Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
Crazyfly Quick-Release with Chickenloop is the stock part that comes with all 2018 Sick Bars. Though very similar looking to the 2014, the inner mechanics were changed to be easier to put back together once released. The built in swivel and smooth-release make this one of the cleanest and most simple systems on the market.
The PKS Self-Launch Sand Anchor is another true innovation in the world of kiteboarding and self reliance. This amazing Self-Launch Beach Anchor can be used to self-launch your kite with nothing around but sand.
This Sand Weight Bag is a kiter's essential item. You can use the sand weight bag to stop your kite from blowing away on a windy day, reduce sail fluttering which reduces wear on your kite, and also use for self launching. Every kiter could use one or two of these.
The HitchSafe makes any kiteboarders or surfers life easier. Figuring out what to do with the keys before going surfing or kiteboarding can be a big pain but we finally found a good, affordable solution that only takes a couple minutes to install.
The Hitchsafe replacement cover is made to look like any normal hitch cover, but covers the Hitchsafe stored in the hitch of your truck including your keys and valuables.
The Hitchsafe Extender Pins are for 2005-current Toyota Tacoma and the 2007-current Tundra OEM hitch receivers.
The Ocean Rodeo Go-Joe is everything you need for Leashless board Retrieval assistance: Even stronger, better, lighter, and easier to use than before. A great idea and an innovative product that is moving from beginners to wave riders and mainstream users. If you don't have one it's worth to check it out.
The Oceanus Eel Reel Leash...if you're gonna use a board leash...this is the only choice!
The retractable Oceanus EEL Quick-Release Leash is the latest and most versatile model of reel leash. This Quick Release version allows you to take it off your harness easily and leave it connected to your board.
The Oceanus SUP Flat Water REEL Ankle Mount Leash provides a low-profile, straight-line feed from the ankle to the board leash plug. This model may be worn on the ankle, waist belt, or personal floatation device and the leash extends to clip onto the board leash plug.
The Oceanus Replacement Leash is a Nylon leash with straps stitched at both ends and rated at 460 pounds. This leash is a replacement for the reel part of the leash that fits inside the plastic housing.
The Oceanus Reel Leash Rope extension is approximately 30 inches long, 1/4 inch diameter rope doubled over, stitched, glued, and rubberized. This rope extension goes between the webbing attachment on the board and the spring-loaded hook of the reel leash.
The Oceanus Shock Cord is an alternate attachment to the standard rope extension, and comes with a webbing attachment. The webbing attachment affixes to your board fin-screw area, then you can attach either the standard rope extension or the shock cord. The Shock Cord is shorter and has elastic bungee.
The Oceanus Snap hook replacement is available in case yours wears out. These solid Stainless Steel trigger snap clips are rated at 270 pounds of load, have a bottom swivel, and spring "trigger" snap close.
The Oceanus Webbing Attachment is the part that attaches to the fin box or fin screws of the board. The Oceanus Reel Leashes come with this part, but if yours is looking worn out, it may be time to replace it.
Replacment trim/depower rope for sentinel bar system.
There's a new quick release system on the market aimed at keeping it as simple as possible: the PKS KISS Loop. Jeff Howard is always working on new things and his most recent project is designing the most simple quick release the kite industry has seen. It's recommended for experienced kiters who want to build the most minimal and easy to use bar setup for foiling and light wind use.
Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.
Ozone trimmer handle for V4 or older
Black multi-bore PU tubing with top funnel, 4mm Dynema mainline, split top Spinning Handle. For 2017 or newer
2019 Mystic Kite Safety Leash - Long
Length = 43 inches (110cm)
The PKS Replacement Ozone Speed System is the interface between the fly lines and the bridle of the kite. This speed system works on all Ozone depowerable foil kites since 2009 including the Access, Frenzy, Manta, Summit, Blizzard, Subzero, Chrono, R1 , and Hyperlink. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span.
With the PKS Replacment Speed System, you get the option to order Lines only or complete with the pullies.
The Ozone Contact Bar Flag Out Ring Cone..
Core Sensor 2/2S Pro Chicken Chicken Loop Replacement - Short For; ROTOR Quickrelease length 22cm
Replacement Sensor Bar Safety Line For Sensor 2s and Sensor 3
Replacement Chicken Loop and Finger(lock Tube) for Naish Naish Torque Bar
Replacement Chicken Loop and Finger (lock Tube) for Naish Base Bar or Naish Torque Bar
Replacement ATB (Above The Bar Trim) Naish Torque Loop Chicken Loop, Complete.
Replacement BTB (Below The Bar) Naish Torque Loop Chicken Loop, Complete.
OEM Factory Naish Depower trimline for Torque Bar, ATB (Above the bar) bar system. High strength Spectra Line.
OEM Factory Naish Depower trimline for Torque Bar, BTB (Below the bar) and Base bar system. High strength Spectra Line, stopper ball and expert riders leash connection.
Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.
Naish Line Organizer and swivel. Great for custom bar builds! This is where the center lines connect to the bar. Works as a trimmer bracket for depower line.
Replacement Naish OEM Pulley Bridle Line. This is a replacement for the small section of bridle line that the slider ring slides on for Naish Kites. Includes 1 Pulley Line and 2 stopper balls Sold Individualy
Replacement Naish OEM Pulley Bridle Line and Slider set for a complete Bridle refresh. This is a replacement for the small section of bridle line and the slider ring slides for Naish Kites. Includes 2 Pulley Line and 4 stopper balls, and 2 Slider Rind w/pigtails.
Replacement bladders for Ozone Enduro V1 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order.
Replacement bladders for Ozone Enduro V2 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
Replacement bladders for Ozone Enduro V3 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
Replacement bladders for Ozone Reo V4 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
If you would like to order a bladder that is not in stock, please call 361-704-6659 to place the order
Replacement bladders for Ozone Reo V5 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
Replacement bladders for Ozone Reo V6 are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
Replacement bladders for 2011 and 2012 Ozone Zephyr are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
Replacement bladders for V4 2013-2015 Ozone Zephyr are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce.
The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Race and Foil Race Control Bars V4 Click-In Loop.
Replacement Blue Trim line for the Ozone Race Bar depower system
PKS Stainless steel trimmer bracket / line organizer is a good replacement for many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. Includes:
Replacement Bar End Bungees for Ozone V4 Control Bars. - Set Of Two
Duotone Item No. 44900-8154
Metal Ring (SS08-onw)
Compatibalility:
SS08-onw
Duotone / North Trust Bar
The flagship control system from Duotone gives you the ultimate way to trim your kite without moving your hand from the bar itself. Years ago, it revolutionised the kite industry, and now, it?s upgraded again to make it even better with the new Iron Heart VI Click-In Safety System and FLITE99 lines. Available as in medium with a 49cm bar and 22m lines with 2m extensions or in small with a 42cm wide bar with 20m lines and 2m extensions. Features:
The Click Bar with its Backline Trim Unit was a game-changer when it hit the market; the design has been refined over the years, and it?s become the benchmark in kite control systems. For 2023, there is a new Iron Heart VI which features a Click-In Safety System. This allows you to simply push the chicken loop into the Iron Heart VI for easy connection every time. Perfect for riders using a rope slider bar and a real help when you pop your chicken loop and need to reconnect, especially in the water. The floater is also removable so that you can inspect the leader lines of the bar easily , the progressive pigtails have a reduced sleeving, only where it is needed; this reduces the weight and the drag through the air at a critical connection point to the kite. The new FLITE99 lines from Robline reduce the drag through the air and offer a more direct steering response. The new V Distributor III can be adjusted easily, allowing you to quickly set the front line to split quickly. It can also be removed entirely, very easily, so you can have a very low V; this makes the Click Bar compatible with most kites on the market. There is a Suicide Ring leash connection system; ride it in full safety mode or easily set up suicide for unhooked riding. There is also a Click Bar in Medium with 12m + 12m extensions; this set-up is perfect for kite schools. If you want the ultimate control system for your kites, the Click Bar is the only choice you need to make; there is nothing better! For 2023, it?s refined, tuned and ready to perform at the highest levels of the sport. Details:
The Trust Bar has been the go-to control system for riders who prefer the traditional depower rope and cleat system, but there is nothing traditional about the new 2023 Trust Bar! Instead, it?s packed with the latest technologies, including the new Iron Heart VI Click-In Safety System and FLITE99 lines. This is the only bar you will ever need, as the bar width and line lengths can easily be adjusted to suit your kite. The bar is adjustable between 42 and 49cm with 22m lines with 2m extensions.
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next »
Forgot your password?
Already Registered?
OR