Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
Choose which Cabrinha Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Cabrinha kiteboards from 2014 to the current model year.
Crazyfly Kiteboarding Hexa Binding screws and washers. Great replacements if you ever lose a screw on the water or during travel.
Choose which Naish Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Naish kiteboards from 2015 to the current model year.
Stainless steel rings are 1" diameter and are useful replacements in many bar/line set-ups and Depower Replacment lines. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. 1-Inch Diameter
Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacment lines. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.
FMK Bridle Repair Kit
Ripstop sail tape is the best way to repair cuts in the sail of your kite. This "peel and stick" Nylon tape will provide the strength needed to repair small cuts in your kite to get you back out on the water fast. *Can also be used on paragliders and sails.
stop sail tape is the best way to repair cuts in the sail of your kite. This Nylon tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
Ripstop sail tape is the best way to repair cuts in the sail of your kite. This Nylon tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally. The clear tape will blend into any kite color and will be almost invisible when the kite is in the air.
Ripstop sail tape is the best way to repair cuts in the sail of your kite. This Nylon tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
The Bladder-Patch Install Kit which includes a bladder protection sheet and a 6x6-Inch (15.24 x 15.24cm) Patch. If your screw valve has to be cut out of the old bladder, then you need the Patch Install Kit.
Fixmykite.com again brings you the latest and great kit to keep you kiting longer. This Tear Aid patch kit includes 3 different sizes of pre cut and rounded Tear Aid patches that cover a multitude of repairs.
Tylaska T5 Trigger Release Snap Shackles are perfect for kiteboarding and small boat applications requiring immense strength and low weight. They have a breaking strength of 5,000 pounds and weigh just 2.2 ounces in the standard bail configuration. Features:
Nasih 20m Back/Outside lines, standard lines Naish line colors, Red, Blue, Back/OutsideLines
The Ozone Foil Stall/Brake handle attaches to the 2015+ Contact Water and Contact Race Control bars to convert the bar to Foil Freeride and Foil Race bars. The brake strap attaches around the relaunch balls with a bungee to the steering leader lines. These stall handles come standard on all Ozone snowkites/foils.
Line Extensions allow you to tune your kite lines to the exact length that you want. Extensions are made in a set of four (4) from 700 lbs. line with sleeved and sewn loops on both ends.
CUSTOM lengths are possible, including mixing lengths for outer and inner lines.
Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.
Ozone line extensions are made to be used with all Ozone water kites and the Ozone Contact Water, C4, or Race Control Bars. Adding extensions to your lines can give your kite that extra height to find some cleaner wind and also give you a bit more power for those lighter days.
Ozone Race v2 Fly Line Extensions (2 x 300 kg & 2 x 200 kg) Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even-length lines are compatible with any Ozone Contact Water Freeride, Race bar, and many other bars on the market.
The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.
These extensions are made from Ozone race lines which are made from the highest quality, pre-stretched Dyneema available.
Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.
All Ozone lines are made from the highest quality Dyneema available, they are pre-stretched and sewn in our own factory Features:
Ozone Ignition Trainer line sets made to be used with the Ozone Ignition 3-line trainer kite. These lines also perfect as replacement lines for any 3-line kite or trainer.
PKS Trainer Kite Lines fly above the rest. PKS trainer lines are 200 lbs. white lines for high-visibility, and made from Pre-stretched Spectra to several lengths to fit your Custom needs. Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there.
The PKS MINI Slider-Release Leash is fully releasable under load, and has removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. MINI length = 22 inches (55cm)
The PKS Slider Handle Pass Leash is fully releasable under load by pushing the soft foam handle, and have removable clips on each end. High-strength webbing eliminates material breakdown found in Neoprene leashes. Length = 46 inches (115cm)
2019 Dakine Kite Leash Shorty. Short leash with standard push away release. If you like minimal and functional, this is the leash for you. Clean, simple, and easy to use if you ever need it.
The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.
The Ozone leash makes passing over your head and around your back even easier. Ozone quality with super strong webbing, bungee covered with extra soft neoprene, and a snap shackle for easy hooking in and out. This leash can handle anything you throw at it and is built for safety with a push away top hat quick release.
The PKS EZ Leash Connect is the perfect product to put your leash attachment where you want it on your harness. Simply larkshead this to the spreader bar, leash ring, or back of the harness to create a quick accessible leash connection point.
12m + 10m Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Shorter 8m + 2m line extensions are also available as an accessory for those wanting 18m or 20m lines for wave riding or tighter kiteloops.
Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m. If you want to lengthen your lines, just choose what length works best for you! Includes: 4 Lines with spliced loops on both ends
Dacron Tape should be used to repair all cuts in the leading edge and stuts of a inflatable kite. The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.
The Bravo 20-2 Electric Pump has everything you need to pump your kiteboarding kite, stand up paddle board (SUP), raft, boat, kayak, or other inflatable items all in one convenient package.
6m Dyneema line extensions for those wanting custom lines for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Includes:
8m + 2m Dyneema line extensions for those wanting custom 18m or 20m lines for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of line and 12m lines are ideal for schools to teach with and for foil racing. Includes:
All new, the ultimate Shop / School / Dock / Boat pump. Real world test; Pumps a kite twice as fast as the Bravo 20. We pumped over 25 Kites in our repair shop on a single charge.
Key features:
GE 25 SL
The PKS Pro Flow V3 kite pump is the next ingredient for your successful kite session. Our tweaked version of the newest and best pump on the market is constructed with high quality components and measures 20" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.3 liters of air per pump. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time.With high grade shaft and piston seals, the v3 PKS Pro Flow Pump will outlast any other pump on the market. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
This newly engineered pump features a PSI gauge integrated into the handle, foam air filter to catch sand, new premium extra-durable and flexible hose, pump adapters for standard 9mm inflate as well as larger boston screw valves, ergonomic handgrips and foot base, and kite tether.
The latest and greatest PKS Pro Flow V3 MEGA kite pump is the next ingredient for your successful kite session. Our tweaked and upgraded version of the newest and best pump on the market is constructed with high quality components and measures 24" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.9 liters of air per pump. The taller pump is great for taller people or getting more air per stroke than other pumps. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time. With high grade, high quality shaft and piston seals, a reinforced aluminum main pump shaft, and a cleanable air filter, the v3 PKS Pro Flow Pump will outlast any other pump on the market. The new high vizibility colors will make it easy to find your pump after you session.
CrazyFly really outdid themselves with this year's kite pump. It boasts many new features, most note worthy being the addition of a valve which controls pressure and capacity. When closed, the pump moves air on both the up and down stroke for high capacity and when the cap is open is only moves air on the down stroke for high pressure pumping.
Didn't pumping your kite go fast enough? Then you need the Duotone Kite Pump XL. The XL version of the kite pump has more volume so you need less pumps to fill your kite! Just like the standard version of the Duotone kite pump, the XL also has a double action and a single action stand. Start pumping up your kite in the double action stand and do the last few pumps with the single action stand so that you can pump up your kite as hard as you want for higher pressure. The pump is equipped with a good pressure gauge so you always know if your kite is hard enough. The Duotone Kite pump XL can be used to inflate kites with the valves of Duotone and North but also boston valves like those on Naish, Cabrinha and Core. Features
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next »
Forgot your password?
Already Registered?
OR
