Mystic Hook Knife and Sheath

Aluminum knife and pocket can be mounted anywhere on your harness for easy access. The sheath has a loop that you can feed your harness straps through, putting the knife to the left or right of your harness hook. Of course, if you have a preference, you can put the knife anywhere you feel it will be most accessible in an emergency.

This knife isn't guaranteed to save your life or prevent injury, but it works in your favor. There are no guarantees in life. The best thing is that you hope to never need it. However, if you do, you'll be glad you have it.

• Includes a small loop to mount on any harness by slipping the webbing strap through
• Cuts lines and webbing
• Stainless steel blade
• Not rustproof, rust resistant -- check it often.

The Naish 200 one pump valves are the original factory valves for Naish kites from 2020 model year and newer. The 90 degree one pump valve is for the struts and the Straight valve is for the leading edge.

Fixmykite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have. Just Stick and Ride!

The FoilMount uses a specially designed 3M adhesive to stick to the bottom of your board. It will accommodate any foil that uses the 90mm track system (this is industry standard). It is an easy way to fix a broken track system on a production board. It is also great for retrofitting boards with through-bolt holes to give them the adjust-ability of a sliding track system.

The FoilMount is very easy to install; just clean the surface, prep the surface with alcohol, peel the backing on the adhesive, and finally stick onto the desired location.  Always dry-fit your mounting location before install because once it is stuck it is down for good.  

The FoilMount needs to be mounted on a flat surface with no concave or tail rocker.  It can be removed but cannot be reused.  

 

Ridge Mount FoilMount

This is the standard mount with a relief cut down the middle allowing for a mount on top of a ridge on the bottom of the board. The surface still needs to fairly flat, but allows for a slight ridge where the FoilMount will be installed.  It is suitable for most SUP boards, hydrofoil boards, Skim boards, Surfboards.

The 2.0 Standard now includes:

• Upgraded FoilMount plate with one piece adhesive backing
• 4 high strength brass or stainless steel slider nuts
• 1 set of 4 flat head M8x16mm bolts for Slingshot, Liquid Force, Cabrinha, and most other hydrofoils.
• 1 set of 4 flat head M6x12mm bolts for Takuma Surf hydrofoils
• 1 set of 4 pan head M8x20mm bolts for Moses and older Liquid Force foils (instructions, alcohol pads, scotch-brite pad, FoilMount plate)

The Dakine compression kite bags are a must have for travel. Replace your heavy kite bags with this light weight compression bag. You won't believe how much weight and space you can save.  A true space and weight saver.

Dakine's kiteboarding specific hook knife has 2 anodized Aluminum opposing blades for easy and instant cutting. This product does comes with an easy-mounting sheath with sewn-in loop to mount to your harness or other location.

The Naish 200 one pump valves are the original factory valves for Naish kites from 2020 model year and newer. The 90 degree one pump valve is for the struts and the Straight valve is for the leading edge.

Fixmykite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The Ozone Contact Foil Freeride Control Bar is meant for use with Ozone's latest depowerable foil kites: the Hyperlink, Chrono, and R1. Featuring brand new soft-bar ends, a push-away release system, an above-the-bar clamcleat depower system, and a brake strap for help with foil kite launching, landing, and inflating.

A clean and simple design, the Ozone Contact Foil Freeride Control Bar features an easy-to-use trim system and features our latest innovation - the Ozone Megatron Click-In Loop.

The innovative Ozone Megatron Click-In Loop is an all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply 'clicking' in the loop. The Click-In Loop is AFNOR NF S52-503 certified.

What's the first thing you do when you get in a car? You click in your seatbelt, hearing that 'click' sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our new release system, the Click-In Loop, is inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.

The Contact Foil Control System V4 comes in 38cm, 45cm, 50cm, and 55cm bar lengths with foil brake handle and ships standard with a medium size loop.

​

Features

•  Exceptional Ozone Factory Construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
•  Innovatice Click-In Loop - An all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply 'clicking' in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
•  Two Release Modes - The Click-In Loop offers riders a choice of two release modes, the recommended Standard or the optional Expert mode.
  • Standard mode offers 100% flag out in all situations by releasing the Click-In Loop or letting go of the bar when un-hooked.
  • Expert mode offers 100% flag out only when the Click-In Loop is released whilst hooked in, allowing riders practicing handle passes to miss the bar without releasing the kite to flag out (not recommended).
•  Three Loop Size Options - Small, Medium and Large size harness loops are available for the Click-In Loop. Choose the Small if you ride hooked in only, have a shorter arm reach or prefer the bar closer to your body. The Medium size is perfect for most riders. The Large size is designed for unhooking or riders with a longer arm reach.
•  Spinning Head with Anti-twist Flag Out Line - Our custom Stainless Steel Swivel Ring locates into the Click-In Loops rotating internal core. When manually turning the Spinning Head to un-twist front lines, the Flag Out Line rotates in unison with the core keeping all lines twist free.
•  Soft Bar Ends with Leader Line Adjustment - Soft bar ends for comfort and are less likely to damage lightly constructed boards. The leader lines are adjustable via knots inside the float, simply pull out from the opening to access and adjust to your preference.
•  Stainless Steel Leader Line Pin - Superior strength is achieved with a Stainless pin running through the bar. This creates an ultra strong and direct connection between the control bar to flying lines.
•  Light Weight Aluminum Center Piece - CNC cut Aluminium centre piece reduces weight. The low friction design reduces wear.
•  Ergonomic EVA Grip - 3D pressed EVA grip with ergonomic shaping provides the ultimate bar grip.
•  PU Covered De-Power Line - The tough PU covered de-power line significantly reduces wear when sheeting in and out.
•  Stainless Steel Trimmer Bracket - The smooth running trimmer bracket prevents trim line wear.
•  Clamcleat Trimmer - Anodized low abrasion Clamcleat trimmer with custom designed trim grab handle.
•  Re-launch Balls - Fixed to the leader lines to pull when re-launching the kite.
•  500kg/300kg Flying Lines - Colour coded 500kg front / 300kg back lines using the highest quality Dyneema available.

The Ozone Performance Foil Kompressor Bag keeps the leading edge plastic profile battens contained in the same way we pack the kites in our factory and the same way paragliders are packed. We highly recommend using it as this protects the kite and the leading edge battens from potential deformation. Light weight and durable.

The Naish XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Naish Kites.  This valve is also campatabile for use on Airush 2015 and later kites.

Ozone kite compression strap.  Comes standard with all water and snow  kites and this spare strap works great to keep your kite neat and  folded.<br />

Are you looking for an inexpensive and universal introduction to kiting and you are not yet committed to a specific direction? Whether you want to enjoy kitesurfing, land kiting or just for fun, the Fluxx is the right choice for you. We have attached great importance to easy, stable handling and good balanced flight characteristics. Even if the Fluxx has a ground contact, the sturdy, strong,  and special shaping means that it can be relaunched with only two lines. Use the Fluxx as a trainer kite and open up the fascinating world of kitesurfing! Become a part of our passion.

PROPERTIES:

    Completely leashed and ready to fly
    Stable Flight behaviour
    Automatic Relaunch
    Robust processing
    Perfect as preparation for the introduction to power kiting

 

CONTENTS:

    Sleek HQ4 bag with tag insert
    Control Bar
    Trainer Kite Guide
    Optional Accessory: Safety System- This safety system for 2-line control bars makes it possible to release the control bar in an emergency without loosing the kite.

The Naish Surelock High Flow Inflate / Deflate Valve for 2020 and Newer Naish Kites and Wings.

Also Works on: 2021+ Crazyfly Kites,F-One, Flysurfer with SUP style valve.

The Naish XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Naish Kites.

The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve).  Choose from male, famale, or both to complete your replacement

The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve).  Choose from male, famale, or both to complete your replacement.

Q-PowerLine Pro is the only line specifically engineered for  Kiteboarding/Power Kite applications, and it's no wonder there's nothing  better when you see what it is  high-strength, low-weight, low-drag,  coated line reduces tangling. You can tie your own knots in this line  without weakening line.

The PKS Self Launch Tool: We would like to introduce you to another innovative Product that most everyone can use! This little tool is what every KiteBoarder needs in their arsenal. For those days when everyone else is working and you find you’re self alone at your favorite Kite Spot and no one to launch or land your kite. Now you’re no longer limited to needing someone to launch or land your kite.
 

The new, versatile, sheaveless Shock Block by Ronstan is only 7/8&quot; long, yet it is very strong, super lightweight and designed for performance.

The Duotone/North Airport Inflate/Deflate Valve will replace the inflate/deflate on all North 2014-2018 models except the 2014 Vegas and all 2019 Duotone kites.This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.  Made with TearAid to work with any bladder.

From the leader in repair technology, FixMyKite.com's Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

Slingshot replacement lock tube (Donkey Dik) for the chickenloop on Slingshot Compsticks from 2010 - 2014

Wizardhat Hardware Set

This is the Wizardhat hardware only set.  If you just need some extra hardware

This hardware set will work with any base plate or 4-bolt tracked board on the market.  This included M8 or M6 base plates and tracks.  There is no more need for T-nuts or different sized bolts the Wizardhat will work on any.  Also, the way the bolt sticks up through the track on top makes it easy to line up with the base plate.

The Wizardhat hardware only set comes with 4 qty Wizardhat hardware (includes cone nut, t-bolt, and t-slider with a decal.   

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

The new, versatile, sheaveless Shock Block by Ronstan is only 1 7/16&quot; long, yet it is very strong, super lightweight and designed for performance.

NORTH HYPERFLOW INFLATE VALVE works on new North kites starting in 2020 and beyond. Valves also work on Slingshot, Cabrinha, and Eleveight kites. Made with Tear-Aid to work with any bladder

How to install a fixmykite.com self stick valve?

1. Valve Removal: If replacing valve, carefully peel off old valve. If old valve does peel off, cut around circumference of valve to remove
2. Cleaning: Wipe area where valve will be placed with provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

*Pro Tip- Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the Fixmykite self stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.

If you’re unsure which value is required for your replacement project, please do not hesitate to contact us. Email:  [email protected] or Call 361-883-1473


Add Velcro Option
The "Add Velcro" option provides you with attached Velcro at the base of the valve just as you would see with the original factory bladder.  This part of the valve goes on the inside of the kite casing; the Velcro prevents the bladder from twisting when tightening the screw-cap. 

MEGA Option: The MEGA valve option refers to the size of the TEAR-AID PATCH ONLY.  MEGA patches are 4 inches in diameter as opposed to the standard valve patch which has a 3” diameter. This extra inch means 77% more adhesive base and surface area compared to the standard valve patch size. The MEGA-valve patch is necessary when the old valve is cut from the bladder or leaves a tear during removal. The additional surface area provided by the Mega valve Tear-Aid patch allows quick and easy bladder repair eliminating the need for an additional bladder patch. The Mega Valve Patch can also be used if the valve area of the bladder is warped.

If your old valve(s) cleanly peel(s) off, a larger Mega patch in most cases isn’t necessary.

Add Bladder Patch Install Kit Option
The Bladder Patch Install Kit is for use when your old valve has to be cut out of the bladder leaving a hole larger than the valve. If your old valve peels off of your bladder easily, you do NOT need the bladder patch kit. The Bladder Patch Install Kit includes a baggie of talcum powder and a 6x6-Inch (15.24 x 15.24cm) adhesive patch.

PKS KISS Loop V2 - Quick Release System

There's a new quick release system on the market aimed at keeping it as simple as possible: the PKS KISS Loop. Jeff is always working on new things and his most recent project is designing the most simple quick release the kite industry has seen. It's recommended for experienced kiters who want to build the most minimal and easy to use bar setup for foiling and light wind use.

The FixMyKite.com North Lazy Pump Gen. 2 Valve is the OEM valve North kites used for all one-pump connections from 2013-current 2016 models (Generation 2). Made with TearAid to work with any bladder.  (Also compatible with 2015 or newer CrazyFly One-Pump systems.)

The Carabiner Clip is ideal for extensive multiple functions and uses, as they are made to easily change out on different material without the need to restitch or sew material into a closed loop.  There is no closed loop on this clip for that purpose.

PKS M6 Studs for mounting Hydrofoil on deck with inserts.

Works with M6 Inserts and m6 hardware like the Wizard Hat Cone nuts.

Includes a set of 4 M6 Studs
  

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

The FixMyKite.com North Inflate non-return Valve is the OEM valve North kites used from 2011-2013 plus the 2014 Vegas. A unique non-return valve, it allows for 1-way airflow for Inflation only. Made with TearAid to work with any bladder.

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is high strength, low weight, low drag, coated line reduces tangling. SPOOLS come in 2 length options.

Wizardhat Hardware Set

This is the Wizardhat hardware only set.  If you just need some extra hardware

This hardware set will work with any base plate or 4-bolt tracked board on the market.  This included M8 or M6 base plates and tracks.  There is no more need for T-nuts or different sized bolts the Wizardhat will work on any.  Also, the way the bolt sticks up through the track on top makes it easy to line up with the base plate.

The Wizardhat hardware only set comes with 4 qty Wizardhat hardware (includes cone nut, t-bolt, and t-slider with a decal.   

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

The FixMyKite.com North Lazy Pump Gen. 1 Valve is the OEM valve North kites used for all one-pump connections from 2011-2012 (Generation 1). These also will work on the Best Kites' one-pump systems from 2013 and newer. Made with TearAid to work with any bladder.

Wizardhat Cone Nut Set with m6x25mm Studs

This is the Wizardhat Cone Nuts with m6 x 25mm Studs.  If you just need some extra hardware.

Includes a set of 4 Cone Nuts with m6 x 25mm Studs

PKS M6 Studs with M6 Flanged nuts for mounting Hydrofoil on deck with inserts.

Includes a set of 4 M6 Studs and Flanged Nuts
  

*Be careful not to overtighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.

The FixMyKite.com North Airport Inflate/Deflate Valve will replace the inflate/deflate on all 2014-2016 models except the 2014 Vegas.  This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.

There's a new quick release system on the market aimed at keeping it as simple as possible: the PKS KISS Loop. Jeff Howard is always working on new things and his most recent project is designing the most simple quick release the kite industry has seen. It's recommended for experienced kiters who want to build the most minimal and easy to use bar setup for foiling and light wind use.

Leader Line for Kitesurfing, Landkites, and Snow kites. Sewn loops can be added to one or both ends, and lines can be made to any length desired.

The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs through the center of the chickenloop, bar, and depower system. This line can be used to easily replace the lines on Ozone Contact water bars 2011+ model year for both Ozone Megatron and Megatron II Chickenloops.

Ronstan Pulley used on larger foil snow sites as well as Naish Kites.

Replacement rope for 2016+ sliding rope spreader bars from Ride Engine.  Fits all spreader bar sizes.

The FixMyKite.com Duotone 90 Degree One Pump Valve is the OEM valve Dupotone kites uses for Struts One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

M8 Hydrofoil Track Stainless Steel T-Nuts

These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  These are low profile meaning they are thinner than stock brass T-nuts by about 2.2mm from top to bottom but STRONGER.

Sold individually

Slingshot Sentry V1.1 Control Bar

The Sentry V1.1 kite bar has new PU coated center lines which allow for smooth & effortless bar travel with added durability. Our all new quick release is proven and ISO certified, ensuring the quickest and most dependable safety release.

Click-in chicken loop technology meets intuitive, auto-swivel, and line untwisting in this all-new, state-of-the-art control bar. The Sentry bar has been thoroughly tested and is proudly ISO-approved.

Slingshot is proud to introduce the pinnacle of kiteboarding control systems: the Sentry V1.1. They have combined comfort, performance, and dependability into one elegant design that gives riders a cleaner, easier, and higher performance experience on the water. By collaborating with their team riders and listening to their customers Sentry designers dissected their past control bar technology and developed one of the most comprehensive and intuitive systems on the market.

The FixMyKite.com Duotone Straight One Pump Valve is the OEM valve Dupotone kites uses for Leading Edge One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

M6 Hydrofoil Track Stainless Steel T-Nuts

These are Replacement M6 Stainless Steel T-nuts for the any hydrofoil that uses the M6 T-nut including Takuma, Naish and others  These are hard to get replacements that we now have in stock.  They are sold individually,  so if you need a set of 4 make sure to buy 4 of them.  Watch the video below for our testing of the M8 version against the brass version.

Here are the total dimensions of this part:

Track width: 8.5mm
Total width: 14.9mm
Total length: 23.9mm
Total height: 6.20mm

M8 Hydrofoil Track Brass T-Nuts

Extra brass T-nuts for your tracked hydrofoil.  These are salt water approved and perfect for all track systems.  They are M8 standard metric threads which is the convention for most hydrofoil tracks.

Sold Individually

The Ozone Big Boston Inflate/deflate kiteboarding Valve will replace the inflate/deflate on 2011 and newer Ozone Kite. This valve is also a compatable replacement for the Max Flow Valve from Liquid Force Kite (2011 and later) and All Switch kites. 

Ozone pigtails for a 4-line kite. These replacement pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines.

These parrel bead stopper balls are UV stable and impact resistant. They measure 20mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.

The Ozone 90-Degree One Pump valve is the original factory valve for 2014 and newer Ozone kites with a one-pump system. Low-profile shape will also retro-fit onto any 2007-2013 Ozone kite with a one-pump system. This valve is also a compatible replacement for Slingshot, 2013 Crazyfly, Star, Flexifoil, Mutiny, and Ben Wilson kites.

All new High Volume valve for 2021. A higher volume valve with a and more stable material to prolong the life of the valves is now being used.

This Valve requires the use of a larger diameter one pump hose