The kite repair kit by FixMyKite.com includes everything you need to do an emergency repair. This kit is essential for any kiteboard trip.

Always check pulleys for wear and tear and replace when needed. A broken or jamed pulley can ruin a kite bridle. $8.25 per pulley

NEW LOWER PRICETuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under any load then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available

<p><br />
Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.</p>

Australia water shades are surf polarized sunglasses designed by Ocean for the water lovers.&nbsp; Ocean has developed these surf polarized sunglasses focusing on the most extreme conditions.&nbsp; They have ATOM system polarized lenses which reduce the harmful effects of the suns rays reflecting on the water.&nbsp; The glasses do float thanks to the frames.&nbsp; Additional float included for added protection.&nbsp; <br />

<p>Designed to offer style and functionality. The  CUMBUCO by OCEAN Sunglasses has everything that any water sports lover  would wish for; Polarized lens  with ATOM system which provides  safety. Coating-water repellent and Anti-impact protection.&nbsp; Features a polycarbonate material for a light yet durable product.</p>

This soft zipper case adds extra protection and padding when storing your water shades. It features a hook on one end, as well as two loops on the back, allowing you to attach it to different objects in various ways.

The HitchSafe makes any kiteboarders or surfers life easier. Figuring out what to do with the keys before going surfing or kiteboarding can be a big pain but we finally found a good, affordable solution that only takes a couple minutes to install.

The Hitchsafe replacement cover is made to look like any normal hitch cover, but covers the Hitchsafe stored in the hitch of your truck including your keys and valuables.

The Hitchsafe Extender Pins are for 2005-2023 Toyota Tacoma and the 2007-2023 Tundra OEM hitch receivers.

The new PKS Universal Pigtail V3 is the newest pigtail from PKS Distribution for a universal connection between kite and bar. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines or directly to the bridles on the kite and you're all set to connect to the loop or knot on the other side, making a nearly kook-proof connection point.

The pigtails are 6 inches in length, made from Spectra leader line, and come as a set of 4: 1x red, 2x grey, and 1x blue.

V3 Changes:
Double Overhand Knot compared to figure 8 on v2
Full length uniform splice
100% Made In USA

Don't forget to always check kite's pigtails for wear and tear.

Repair for the Megatron II Medium Chicken Loop Hrness Loop repair kit.


Follow this link for a how-to!!

https://www.youtube.com/embed/il6kxXJsdUQ

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and includes the extra PU tube for a tight fit.

These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.

Duotone Item No. 44220-8136
Sliding Stopper for Trust Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Trust Bar

Designed to give you the freedom to tighten up wherever you are.  This is a tool that  is nice-to-have on hand.  All parts fit inside tool for compact storage in a pocket or Kite bag. 

Designed to give you the freedom to tighten up wherever you are.  This is a tool that  is nice-to-have on hand.  All parts fit inside tool for compact storage in a pocket or Kite bag. 

Adaptive Leash Eye 2.0

Safety first! With the Adaptive Leash Eye you can attach your safety leash to the front webbing of your harness, which is the safest position since it is always within reach when things go south.

Material:

• Plastic overmoulded stainless steel

Replacement slider rope for 2019 Mystic Stealth bar

Replacement slider rope for 2019 Mystic Stealth bar

Stealth Bar Surf Rope Slider Conversion Kit

Conversion kit to change you Mystic Stealth Bar with a Kite Hook to a Surf Slider. Includes everything needed.

Includes:

• Slider Bar
• Short Fixed Rope
• Long Slider Rope and Locking Washer
• Slider Ring
• Mounting Screws

Duotone Item No. 44900-8175

Leader lines for  Click Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Click Bar

Duotone Item No. 44900-8141

Hopper with Velcro and Plastic Part(SS08-SS22)

Compatibalility:

SS13-SS22 Duotone / North Trust Bar

Duotone Item No. 44900-8134

Depower Line & Duotone allen key (SS13-SS22)

Compatibalility:
2013-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8177

Suicide Ring III Trust Bar (SS17-SS21)

Compatibalility:
2019-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8159

Strong Middle Line (SS15-22)

Compatibalility:
2015-2022 Duotone / North Trust Bar

Duotone Item No. 44210-8107

Red Safety Line for Click Bar (SS18-22)

Compatibalility:
2018-2022 Duotone / North Click Bar

Duotone Item No. 44230-8147

Center Part Insert & Grub Screw (SS14-22) (2pcs)

2014-2025 Duotone / North Trust Bar

Center Part Pin Screws For Click Bar (SS17-SS22)

Duotone Item No. 44900-8178

Center Part Metal Plates For Click Bar (SS17-SS22)

Duotone Item No. 44900-8183

Duotone Item No. 44900-8135

Vario Cleat & pulley (SS13-SS22)

Compatibalility:

SS13-SS22 Duotone / North Trust Bar

Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.

Replacement Naish OEM Pulley Bridle Line and Slider set for a complete Bridle refresh. This is a replacement for the small section of bridle line and the slider ring slides for Naish Kites.

Includes 2 Pulley Line and 4 stopper balls, and 2 Slider Rind w/pigtails.

Cabrinha - Lower Landing SLF Line - Trimlite(TLC)
Trimlite Part - K9PCLNSLF000TLC

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Trimlite Control System

Lower Landing SLF Line - Recoil(RCL)
Recoil Part - K9PCLNSLF000RCL

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System

Cloud Kites Control System Rebuild / Upgrade

Are your Cloud Kite control system center lines showing more wear than you like? Ship your Cloud Kites control system to us and we will rebuild your center line system with new lines using your existing hardware.

This for the center lines only. If you want a complete system built on a KISS Bar, we can do that too

Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.

North Navigator Center System Rebuild - Complete Kit

A Center System rebuild kit for the North Navigator bar that includes all th eparts you need to make you bar new again!

Includes:

• Elasticised Trim Line
• Trim Handle & Stopper Ball
• Power Bracket
• Cleat Kit
• Depower Main Line complete with Tubing
• Landing Line with swivel

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.

Core Sensor 3 and 3 Pro Bar Adjuster Rope
Sensor 3 and 3 Pro Bar Adjuster Cleat
Replacement control bar Adjuster Rope and Stopper Ball for Sensor 3 and Sensor 3 Pro control bars.

*Not compatible with Sensor 2 or Sensor 3S

The 9mm Self-Stick-Valve is a very common inflate valve used for years.  this one way valve can be easily converted into a 2 way valve if desired. 

A Sewing Awl works great for harness repair or even to fix a busted footsrap. Can sew through thick tough material and make a fast, durable repair. This has saved us on trips after a harness blew out from one too many uses.

The Ozone Contact Bar Flag Out Ring with Swivel works on all Ozone snow and water kites for 2014+ model year. This ring is attached to the base of the flag our bungee that runs through the chickenloop.

Cabrinha Flagout Swivel

Ozone Ignition v3 - 3-Line Universal Trainer Kite

Designed to bring out the kiter within everyone, the Ignition 3-line trainer kite is smooth and stable with steady response and power to ensure easy progression into all kite sports.

The Ignition V3 features our market leading Internal Landing and Re-Launch System - this unique system combined with the Wrist Leash gives you the ability to safely land the kite by yourself and guarantees easy re-launch. If you feel too much power or are ever unsure all you have to do is let go of the bar, the kite will land automatically with minimal power until you are ready to re-launch.

PKS Stainless steel flag out rings are useful replacements in many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

PKS Elite 99 Kite Race/ Hydrofil Lines Line

Developed in conjunction with Robline, a worldwide leader in technological watersports line manufacturing, and manufactured from Dyneema SK 99 fiber, comes the new PKS Elite 99 Lines. The PKS Elite 99 lines are a high strength, low stretch kite line. The Line sets are manufactured with spliced and sewn loops. Since we manufacture the line sets in house, you get to choose the line length that meets your specific needs.

Pre-Loaded lines for a more consistant and responsive feel from kite to bar. This lets you have a greater sense of where the kite is and what it is doing even on a kite with lighter bar pressure.

Utilizing an enhanced impregnation and coating process and using a stabalized UV and abrasion resistant protective coating, the lines maintain their consistant and responsive feel for many years of use throughout their life.



Features:

• Using only lightweight lines, the parasitic drag is reduced to minimum ensureing your lines never slow you down in a race or in ligh wind on a hydrofoil.
• A 12-braid technology line with high breaking load and low elongation due to the Dyneema SK99 fiber.
• Spliced and sewn line ends for the strongest connection.
• Precision high strength micro stitching with high strength UV treated thread.

Specifications:
 

All Lines
Diameter [mm] - 1.3mm    
MBL - 380 daN
Rated - 850 Pounds
Color Coded - Red, Grey, Grey, Blue
Spliced and Sewn Line Ends

NEW - PKS Compression Bag V2 - Ultralight

All new Ultralight material, the lightest compression bag on the market. All the same features of the new V2 Compression bag with an internal pocket for self storage and storing small items while the bag is in use. Zero Plastic used in shipping, Storing the compression bag.

Replace your heavy kite bags with these light-weight and durable PKS Compression Bags. You won't believe how much weight and space you can save when packing for a trip. The PKS Compression bag is large enough to fit most kites, including your gigantic light wind kite.

The PKS Compression bags are a must have for travel. They save so much room and weight it is incredible plus there are no annoying zippers to mess with. These bags keep you nice and organized, protect your kite, and greatly lighten your load. Makes packing for a trip much easier and saves room for that extra kite to sneak in your bag. Trust us, after you get these for your kites you will not know how you ever traveled without them. The weight you save will pay for these bags after just one trip.

Like the Dakine compression bag, this bag weighs less than the standard kite backpack to provide protection for your kite during travel while reducing weight and packing size. Unlike the Dakine compression bag, the PKS Compression Bag has reinforced straps that are sewn all the way around the bag for better compression with less stress on the bag and no chance of ripping the bag open.

Compression Bag Dimensions

•  60 x 25 x 30cm (~24 x 10 x 12 inches)
•  Weighs Only 6 Ounces

When Folded into its Own Storage Pockett:

•  18 x 15cm (7 x  6  x 1.5inches)

Features

•  New - Ultralight Non-padded shoulder strap
•  Drawstring cinch top keeps contents contained
•  New - Ultralight Ripstop Material for reduced weight without sacraficing strength
•  High visibility location for writing kite size and contact details
•  New - Internal Storage and Self Storage pocket