•  Designed for freeride / wave performance

2019 Mystic Kite Safety Leash - Long

Features

•  110cm length (unstretched)
•  Soft touch, lightweight material
•  Compact carabiner
•  Neoprene carabiner cover
•  Designed for freeride / allround performance

Length = 43 inches (110cm)

The PKS Replacement Ozone Speed System is the interface between the fly lines and the bridle of the kite. This speed system works on all Ozone depowerable foil kites since 2009 including the Access, Frenzy, Manta, Summit, Blizzard, Subzero, Chrono, R1 , and Hyperlink. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span.

With the PKS Replacment Speed System, you get the option to order Lines only or complete with the pullies.

The Ozone Contact Bar Flag Out Ring Cone..

Mystic Stealth Bar Kite and Stealth Bar Surf

PKS KISS Loop V2 - Replacement Line with T-Pin

This is a replacement Kiss loop Line only, with the T-Pin to replace your center line.

Includes

• KISS Loop line with T-Pin

Core Sensor 3 Chicken Loop Small / Standard

The small loop comes standard on the Sensor 3 and is designed for freeriders and freestylers who mostly ride hooked. The smaller loop size lowers the adjuster height, which benefits shorter riders. An elasticized chicken stick is easily manipulated to make hooking in faster. After hooking in, the chicken stick can be passed through the harness hook to avoid unintentional unhooking.

Core Sensor 3 Chickenstick / Lock Tube - Standrad / Small

Replacement for Core Sensor 3 Bar

Core Sensor 2/2S Pro Chicken Chicken Loop Replacement - Short

For; ROTOR  Quickrelease length 22cm

Replacement Sensor Bar Safety Line

For Sensor 2s and Sensor 3

Replacement Chicken Loop and Finger(lock Tube) for Naish Naish Torque Bar

Replacement Chicken Loop and Finger (lock Tube) for Naish Base Bar or Naish Torque Bar

Replacement ATB (Above The Bar Trim) Naish Torque Loop Chicken Loop, Complete.

Replacement BTB (Below The Bar) Naish Torque  Loop Chicken Loop, Complete.

OEM Factory Naish Depower trimline for Torque Bar, ATB (Above the bar) bar system. High strength Spectra Line.

OEM Factory Naish Depower trimline for Torque Bar, BTB (Below the bar) and Base bar system. High strength Spectra Line, stopper ball and expert riders leash connection.

Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.

Naish Line Organizer and swivel. Great for custom bar builds! This is where the center lines connect to the bar. Works as a trimmer bracket for depower line.

Replacement Naish OEM Pulley Bridle Line. This is a replacement for the small section of bridle line that the slider ring slides on for Naish Kites.

Includes 1 Pulley Line and 2 stopper balls

Sold Individualy

Replacement Naish OEM Pulley Bridle Line and Slider set for a complete Bridle refresh. This is a replacement for the small section of bridle line and the slider ring slides for Naish Kites.

Includes 2 Pulley Line and 4 stopper balls, and 2 Slider Rind w/pigtails.

Cabrinha Trimlite Trim Line Replacement

Part- KS7TLLINE000STD
1x TrimLite Line for use on TrimLite Cleat. Includes Elastic cored line.

Lower Landing SLF Line - Recoil(RCL)
Recoil Part - K9PCLNSLF000RCL

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System

Replacement bladders for 2014 and V8 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for  V9 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for  V10 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Enduro V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Enduro V2 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

Replacement bladders for Ozone Enduro V3 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.

If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.

The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Race and Foil Race Control Bars V4 Click-In Loop.

Replacement Blue Trim line for the Ozone Race Bar depower system

PKS Stainless steel trimmer bracket / line organizer is a good replacement for many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 

Includes:

• Trimmer bracket
• Mini Stopper Pigtail

Replacement Bar End Bungees for Ozone V4 Control Bars. - Set Of Two

Duotone Item No. 44900-8154

Metal Ring (SS08-onw)

Compatibalility:

SS08-onw

Duotone / North Trust Bar