Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
Details
The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.
The Ozone leash makes passing over your head and around your back even easier. Ozone quality with super strong webbing, bungee covered with extra soft neoprene, and a snap shackle for easy hooking in and out. This leash can handle anything you throw at it and is built for safety with a push away top hat quick release.
The PKS EZ Leash Connect is the perfect product to put your leash attachment where you want it on your harness. Simply larkshead this to the spreader bar, leash ring, or back of the harness to create a quick accessible leash connection point.
12m + 10m Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Shorter 8m + 2m line extensions are also available as an accessory for those wanting 18m or 20m lines for wave riding or tighter kiteloops.
Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m. If you want to lengthen your lines, just choose what length works best for you! Includes: 4 Lines with spliced loops on both ends
Dacron Tape should be used to repair all cuts in the leading edge and stuts of a inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
The Bravo 20-2 Electric Pump has everything you need to pump your kiteboarding kite, stand up paddle board (SUP), raft, boat, kayak, or other inflatable items all in one convenient package.
6m Dyneema line extensions for those wanting custom lines for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Includes:
8m + 2m Dyneema line extensions for those wanting custom 18m or 20m lines for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Includes:
All new, the ultimate Shop / School / Dock / Boat pump. Real world test; Pumps a kite twice as fast as the Bravo 20. We pumped over 25 Kites in our repair shop on a single charge.
Key features:
GE 25 SL
The PKS Pro Flow V3 kite pump is the next ingredient for your successful kite session. Our tweaked version of the newest and best pump on the market is constructed with high quality components and measures 20" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.3 liters of air per pump. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time.With high grade shaft and piston seals, the v3 PKS Pro Flow Pump will outlast any other pump on the market. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
This newly engineered pump features a PSI gauge integrated into the handle, foam air filter to catch sand, new premium extra-durable and flexible hose, pump adapters for standard 9mm inflate as well as larger boston screw valves, ergonomic handgrips and foot base, and kite tether.
The latest and greatest PKS Pro Flow V3 MEGA kite pump is the next ingredient for your successful kite session. Our tweaked and upgraded version of the newest and best pump on the market is constructed with high quality components and measures 24" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.9 liters of air per pump. The taller pump is great for taller people or getting more air per stroke than other pumps. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
CrazyFly really outdid themselves with this year's kite pump. It boasts many new features, most note worthy being the addition of a valve which controls pressure and capacity. When closed, the pump moves air on both the up and down stroke for high capacity and when the cap is open is only moves air on the down stroke for high pressure pumping.
Didn't pumping your kite go fast enough? Then you need the Duotone Kite Pump XL. The XL version of the kite pump has more volume so you need less pumps to fill your kite! Just like the standard version of the Duotone kite pump, the XL also has a double action and a single action stand. Start pumping up your kite in the double action stand and do the last few pumps with the single action stand so that you can pump up your kite as hard as you want for higher pressure. The pump is equipped with a good pressure gauge so you always know if your kite is hard enough. The Duotone Kite pump XL can be used to inflate kites with the valves of Duotone and North but also boston valves like those on Naish, Cabrinha and Core. Features
By far the best pump to quickly inflate your kite, the Kite Pump Extreme features a new Flex Hose which is ultra flexible and durable. With a longer body and high-airflow piston, this pump gets a lot of air into your kite in one go, meaning you can be on the water in no time. The Kite Pump also has an integrated gauge meter for immediate measuring.
North XL Kite Pump, 24". Includes heavy duty hose for long life of use.
Features
New 2017 Slingshot Kiteboarding Kite Pump with pressure gauge, integrated sand filter, premium high-flow and extra-durable hose, and the two extra kite nozzles to fit most most kites on the market.
The PKS Universal Pump Adapter/ Nozzle - Set fits on standard kite pump hoses with a bayonet connection. The set includes an adapter for compatibility with pretty much any kite out there.
The New PKS Universal V2 Valve adapter for Naish, Flysurfer, F-One, Core kites. Works with Reactor Valve, Speed 2.0 Valve, Free Flow Valve and Surelock Valves.
Bayonet Hose Fitting
This is replacement Bayonet fitting that is on the outlet side of the Hose where you connect an adapter or directly to kites. The fitting is a compression fitting that needs to be glued in place with something like Aquaseal or Seam grip to ensure it stays in place and maintains an air tight connection.
The Cabrinha Airlock 1 Screw Valve adapter: compatible with 2013 and prior Cabrinha kites (and 2008 Best EZ screw valves)
This big Boston valve (screw valve) pump adapter / nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), Naish, Crazyfly, Airush (2015 and newer,) and Switch kites.
This threaded big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer), and Switch kites. This adapter screws onto the top of the Boston valve for a more secure fit compared to the friction-fit adapters typically found on most pumps.
The North and Core Pump Adapter/Nozzle is compatible with Core kites and newer North kites (2013 and on), Duotone kites, and Cabrinha Airlock 2 kites.
The PKS North/Duotone Airport Pump Adapter/Nozzle with silicone sealing ring is compatible with 2013 and newer North kites, and 2014 and newer Cabrinha kites with the Airlock 2 screw valve.
This adapter was built to fit newer model heavy duty pump hoses (2016 and newer.) The adapter does also fit older model pump hoses (prior to 2016) very tightly but does not lock in like standard OEM adapters. The adapter can be used as is or may need to be modified by filing down the tiny nub near the ridge of the adapter where it connects to the hose.
The Liquid Force Valve Pump Adapter/Nozzle is compatible with Liquid Force kites manufactured 2011 and later with the Max Flow valve.
The 7mm and 9mm Pump Adapter is compatible with almost all kites prior to about 2008. Nearly all older kites which include the 2 valve inflate and deflate systems included 9mm or 7mm valves. This is also the adapter used for inflating struts on kites without a one-pump system.
Replacement Shaft and Piston seals for PKS Pro Flow pumps or any HP1 / HP3 pump. Use these replacement seals to make your pump act like it is brand new again.
With only a few exceptions, the PKS HD Premium Pump Hose will fit most any Kite/SUP pump out there (new and old) and is heavy-duty, flexible, and kink-resistant. The MALE end of the hose attaches to the pump while the FEMALE end attaches pump adapters/nozzles.
Before now, hoses have not been sold separately. Manufacturers would rather sell complete new pumps rather than a replacement hose. Most kite pump hoses are not super-duty and crimp, kink, or crack over time, but now you can replace them easily and at a fantastic price. This is the same hose on the PKS Pro Flow V2 AND v3 Kite Pump.
The PKS HD Replacement Pump Hose will fit on most kite brands* new and old pumps including Airush, Best, Blade, Cabrinha, Crazyfly, Epic, F-One, Flexifoil, Liquid Force, Naish, North, Ozone, Slingshot, Wainman, and more. *Note: This replacement hose will NOT fit on the old PKS PowerFlow Pump or the new WMFG.
Replacement silicone rings for PKS pump adapters. Sold individually
The Adjustable H3 SUP Pump Adapter is compatible with a variety of stand up paddleboards and Flysurfer. There are three colored rings on the adapter that allow it to fit a variety of H3 valve depths. The black ring is rubbery and provides a good pressure/friction fit while the yellow and green rings are made from plastic and can be taken off to custom-set the depth of the valve. Inside the middle of the adapter there is also a screw that has and adjustable height.
HP2 SUP Pump Replacement Seal Kit Replacement Shaft and Piston seals for PKS Pro Flow pumps or any GRi HP2 pump. Includes Piston and Shaft Seals Use these replacement seals to make your pump act like it is brand new again.
Replacement pump leash for pumping up your kite
This is a simple kite leash attachment point extension for connecting your pump while pumping your kite.
This Bravo 20 Electric Pump battery will replace the battery in a Bravo 20 or Bravo 20-1 pump. It's a 12 volt, 7-9 amp hour lead acid battery. To install the battery you will need to open up the pump by removing the screws in the bottom and back of the pump. Note: Please keep the battery charged when not in use to prolong battery life. The first charge may take as long as 12 hours to fully charge the battery. To store the pump for a long period of time without it being used, charge the battery to full and remove the fuse from the back of the pump.
This is a replacement Main and Control PCB, with cables. part SP Z052 for the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
This is a replacement Top Case / Cover with Gauge and Control PCB installed. part SP Z144 for the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
This is a replacement Piston Group / Compressor Unit part SP Z146 go the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
2" Wide (Two-inch Wide) Dacron Tape should be used to repair all cuts in the leading edge and struts of an inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
Dacron Tape should be used to repair all cuts in the leading edge and struts of an inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
Tear Aid Bladder patches are the BEST patch out there to seal leaks and small cuts in bladders. The roll can be cut into any size desired for patching, whether your bladder problem is small pinholes or 2-foot long cuts. 30 ft. x 1.25-Inch or 3-Inch or 6-inch Rolls (60 patches). Note that long cuts (more than 6 inches) or cuts next to the seam of bladder can be harder to ensure a good seal on. Long cuts are rarely straight lines.
The PKS Smart Wing Leash System includes the PKS Smart Cuff, a wrist cuff with multiple "locking" features to ensure the leash is not inadvertantly pulled off your wrist. The Elite Universal leah line with locking Larks Head Loops and the PKS Quick Connect Pigtail for quick and easy connections to any wing. PKS Smart Cuff Wrist Leash Cuff: The PKS Smart Cuff is a purpose built Wrist cuff for wingboarding that has two different "locking" features. The first is the Flat Lock low profile "tounge" that keeps the velcro closure flat and even help to prevent anything getting under it and opening the wrist leash. The second is The Over Lock perpindicular velcro closure that closes across the main velcro strap to prevent the wrist cuff strap from inadvertantly being opened.
PKS - Elite Universal Wing Leash: The PKS Wing Leash is made using heavy duty 3/16" Spectra hollow core line with high elasticity bungee line inside. The ends have 7/64th spectra line that has been wrapped and sewn in place creating a locking larks head for the ultimate strength, security, and versatility. By using the 7/64" spectra line for the loops, you are able to easily connect to multiple wing or harness connection types sush as hand shake, larks head, or ring connections. This combination gives you strength, versatility and ease of use. PKS Leash Quick Connect Pigtail With Stopper Ball: Designed to be used with Wing leashes for a quick connect and removal from one wing to another. No need to have a leash for every wing, just easily move your leash from wing to wing using the Quick Connect pigtail with stopper ball.
PKS Smart Cuff Wrist Leash Cuff:
The PKS Smart Cuff is a purpose built Wrist cuff for wingboarding that has two different "locking" features. The first is a low profile "tounge" that keeps the velcro closure flat and even help to prevent anything getting under it and opening the wrist leash. The second is an over lock velcro closure that closes across the main velcro strap to prevent the wrist cuff strap from inadvertantly being opened. Key Features:
The PKS Wing Leash is made using heavy duty 3/16" Spectra hollow core line with high elasticity bungee line inside. The ends have 7/64th spectra line that has been wrapped and sewn in place creating a locking larks head for the ultimate strength, security, and versatility. By using the 7/64" spectra line for the loops, you are able to easily connect to multiple wing or harness connection types sush as hand shake, larks head, or ring connections. This combination gives you strength, versatility and ease of use.
Designed to be used with Wing leashes for a quick connect and removal from one wing to another. No need to have a leash for every wing, just easily move your leash from wing to wing using the Quick Connect pigtail with stopper ball. The Quick Connect Pigtail set allows you to have a much larger stopper to ensure that the connection is sure to hold.
PKS Adjustable/Universal Wingboarding Harness line.
The PKS Adjustable Wingboarding Harness Line is adjustable for length and will attach to wings with handles as well as wings with a boom.
PKS Wingboarding Rigid Handle/Boom Harness Line Easy Connect
The PKS Wingboarding Harness Line Easy Connect Adapter is an adapter for attaching the Wingboard Harness Line to a boom or rigin Handle on your wing. Sizes:
Includes 1 Harness Line Easy Connect
PKS Wingboarding Harness Line Pigtail Adapter
The PKS Wingboarding Harness Line Pigtail Adapter is an adapter for attaching the Wingboard Harness Line to the handles or knots on your wing.
The PKS Adjustable Wingboarding Harness line is adjustable for length and will attach to wings with handles as well as wings with a boom.
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next »
Forgot your password?
Already Registered?
OR
