The Ozone Contact Bar Flag Out Bungee for Contact V4 Foil And Water Contact Bar

The Ozone Contact Bar Flag Out Bungee for Race and Foil Race V4 Bar

Spare Flag out line

2013 (plastic bar ends, PUSH Megatron chicken loop)

V1 (soft bar ends, PUSH Megatron chicken loop)

995mm (1320mm stretched).

The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 20011-2013 kite models that have the pull release Megatron flag out system.

The Ozone Contact Bar Flag Out Bungee works as a replacement on all Contact water bars for 20011-2013 kite models that have the pull release Megatron flag out system.

Naish Flag Out Line Bungee. Compatible with both Fusion and Universal Systems

The Naish Nylatron Insert with screws is the replaceable insert on all  Naish Control Systems manufactured from 2015 to current (Fusion, Alana,  and Torque).  Made of nylon, the insert dramatically reduces friction and  wear on the trim line; Included screws make this a quick and easy  replacement with a universal key.

The Crazyfly Cleat is their unique cleat for the Trim-line (Sheeting strap) on 2015 kites and newer for the 2015 CrazyFly Sick Bar.

Slingshot trim cleat for 2010 and newer Compstick Guardian. 4mm screws included

The Racer-Back Clamcleat is the most trusted cleat in Kiteboarding and used by many top brands such as Ozone. A lightweight and compact cleat on a rope. Easy to rig and adjust by hand. Amsteel/Chickenloop line can be woven through the back of cleat to secure it in place while the front side with the teeth is used as a depower cleat. The position of the cleat on the line can be adjusted by hand. No tools required.

Standard:

• Line Sizes - 3/16"-1/4"
• Size - 2 7/8" x 5/8"

Micro:

• Line Sizes - 1/8"-5/32"
• Size - 2-3/8" x 1/2"

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.

Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball included

Neoprene Clip covers are used to cover the isolating clips on most one pump inflation systems. These are a great way to protect your kite from damage from the plastic clips. $4.00 each

KiteFix’s best Seller! This repair package contains all you need to make permanent repairs. Hand assembled in Canada with high quality products, KiteFix’s repair kit is a must to be added to your equipment. Includes: 1 Glufix tube (1 oz.), 2 self-adhesive dacron rolls (Black & White, 5’ each.), 7 Fiberfix tapes (4’ each), bladder ultra-adhesive patches (3’’x 7’’), 1 Peel2Fix valve repair system, 1 Talkine bottle (3 oz.), 1 Glufix applicator, 3 tie raps, 1 detailed user’s guide, 1 pair of scissors, 1 plastic bag, 1 kitefix sticker. All put together in an airtight plastic container. (product code: kx-0401)

The mini-kit is our compact and economical package. Includes: 1 Glufix tube (1 oz.), 2 self-adhesive dacron stripes (black & white, 12’’), 1 Fiberfix tape (4’), bladder ultra-adhesive patches (3’’x3 ½”), 1 Glufix applicator, 1 detailed user’s guide, 1 brush, 1 KiteFix sticker.

For ripstop tears from 1'' to 48''

Fiberfix is the reinforcement fiber to be used with Glufix. This self-adhesive fiber increases up to 10 times the resistance of a repair. In order to have a permanent, ultra-resistant, esthetic repair in a record time, you simply have to join the 2 parts of a tear together with the Fiberfix and add a layer of Glufix over it. 7 colors package.
Size: 4’ each
 

These parrel beads are uv stable and impact resistant. Maximum rope diamenter 3/16".

Knotless StopperKnotless Stopper allows you to move the stopper anywhere on the line without undoing a knot. The knotless stopper works with flylines and leader lines. Many uses.

Choose which Airush Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Airush kiteboards from 2013 to the current model year.

Choose which Cabrinha Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Cabrinha kiteboards from 2014 to the current model year.

Crazyfly Kiteboarding Hexa Binding screws and washers. Great replacements if you ever lose a screw on the water or during travel.

Choose which Naish Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Naish kiteboards from 2015 to the current model year.

Stainless steel rings are 1" diameter and are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 1-Inch Diameter

• 1-Inch Outer Diameter
• 3/4- Inch Inner Diameter

Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacment lines.
Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

FMK Bridle Repair Kit

Ripstop sail tape is the best way to repair cuts in the sail of your kite. This Nylon tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.

The Bladder-Patch Install Kit which includes a bladder protection sheet and a 6x6-Inch (15.24 x 15.24cm) Patch. If your screw valve has to be cut out of the old bladder, then you need the Patch Install Kit.

Fixmykite.com again brings you the latest and great kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.

Fixmykite.com again brings you the latest and great kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.

Tylaska Snap Shackle - Trigger Release Shackle

Tylaska T5 Trigger Release Snap Shackles are perfect for kiteboarding and small boat applications requiring immense strength and low weight. They have a breaking strength of 5,000 pounds and weigh just 2.2 ounces in the standard bail configuration.

Features:

•     17-4 PH Stainless Steel
•     5000 lb breaking strength
•     2.2 oz (59 g)
•     Highly Polished Stainless Finish

The Ozone Foil Stall/Brake handle attaches to the 2015+ Contact Water and Contact Race Control bars to convert the bar to Foil Freeride and Foil Race bars. The brake strap attaches around the relaunch balls with a bungee to the steering leader lines. These stall handles come standard on all Ozone snowkites/foils.

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.

Ozone V2 Fly Line Extensions

All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory

Features:

• Long lasting low stretch lines
• Color coded and numbered

Specs:

• Front Lines: 500kg breaking strength, 2.2mm diameter.
• Back Lines: 300kg breaking strength, 0.9mm diameter.

Includes:

• 2 - 500kg Front Lines
• 2 - 300kg Back Lines
• Line Winder

Ozone Race v2 Fly Line Extensions (2 x 300 kg & 2 x 200 kg)

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even-length lines are compatible with any Ozone Contact Water Freeride, Race bar, and many other bars on the market.

The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.

These extensions are made from Ozone race lines which are made from the highest quality, pre-stretched Dyneema available.

• High performance, low drag
• Colour-coded
• 300kg front lines, 200kg back lines

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.

Ozone V2 Fly Line Set

All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory

Features:

•     Long lasting low stretch lines
•     Colour coded and numbered
•     In-line stopper ball

Ozone Ignition Trainer line sets made to be used with the Ozone Ignition 3-line trainer kite. These lines also perfect as replacement lines for any 3-line kite or trainer.

PKS Trainer Kite Lines fly above the rest.  PKS trainer lines are 200 lbs. white lines for high-visibility, and made from Pre-stretched Spectra to several lengths to fit your Custom needs.  Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there.  

The PKS MINI Slider-Release Leash is fully releasable under load, and has removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. MINI length = 22 inches (55cm)

The PKS Slider Handle Pass Leash is fully releasable under load by pushing the soft foam handle, and have removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. Length = 46 inches (115cm)

2019 Dakine Kite Leash Shorty. Short leash with standard push away release. If you like minimal and functional, this is the leash for you. Clean, simple, and easy to use if you ever need it.

• Stainless steel carabiner with padded cover
• 1/4" (6.5MM) highest quality urethane Dura-Cord for
• maximum strength
• Molded Opti-Flex Leash ends for maximum durability
• Push away disconnect attachment